component
XC6220B501PR-G
Public Made by Adomby adom
Torex Semicon Linear Voltage Regulators (LDO), SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6220B501PR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-89-5
XC6220B501PR-G from Torex Semicon, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | ON/OFF control: VCE ≤ 0.4V turns the IC off, 1.2V ≤ VCE ≤ 6.0V turns it on; avoid leaving it open (undefined state for XC6220B, so connect it to a defined voltage). |
| 2 | VSS | power_in | Ground pin. |
| 3 | NC | unconnected | No connection. |
| 4 | VIN | power_in | Power input with an operating range of 1.6V to 6.0V (absolute maximum 6.5V); place the input capacitor CIN close to this pin. |
| 5 | VOUT | power_out | Regulated output delivering up to 1000mA, with an output capacitor CL placed close to this pin and VSS for phase compensation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-89-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (HS mode) | VOUT(E) | 4.95 | 5.05 | V | VOUT(T)=5.00V, VCE=VIN, IOUT=30mA, Ta=25℃ | 8 | |
| Output Voltage (PS mode) | VOUT(E) | 4.9 | 5.1 | V | VOUT(T)=5.00V, VCE=VIN, IOUT=0.1mA, Ta=25℃ | 8 | |
| Output Current | IOUTMAX | 1000 | 1200 | mA | VCE=VIN, VIN=VOUT(T)+1.0V, 1.2V≦VOUT(T)≦5.0V | 5 | |
| Load Regulation | ΔVOUT | 10 | 45 | mV | High Speed Mode (HS), VCE=VIN, 10mA≦IOUT≦300mA | 5 | |
| Dropout Voltage1 | Vdif | 53 | 85 | mV | IOUT=300mA, VCE=VIN | 8 | |
| Supply Current 1 | ISS1 | 50 | 108 | μA | High Speed Mode(HS), VIN=VCE=VOUT(T)+1.0V, IOUT=10mA (A/B Series) | 5 | |
| Supply Current 2 | ISS2 | 8 | 18 | μA | Power Save Mode(PS), VIN=VCE=VOUT(T)+1.0V, IOUT=0.1mA (A/B Series) | 5 | |
| Stand-by Current | ISTBY | -0.1 | 0.01 | 0.1 | μA | VIN=6.0V, VCE=VSS | 5 |
| Line Regulation | ΔVOUT/(ΔVIN・VOUT) | 0.01 | 0.2 | %/V | VOUT(T)+0.5V≦VIN≦6.0V, 1.1V≦VOUT(T)≦5.0V, VCE=VIN, IOUT=100mA | 5 | |
| Input Voltage | VIN | 1.6 | 6 | V | 5 | ||
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTa・VOUT) | 100 | ppm/℃ | VCE=VIN, IOUT=30mA, -40℃≦Ta≦85℃ (printed ±100) | 5 | ||
| Ripple Rejection Ratio | PSRR | 50 | dB | VIN=5.75VDC+0.5Vp-pAC, 4.75V≦VOUT(T)≦5.0V, VCE=VIN, IOUT=30mA, f=1kHz | 6 | ||
| Limit Current | ILIM | 1005 | 1200 | mA | VCE=VIN=VOUT(T)+1.0V, 1.2V≦VOUT(T)≦5.0V | 6 | |
| Short Current | ISHORT | 180 | mA | VCE=VIN, Short VOUT to VSS level | 6 | ||
| PS Switching Current | IGOR | 1 | 2 | mA | 1.45V≦VOUT(T)≦5.0V, VIN=VOUT(T)+1.0V, VCE=VIN, IOUT=heavy to light load | 6 | |
| HS Switching Current | IGO | 5 | 10 | mA | 1.45V≦VOUT(T)≦5.0V, VIN=VOUT(T)+1.0V, VCE=VIN, IOUT=light to heavy load | 6 | |
| Switch Current Hysteresis Range | IGOhys | 3 | mA | IGOhys=IGO-IGOR | 6 | ||
| PS Switching Delay Time | tDPS | 1450 | μs | VIN=VOUT(T)+1.0V, VCE=VIN, HS to PS mode by IGOR | 8 | ||
| CE High Level Voltage | VCEH | 1.2 | 6 | V | 6 | ||
| CE Low Level Voltage | VCEL | 0.4 | V | min printed as VSS | 6 | ||
| CE High Level Current | ICEH | -0.1 | 0.1 | μA | VCE=VIN=6.0V(A/B series) | 6 | |
| CE Low Level Current | ICEL | -0.1 | 0.1 | μA | VCE=VSS | 6 | |
| Inrush Current | IRUSH | 700 | mA | VIN=VOUT(T)+1.0V, CL=22μF, VCE=0V→VOUT(T)+1.0V (only when rising and within 1ms) | 6 | ||
| CL Discharge Resistance | RDCHG | 460 | Ω | VIN=6.0V, VOUT=5.0V, VCE=VSS | 6 | ||
| Thermal Shutdown Detect Temperature | TTSD | 150 | ℃ | Junction Temperature | 6 | ||
| Thermal Shutdown Release Temperature | TTSR | 135 | ℃ | Junction Temperature | 6 | ||
| Input Voltage (absolute maximum) | VIN | -0.3 | 6.5 | V | printed VSS - 0.3 ~ 6.5 | 4 | |
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | printed VSS - 0.3 ~ VIN + 0.3 | 4 | ||
| CE Input Voltage (absolute maximum) | VCE | -0.3 | 6.5 | V | printed VSS - 0.3 ~ 6.5 | 4 | |
| Power Dissipation SOT-89-5 (IC only) | Pd | 500 | mW | Ta=25℃, IC only | 4 | ||
| Power Dissipation SOT-89-5 (40mm x 40mm Standard Board) | Pd | 1300 | mW | Ta=25℃, 40mm x 40mm Standard Board | 4 | ||
| Power Dissipation SOT-89-5 (JESD51-7 Board) | Pd | 1750 | mW | Ta=25℃, JESD51-7 Board | 4 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 4 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 4 |
CAD (KiCad official)
- Symbol:
XC6220B501PR-G - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
xc6220b501pr-g-etched.step/xc6220b501pr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6220b501pr-g.step/xc6220b501pr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (26 pp, sha256
e6a8fbbb28750515, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).