component
XC6227C501MR-G
Public Made by Adomby adom
Torex Semicon Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XC6227C501MR-G
Torex Semicon · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
XC6227C501MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with an operating voltage range of 1.7V to 6.0V, and the input must stay within the -0.3V to 6.5V absolute maximum rating. |
| 2 | VSS | power_in | Ground pin, which is the reference for the CE pin and the absolute maximum ratings. |
| 3 | CE | input | Active-high chip enable: a high level of 1.2V to 6.0V enables the IC, a low level of VSS to 0.3V puts it in stand-by, and leaving it open leaves the IC in stand-by on the XC6227C type. |
| 4 | NC | unconnected | No connection pin that is not connected internally. |
| 5 | VOUT | power_out | Regulated output that supports up to 700mA; reverse current is limited to 1.5μA (MAX.) and an external supply on this pin must be 6.0V or less. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Current | IOUTMAX | 700 | mA | VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V | 5 | ||
| Load Regulation | ΔVOUT | 50 | 100 | mV | VCE=VIN, 0.1mA≦IOUT≦300mA | 7 | |
| Dropout Voltage1 | Vdif | 120 | 200 | mV | IOUT=300mA, VCE=VIN | 7 | |
| Dropout Voltage2 | Vdif2 | 40 | 80 | mV | IOUT=0mA, VCE=VIN | 7 | |
| Supply Current | ISS | 100 | 220 | μA | VIN=VCE=VOUT(T)+1.0V, IOUT=0mA | 5 | |
| Stand-by Current | ISTBY | 0.01 | 0.1 | μA | VIN=6.0V, VCE=VSS | 5 | |
| Line Regulation | ΔVOUT/(ΔVIN・VOUT) | 0.01 | 0.1 | %/V | VOUT(T)+0.5V≦VIN≦6.0V, VOUT(T)≧1.0V, VCE=VIN, IOUT=30mA | 5 | |
| Input Voltage | VIN | 1.7 | 6 | V | 5 | ||
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTa・VOUT) | -100 | 100 | ppm/℃ | VCE=VIN, IOUT=30mA, -40℃≦Ta≦85℃ | 5 | |
| Power Supply Rejection Ratio | PSRR | 65 | dB | VOUT(T)≧4.8V, VIN=5.75VDC+0.5Vp-pAC, VCE=VIN, IOUT=30mA, f=1kHz | 5 | ||
| Limit Current | Ilim | 720 | 950 | mA | VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V | 5 | |
| Short Current | Ishort | 55 | mA | VCE=VIN, Short VOUT to VSS level | 5 | ||
| CE High Level Voltage | VCEH | 1.2 | 6 | V | 5 | ||
| CE Low Level Voltage | VCEL | 0.3 | V | 5 | |||
| CE High Level Current | ICEH | 17.7 | 24 | 36.9 | μA | VCE=VIN=6.0V, XC6227C Series | 5 |
| CE Low Level Current | ICEL | -0.1 | 0.1 | μA | VCE=VSS | 5 | |
| Reverse Current | IREV | 0.01 | 1.5 | μA | VIN=0V, VOUT=6.0V | 5 | |
| VOUT Pin Sink Current | IREVS | 2.8 | 5.3 | μA | VIN=5.0V, VOUT=6.0V | 5 | |
| Thermal Shutdown Detect Temperature | TTSD | 150 | ℃ | Junction Temperature | 5 | ||
| Thermal Shutdown Release Temperature | TTSR | 125 | ℃ | Junction Temperature | 5 | ||
| Input Voltage (absolute maximum) | VIN | 6.5 | V | 4 | |||
| Output Voltage (absolute maximum) | VOUT | 6.5 | V | 4 | |||
| CE Input Voltage (absolute maximum) | VCE | 6.5 | V | 4 | |||
| Power Dissipation SOT-25 | Pd | 250 | mW | SOT-25, IC only, Ta=25℃ | 4 | ||
| Power Dissipation SOT-25 (40mm x 40mm standard board) | Pd | 600 | mW | SOT-25, 40mm x 40mm standard board, Ta=25℃, reference only | 4 | ||
| Power Dissipation SOT-25 (JESD51-7 board) | Pd | 760 | mW | SOT-25, JESD51-7 board, Ta=25℃, reference only | 4 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 4 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
XC6227C501MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6227c501mr-g-etched.step/xc6227c501mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6227c501mr-g.step/xc6227c501mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (23 pp, sha256
03781c58b7e1bc8e, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XC6227C501MR-G
**Torex Semicon** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
XC6227C501MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with an operating voltage range of 1.7V to 6.0V, and the input must stay within the -0.3V to 6.5V absolute maximum rating. |
| 2 | VSS | power_in | Ground pin, which is the reference for the CE pin and the absolute maximum ratings. |
| 3 | CE | input | Active-high chip enable: a high level of 1.2V to 6.0V enables the IC, a low level of VSS to 0.3V puts it in stand-by, and leaving it open leaves the IC in stand-by on the XC6227C type. |
| 4 | NC | unconnected | No connection pin that is not connected internally. |
| 5 | VOUT | power_out | Regulated output that supports up to 700mA; reverse current is limited to 1.5μA (MAX.) and an external supply on this pin must be 6.0V or less. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Current | IOUTMAX | 700 | | | mA | VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V | 5 |
| Load Regulation | ΔVOUT | | 50 | 100 | mV | VCE=VIN, 0.1mA≦IOUT≦300mA | 7 |
| Dropout Voltage1 | Vdif | | 120 | 200 | mV | IOUT=300mA, VCE=VIN | 7 |
| Dropout Voltage2 | Vdif2 | | 40 | 80 | mV | IOUT=0mA, VCE=VIN | 7 |
| Supply Current | ISS | | 100 | 220 | μA | VIN=VCE=VOUT(T)+1.0V, IOUT=0mA | 5 |
| Stand-by Current | ISTBY | | 0.01 | 0.1 | μA | VIN=6.0V, VCE=VSS | 5 |
| Line Regulation | ΔVOUT/(ΔVIN・VOUT) | | 0.01 | 0.1 | %/V | VOUT(T)+0.5V≦VIN≦6.0V, VOUT(T)≧1.0V, VCE=VIN, IOUT=30mA | 5 |
| Input Voltage | VIN | 1.7 | | 6 | V | | 5 |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTa・VOUT) | -100 | | 100 | ppm/℃ | VCE=VIN, IOUT=30mA, -40℃≦Ta≦85℃ | 5 |
| Power Supply Rejection Ratio | PSRR | | 65 | | dB | VOUT(T)≧4.8V, VIN=5.75VDC+0.5Vp-pAC, VCE=VIN, IOUT=30mA, f=1kHz | 5 |
| Limit Current | Ilim | 720 | 950 | | mA | VCE=VIN, VIN=VOUT(T)+1.0V, VOUT(T)>1.5V | 5 |
| Short Current | Ishort | | 55 | | mA | VCE=VIN, Short VOUT to VSS level | 5 |
| CE High Level Voltage | VCEH | 1.2 | | 6 | V | | 5 |
| CE Low Level Voltage | VCEL | | | 0.3 | V | | 5 |
| CE High Level Current | ICEH | 17.7 | 24 | 36.9 | μA | VCE=VIN=6.0V, XC6227C Series | 5 |
| CE Low Level Current | ICEL | -0.1 | | 0.1 | μA | VCE=VSS | 5 |
| Reverse Current | IREV | | 0.01 | 1.5 | μA | VIN=0V, VOUT=6.0V | 5 |
| VOUT Pin Sink Current | IREVS | | 2.8 | 5.3 | μA | VIN=5.0V, VOUT=6.0V | 5 |
| Thermal Shutdown Detect Temperature | TTSD | | 150 | | ℃ | Junction Temperature | 5 |
| Thermal Shutdown Release Temperature | TTSR | | 125 | | ℃ | Junction Temperature | 5 |
| Input Voltage (absolute maximum) | VIN | | | 6.5 | V | | 4 |
| Output Voltage (absolute maximum) | VOUT | | | 6.5 | V | | 4 |
| CE Input Voltage (absolute maximum) | VCE | | | 6.5 | V | | 4 |
| Power Dissipation SOT-25 | Pd | | | 250 | mW | SOT-25, IC only, Ta=25℃ | 4 |
| Power Dissipation SOT-25 (40mm x 40mm standard board) | Pd | | | 600 | mW | SOT-25, 40mm x 40mm standard board, Ta=25℃, reference only | 4 |
| Power Dissipation SOT-25 (JESD51-7 board) | Pd | | | 760 | mW | SOT-25, JESD51-7 board, Ta=25℃, reference only | 4 |
| Operating Ambient Temperature | Topr | -40 | | 85 | ℃ | | 4 |
| Storage Temperature | Tstg | -55 | | 125 | ℃ | | 4 |
## CAD (KiCad official)
- Symbol: `XC6227C501MR-G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files: `xc6227c501mr-g-etched.step` / `xc6227c501mr-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xc6227c501mr-g.step` / `xc6227c501mr-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Torex Semicon datasheet](docs/xc6227c501mr-g-datasheet.pdf) (23 pp, sha256 `03781c58b7e1bc8e`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xc6227c501mr-g-datasheet.pdf)