main
Ray Publish 0.1.0 e89dc06

XC6222B121MR-G

Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25

XC6222B121MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input pin; operating input voltage range is 1.7V to 6.0V and the absolute maximum is -0.3V to +6.5V.
2 VSS power_in Ground pin, the reference for VIN, VOUT and CE; absolute voltage range on VOUT and CE is VSS-0.3V to +6.5V.
3 CE input ON/OFF control, active high: VCE of 1.2V to 6.0V enables the output and 0.3V or less disables it; the XC6222B type has no CE pull-down, and the datasheet notes the output becomes unstable if CE is left open.
4 NC unconnected No connection pin.
5 VOUT power_out Regulated output pin; for this 1.2V part VOUT(E) is 1.18V to 1.22V, output current is up to 700mA, and CL of 6.8μF minimum is required for outputs from 0.8V to 2.05V.

Key specifications

Parameter Value
Manufacturer Torex Semicon
Package SOT-25
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (nominal 1.20V row, Voltage Chart) VOUT(E) 1.18 1.22 V VOUT(T)=1.20V, Voltage Chart row 1.20 6
Output voltage accuracy offset (VOUT(T)≦2.0V) VOUT(E) -0.02 0.02 V VCE=VIN, IOUT=10mA; offset relative to VOUT(T) 4
Output current max IOUTMAX 700 mA VCE=VIN, VIN=2.5V; VOUT(T)<1.5V 4
Load regulation (1.20V row) ΔVOUT 30 60 mV VCE=VIN, 0.1mA≦IOUT≦300mA 6
Dropout voltage (1.20V row) Vdif 420 570 mV IOUT=300mA, VCE=VIN 6
Supply current ISS 100 220 μA VIN=VCE=VOUT(T)+1.0V, IOUT=0mA 4
Stand-by current ISTBY 0.01 0.1 μA VIN=6.0V, VCE=VSS 4
Line regulation ΔVOUT/(ΔVIN·VOUT) 0.01 0.1 %/V VOUT(T)+0.5V≦VIN≦6.0V, VOUT(T)≧1.0V; VCE=VIN, IOUT=30mA 4
Input voltage VIN 1.7 6 V 4
Output voltage temperature characteristics ΔVOUT/(ΔTa·VOUT) -100 100 ppm/℃ VCE=VIN, IOUT=30mA, -40℃≦Ta≦85℃ 4
Limit current ILIM 720 950 mA VCE=VIN, VIN=2.5V; VOUT(T)<1.5V 4
CE high level voltage VCEH 1.2 6 V 4
CE low level voltage VCEL 0.3 V 4
CE high level current (XC6222A/B series) ICEH -0.1 0.1 μA VCE=VIN=6.0V, XC6222A/B series 4
CE low level current ICEL -0.1 0.1 μA VCE=VSS 4
Reverse current IREV 0.01 1.5 μA VIN=0V, VOUT=VOUT(T), VCE=VIN or VSS 4
VOUT pin sink current IREVS 95 215 μA VIN=VCE=5.0V, VOUT=6.0V 4
CL discharge resistance (XC6222B/D series) RDCHG 370 530 690 Ω VIN=6.0V, VOUT=4.0V, VCE=VSS 4
Absolute max input voltage VIN -0.3 6.5 V Ta=25℃ 3
Absolute max output current IOUT 1400 mA Use within Pd > (VIN-VOUT)×IOUT (*1) 3
Absolute max output voltage VOUT -0.3 6.5 V Printed as VSS-0.3 to +6.5 3
Absolute max CE input voltage VCE -0.3 6.5 V Printed as VSS-0.3 to +6.5 3
Power dissipation SOT-25 (mount not labelled) Pd 250 mW SOT-25; mounting condition not labelled in table 3
Power dissipation SOT-25 (PCB mounted) Pd 600 mW SOT-25, PCB mounted (*2) 3
Operating temperature range Topr -40 85 ℃ 3
Storage temperature range Tstg -55 125 ℃ 3
Maximum junction temperature (power dissipation basis) Tj 125 ℃ Board mount, Tj max basis of SOT-25 power dissipation data 23
Thermal resistance SOT-25 θJA 166.67 ℃/W SOT-25 board mount, natural convection 23
Output capacitor CL (VOUT 0.8V~2.05V range) CL 6.8 μF Ceramic; applies to VOUT 0.8V~2.05V range including 1.2V 8
Input capacitor CIN CIN 1 μF Between VIN and VSS 8
Ripple rejection rate PSRR 65 dB VCE=VIN, IOUT=30mA, f=1kHz 4
Short current ISHORT 55 mA VCE=VIN, VOUT shorted to VSS 4
Thermal shutdown detect temperature TTSD 150 ℃ Junction temperature 4
Thermal shutdown release temperature TTSR 125 ℃ Junction temperature 4

CAD (KiCad official)

  • Symbol: XC6222B121MR-G
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25 (KiCad packages3D, STEP)
  • 3D model files: xc6222b121mr-g-etched.step / xc6222b121mr-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xc6222b121mr-g.step / xc6222b121mr-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Torex Semicon datasheet (26 pp, sha256 b68f7bf3c3f2daf9, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF