main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xc6233h181mr-g: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray
xc6233h181mr-g-etched.glb Publish 0.1.0 · Ray
xc6233h181mr-g-etched.step xc6233h181mr-g: factory component page (tier=lcsc) · Ray
xc6233h181mr-g-hero.glb xc6233h181mr-g: hero GLB from the etched model (keeps the MPN mark) · Ray
xc6233h181mr-g-hero.overlay.json Publish 0.1.0 · Ray
xc6233h181mr-g.glb Publish 0.1.0 · Ray
xc6233h181mr-g.kicad_mod Publish 0.1.0 · Ray
xc6233h181mr-g.kicad_sym Publish 0.1.0 · Ray
xc6233h181mr-g.lbr Publish 0.1.0 · Ray
xc6233h181mr-g.step Publish 0.1.0 · Ray

XC6233H181MR-G

Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25

XC6233H181MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power supply input, operating over 1.7V to 5.5V with an absolute maximum VIN of -0.3V to +6.0V referenced to VSS.
2 VSS power_in Ground pin to which all voltages are referenced, and the connection point for the dissipation pad where fitted.
3 CE input ON/OFF control, active high: H level 0.9V min to 5.5V max enables the output, L level VSS to 0.3V puts the IC in stand-by, and the internal pull-down holds CE low when left open on type H.
4 NC unconnected No connection.
5 VOUT power_out Regulated output at 1.2V to 3.6V (0.05V steps, ±1% accuracy) with a maximum output current of 200mA, requiring a 1.0μF ceramic capacitor placed close to the pin.

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package SOT-25
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage VOUT(E) 1.78 1.8 1.82 V VOUT(T) 2.0V not met (VOUT(T)<2.0V, ±0.02V), E-0, VIN=VOUT(T)+1V, VCE=VIN, IOUT=1mA 6
Maximum Output Current IOUTMAX 200 mA 6
Load Regulation ΔVOUT 25 45 mV 0.1mA IOUT 200mA 6
Dropout Voltage Vdif 510 630 mV IOUT=200mA, E-1 6
Supply Current IDD 45 87 μA IOUT=0mA 6
Stand-by Current ISTB 0.01 0.1 μA VCE=VSS 6
Line Regulation ΔVOUT/(ΔVIN·VOUT) 0.02 0.1 %/V VOUT(T) 2.0V, IOUT=30mA, VOUT(T)+0.5V VIN 5.5V 6
Input Voltage VIN 1.7 5.5 V 6
Output Voltage Temperature Characteristics ΔVOUT/(ΔTopr·VOUT) -80 80 ppm/℃ IOUT=10mA, -40℃≦Topr≦85℃ 6
Current Limit ILIM 200 255 mA 6
Short Current ISHORT 60 mA VOUT=VSS 6
CE H Level Voltage VCEH 0.9 5.5 V 6
CE L Level Voltage VCEL 0.3 V 6
CE H Level Current (Type H) ICEH 2.5 6 9.5 μA VCE=VIN=5.5V 6
CE L Level Current ICEL -0.1 0.1 μA VCE=VSS 6
CL Auto-Discharge Resistance RDCHG 270 Ω VIN=5.5V, VCE=VSS, VOUT=2.0V 6
Inrush Current IRUSH 95 mA VIN=5.5V, VCE=0 5.5V 6
Input Voltage (absolute maximum) VIN -0.3 6 V 5
Output Current (absolute maximum) IOUT 275 mA (*1) Use within IOUT≤Pd/(VIN-VOUT) 5
Output Voltage (absolute maximum) VOUT -0.3 V Upper limit VIN+0.3 or +6.0 (lower value) (*2) 5
CE Input Voltage (absolute maximum) VCE -0.3 6 V 5
Power Dissipation SOT-25 Pd 600 mW PCB mounted (*3) 5
Operating Ambient Temperature Topr -40 85 ℃ 5
Storage Temperature Tstg -55 125 ℃ 5
Thermal Resistance SOT-25 166.67 ℃/W Board mount, Tjmax=125℃, reference data 29

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper and terminal pin No.1. Each layer has approximately 800mm2 copper 26

CAD (KiCad official)

  • Symbol: XC6233H181MR-G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25 (KiCad packages3D, STEP)
  • 3D model files: xc6233h181mr-g-etched.step / xc6233h181mr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc6233h181mr-g.step / xc6233h181mr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (32 pp, sha256 73a88d038d46ed47, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF