component
XC6228D332VR-G
Public Made by Adomby adom
MSKSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6228D332VR-G
MSKSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
XC6228D332VR-G from MSKSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input for the LDO; the datasheet specifies an input range of 1.2V to 5.5V, with an input capacitor of 1uF or larger placed close to the VIN and GND pins. |
| 2 | GND | power_in | Ground pin; input and output capacitor ground connections must be returned to this pin with short, wide copper traces. |
| 3 | EN | input | Enable control; pulling EN low (VIL 0.4V max, falling) places the device in shutdown mode, and EN high is specified at VIH 1.0V, with EN input current of 100nA max at VEN = 5V. |
| 4 | NC | unconnected | No connection (floating pin) as stated in the pin function table. |
| 5 | VOUT | power_out | Regulated output voltage (XC6228D332 is 3.3V nominal); the datasheet recommends an output capacitor of 1uF to 22uF with ESR above 1mΩ placed close to the VOUT and GND pins, and limits output current to 600mA typical under current limit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 1.2 | 5.5 | V | 7 | ||
| Output voltage accuracy | -2 | 2 | % | ILOAD = 0.1mA | 7 | ||
| Input voltage (recommended operating) | VIN | 1.2 | 5.5 | V | 6 | ||
| Application junction temperature range | -40 | 125 | °C | 6 | |||
| Application ambient temperature range | -40 | 85 | °C | 6 | |||
| VIN to GND | -0.3 | 7 | V | 6 | |||
| VOUT, EN to GND | -0.3 | 6 | V | 6 | |||
| VOUT to VIN | -6 | 0.3 | V | 6 | |||
| Junction temperature | 150 | °C | 6 | ||||
| Storage temperature range | -60 | 150 | °C | 6 | |||
| Soldering temperature | 260 | °C | Soldering, 10 sec. | 6 | |||
| ESD HBM | 2 | KV | HBM | 6 | |||
| ESD MM | 200 | V | MM | 6 | |||
| ESD CDM | 2 | KV | CDM | 6 | |||
| Package thermal resistance, junction to ambient (θJA) | θJA | 200 | °C/W | TA = 25°C, EVB board (Note 2) | 6 |
CAD (KiCad official)
- Symbol:
XC6228D332VR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
xc6228d332vr-g-etched.step/xc6228d332vr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6228d332vr-g.step/xc6228d332vr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (14 pp, sha256
6a7418b4b8c3dbed, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).