Generated by kicad-footprint-generator · KiCad file format 20260206
XC6223T331MR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25
XC6223T331MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input; the datasheet gives an input voltage range of 1.6V to 5.5V and an absolute maximum rating of VSS-0.3V to 7.0V. |
| 2 | VSS | power_in | Ground pin, the circuit ground reference for the regulator. |
| 3 | CE | input | ON/OFF control: a high level of 1.0V to 5.5V enables operation and a low level of 0V to 0.3V puts the IC in stand-by; for the T type an internal pull-down holds CE low when left open, and the absolute maximum CE input voltage is VSS-0.3V to 7.0V. |
| 4 | NC | unconnected | No connection pin, listed as NC in the SOT-25 pin assignment. |
| 5 | VOUT | power_out | Regulated output; for this part number (designator 331) the output is 3.3V and the maximum output current is 300mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | -0.3 | 7 | V | Min is VSS - 0.3 V, referenced to VSS | 5 | |
| Output Voltage | VOUT | -0.3 | V | Min is VSS - 0.3 V; max is VIN + 0.3 V (not numeric) | 5 | ||
| CE Input Voltage | VCE | -0.3 | 7 | V | Min is VSS - 0.3 V, referenced to VSS | 5 | |
| Power Dissipation (IC only) | Pd | 250 | mW | SOT-25, Ta=25℃, IC only | 5 | ||
| Power Dissipation (40mm x 40mm standard board) | Pd | 600 | mW | SOT-25, Ta=25℃, PCB mounted (reference only) | 5 | ||
| Power Dissipation (JESD51-7 board) | Pd | 760 | mW | SOT-25, Ta=25℃, PCB mounted (reference only) | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 105 | ℃ | J/K/M/N/P/Q/R/T type | 5 | |
| Storage Temperature | Tstg | -55 | 125 | ℃ | 5 | ||
| Output Voltage (3.30V nominal) | VOUT(E) | 3.267 | 3.3 | 3.333 | V | VOUT(T)≧2.0V, VCE=VIN, IOUT=10mA | 8 |
| Maximum Output Current | IOUTMAX | 300 | mA | VCE=VIN | 6 | ||
| Load Regulation | ΔVOUT | 25 | 45 | mV | VCE=VIN, 0.1mA≦IOUT≦300mA | 6 | |
| Dropout Voltage | Vdif | 200 | 305 | mV | VCE=VIN, IOUT=300mA | 8 | |
| Supply Current | ISS | 100 | 220 | μA | VCE=VIN | 6 | |
| Stand-by Current | ISTB | 0.01 | 0.4 | μA | VCE=VSS | 6 | |
| Line Regulation | ΔVOUT/(ΔVIN・VOUT) | 0.01 | 0.1 | %/V | VOUT(T)+0.5V≦VIN≦5.5V, VCE=VIN, IOUT=50mA | 6 | |
| Input Voltage | VIN | 1.6 | 5.5 | V | 6 | ||
| Output Voltage Temperature Characteristics (J/K/M/N/P/Q/R/T type) | ΔVOUT/(ΔTa・VOUT) | -100 | 100 | ppm / ℃ | VCE=VIN, IOUT=10mA, -40℃≦Ta≦105℃ | 6 | |
| Power Supply Rejection Ratio | PSRR | 80 | dB | VOUT(T)≧2.5V; VIN=(VOUT(T)+1.0)VDC+0.5Vp-pAC, VCE=VOUT(T)+1.0V, IOUT=30mA, f=1kHz | 6 | ||
| Current Limit | ILIM | 310 | 400 | mA | VCE=VIN | 6 | |
| Short Current | ISHORT | 50 | mA | VCE=VIN, VOUT=VSS | 6 | ||
| CE High Level Voltage | VCEH | 1 | 5.5 | V | 6 | ||
| CE Low Level Voltage | VCEL | 0.3 | V | 6 | |||
| CE High Level Current (C/D/G/H/M/N/R/T type) | ICEH | 3 | 5.5 | 9 | μA | VCE=VIN=5.5V | 6 |
| CE Low Level Current | ICEL | -0.1 | 0.1 | μA | VCE=VSS | 6 | |
| CL Discharge Resistance (B/D/F/H/K/N/Q/T type) | RDCHG | 300 | Ω | VIN=5.5V, VOUT=2.0V, VCE=VSS | 6 | ||
| Inrush Current (E/F/G/H/P/Q/R/T type) | Irush | 150 | mA | VIN=VCE=5.5V | 6 | ||
| Thermal Shutdown Detect Temperature | TTSD | 150 | ℃ | Junction temperature | 6 | ||
| Thermal Shutdown Release Temperature | TTSR | 120 | ℃ | Junction temperature | 6 | ||
| Thermal Shutdown Hysteresis Width | TTSD - TTSR | 30 | ℃ | Junction temperature | 6 |
CAD (KiCad official)
- Symbol:
XC6223T331MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6223t331mr-g-etched.step/xc6223t331mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6223t331mr-g.step/xc6223t331mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (30 pp, sha256
f89058bd4b3705b7, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).