component
XC6210B322PR-G
Public Made by Adomby adom
Torex Semicon Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6210B322PR-G
Torex Semicon · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-5
XC6210B322PR-G from Torex Semicon, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | ON/OFF control; for the B type (XC6210B) it is active high (H=active, L=stand-by, VCEH min 1.3V, VCEL max 0.25V) with no pull-down resistor, so it must not be left open (undefined state). |
| 2 | VSS | power_in | Ground. |
| 3 | NC | unconnected | No connection. |
| 4 | VIN | power_in | Power input, operating voltage range 1.5V to 6.0V (absolute maximum 6.5V). |
| 5 | VOUT | power_out | Regulated output; 700mA minimum output current for VOUT>1.50V, needs an output capacitor of at least 1.0µF for 1.80V to 5.00V outputs placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-89-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT(E) | 3.136 | 3.264 | V | VIN=VOUT(T)+1.0V, IOUT=30mA, VCE=ON; VOUT(T)=3.20V | 8 | |
| Maximum Output Current | IOUTMAX | 700 | mA | VIN=VOUT(T)+1.0V, VCE=ON (VOUT(T)>1.50V) | 6 | ||
| Load Regulation | ΔVOUT | 15 | 60 | mV | 1mA<IOUT<100mA, VCE=ON | 6 | |
| Dropout Voltage 1 | Vdif1 | 15 | 23 | mV | IOUT=30mA, VCE=ON | 8 | |
| Dropout Voltage 2 | Vdif2 | 50 | 75 | mV | IOUT=100mA, VCE=ON | 8 | |
| Supply Current (B type) | IDD | 35 | 55 | μA | VIN=VCE=VOUT(T)+1.0V | 6 | |
| Stand-by Current | ISTBY | -0.1 | 0.1 | μA | VIN=6.0V, VCE=OFF (VIN or VSS) | 6 | |
| Line Regulation | ΔVOUT/(ΔVIN·VOUT) | 0.01 | 0.2 | %/V | VOUT(T)+1.0V≦VIN≦6.0V, VCE=ON, IOUT=30mA, VOUT(T)<4.50V | 6 | |
| Input Voltage | VIN | 1.5 | 6 | V | 6 | ||
| Current Limiter | ILIM | 700 | 800 | mA | VIN=VOUT(T)+1.0V, VCE=ON, VOUT(T)>1.50V | 6 | |
| CE High Level Voltage | VCEH | 1.3 | 6 | V | 6 | ||
| CE Low Level Voltage | VCEL | 0.25 | V | 6 | |||
| CE High Level Current (Type B) | ICEH | -0.1 | 0.1 | μA | VCE=VIN=VOUT(T)+1.0V (Type B/C/D) | 6 | |
| CE Low Level Current (Type B) | ICEL | -0.1 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS (Type A/B/D) | 6 | |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr·VOUT) | 100 | ppm/℃ | IOUT=30mA, VCE=ON, -40℃≦Topr≦85℃ (printed ±100) | 6 | ||
| Ripple Rejection Rate | PSRR | 60 | dB | VIN=[VOUT(T)+1.0]VDC+0.5VP-PAC, VCE=ON, IOUT=30mA, f=1kHz, VOUT(T)<4.75V | 6 | ||
| Short-Circuit Current | ISHORT | 50 | mA | VIN=VOUT(T)+1.0V, VCE=ON | 6 | ||
| Input Voltage (absolute maximum) | VIN | 6.5 | V | 5 | |||
| Output Current (absolute maximum) | IOUT | 900 | mA | IOUT=Pd/(VIN-VOUT) | 5 | ||
| CE Pin Voltage (absolute maximum) | VCE | -0.3 | 6.5 | V | VSS - 0.3 ~ 6.5 | 5 | |
| Power Dissipation SOT-89-5 | Pd | 500 | mW | Ta=25℃, SOT-89-5 | 5 | ||
| Power Dissipation SOT-89-5, 40mm x 40mm standard board | Pd | 1300 | mW | Ta=25℃, SOT-89-5, 40mm x 40mm standard board | 5 | ||
| Power Dissipation SOT-89-5, JESD51-7 board | Pd | 1750 | mW | Ta=25℃, SOT-89-5, JESD51-7 board | 5 | ||
| Operating Temperature Range | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature Range | Tstg | -55 | 125 | ℃ | 5 | ||
| Output Capacitor (minimum) | CL | 1 | μF | VOUT 1.80V~5.00V, more than 1.0μF | 9 |
CAD (KiCad official)
- Symbol:
XC6210B322PR-G - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
xc6210b322pr-g-etched.step/xc6210b322pr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6210b322pr-g.step/xc6210b322pr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (24 pp, sha256
41bebb0a51c12aa0, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).