Generated by kicad-footprint-generator · KiCad file format 20260206
XC6210B502MR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25
XC6210B502MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input with an operating voltage range of 1.50V to 6.00V and an absolute maximum input voltage of 6.5V. |
| 2 | VSS | power_in | Ground pin, which should be wired with low impedance because high wiring impedance can make operation unstable. |
| 3 | CE | input | ON/OFF control pin where H is active and L is stand-by; the B type has no pull-down, so the CE pin must not be left open and should be driven to VIN or VSS. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output with output voltage selectable from 0.80V to 5.00V in 0.05V steps, requiring an output capacitor CL of at least 1.0µF for 1.80V to 5.00V outputs. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Output Current | IOUTMAX | 700 | mA | VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS) (VOUT(T)>1.50V) | 6 | ||
| Current Limiter | ILIM | 700 | 800 | mA | VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS) VOUT(T)>1.50V | 6 | |
| Load Regulation | ΔVOUT | 15 | 60 | mV | 1mA<IOUT<100mA, VCE=ON(VIN or VSS) | 6 | |
| Input Voltage | VIN | 1.5 | 6 | V | 6 | ||
| CE H Level Voltage | VCEH | 1.3 | 6 | V | 6 | ||
| CE L Level Voltage | VCEL | 0.25 | V | 6 | |||
| Supply Current (B type) | IDD | 35 | 55 | µA | VIN=VCE=VOUT(T)+1.0V | 6 | |
| Supply Current (5.00V voltage chart) | IDD | 42 | 72 | µA | VIN=VCE=VOUT(T)+1.0V, Ta=25℃ | 8 | |
| Stand-by Current | ISTBY | -0.1 | 0.1 | µA | VIN=6.0V,VCE=OFF(VIN or VSS) | 6 | |
| CE H Level Current (Type B/C/D) | ICEH | 0.1 | 0.1 | µA | VCE=VIN=VOUT(T)+1.0V (Type B/C/D) | 6 | |
| CE L Level Current (Type A/B/D) | ICEL | 0.1 | µA | VIN=VOUT(T)+1.0V, VCE=VSS(Type A/B/D) | 6 | ||
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr·ΔVOUT) | -100 | 100 | ppm/℃ | IOUT=30mA, VCE=ON (VIN or VSS), -40℃≦Topr≦85℃ | 6 | |
| Output Capacitor (CL) for 1.80V to 5.00V | CL | 1 | µF | 1.80V~5.00V output voltage range | 10 | ||
| Input Voltage (absolute maximum) | VIN | 6.5 | V | 5 | |||
| Output Current (absolute maximum) | IOUT | 900 | mA | 5 | |||
| CE Pin Voltage | VCE | 6.5 | V | 5 | |||
| Power Dissipation SOT-25 | Pd | 250 | mW | Ta=25℃ | 5 | ||
| Power Dissipation SOT-25 (40mm x 40mm standard board) | Pd | 600 | mW | 40mm x 40mm standard board (*2) | 5 | ||
| Power Dissipation SOT-25 (JESD51-7 board) | Pd | 760 | mW | JESD51-7 board (*2) | 5 | ||
| Operating Temperature Range | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature Range | Tstg | -55 | 125 | ℃ | 5 | ||
| Ripple Rejection Rate | PSRR | 60 | dB | VIN=5.75VDC+0.5VP-PAC, VCE=ON(VIN or VSS), IOUT=30mA, f=1kHz (VOUT(T)≧4.75V) | 6 | ||
| Short-Circuit Current | ISHORT | 50 | mA | VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS) | 6 |
CAD (KiCad official)
- Symbol:
XC6210B502MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6210b502mr-g-etched.step/xc6210b502mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6210b502mr-g.step/xc6210b502mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (24 pp, sha256
41bebb0a51c12aa0, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).