component
XC6209F502PR-G
Public Made by Adomby adom
Torex Semicon Linear Voltage Regulators (LDO), SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6209F502PR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-89-5
XC6209F502PR-G from Torex Semicon, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection pin on the SOT-89-5 package. |
| 2 | VSS | power_in | Ground pin; the output capacitor CL (at least 1µF) should be connected as close as possible between VOUT and VSS. |
| 3 | CE | input | ON/OFF control input; for Type F (active high, no pull-down resistor) a high level of 1.6V to VIN turns the output ON and a low level of 0.25V max turns it OFF, and it should be driven to VIN or VSS rather than left open. |
| 4 | VIN | power_in | Power input with an operating range of 2V to 10V (absolute maximum 12.0V), requiring a 1µF input capacitor CIN between VIN and VSS. |
| 5 | VOUT | power_out | Regulated output (0.9V to 6.0V), requiring an output capacitor of at least 1µF; Type F supplies 300mA max depending on set output voltage with foldback short protection of about 50mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-89-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (2%) | VOUT(E) | 4.9 | 5 | 5.1 | V | IOUT=30mA, VOUT(T)=5.00V | 10 |
| Maximum Output Current | IOUTMAX | 300 | mA | VIN=VOUT(T)+1.0V | 12 | ||
| Load Regulation | ΔVOUT | 15 | 50 | mV | 1mA<IOUT<100mA | 8 | |
| Load Regulation 2 | ΔVOUT2 | 100 | mV | 1mA<IOUT<300mA | 8 | ||
| Dropout Voltage 1 | Vdif1 | 50 | 70 | mV | IOUT=30mA | 11 | |
| Dropout Voltage 2 | Vdif2 | 160 | 210 | mV | IOUT=100mA | 11 | |
| Supply Current (Type F) | IDD | 25 | 50 | μA | VCE=VIN=VOUT(T)+1.0V | 8 | |
| Stand-by Current | ISTB | 0.01 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 | |
| Line Regulation | ΔVOUT/(ΔVIN·VOUT) | 0.01 | 0.2 | %/V | VOUT(T)+1.0V≦VIN≦10V, IOUT=30mA | 8 | |
| Input Voltage | VIN | 2 | 10 | V | 8 | ||
| CE High Level Voltage | VCEH | 1.6 | V | max printed as VIN | 8 | ||
| CE Low Level Voltage | VCEL | 0.25 | V | 8 | |||
| CE High Level Current (Type F) | ICEH | -0.1 | 0.1 | μA | VIN=VCE=VOUT(T)+1.0V | 8 | |
| CE Low Level Current | ICEL | -0.1 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 | |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr·VOUT) | 100 | ppm/℃ | IOUT=30mA, -40℃<Topr<85℃ | 8 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | VIN=[VOUT(T)+1.0]V+1.0Vp-pAC, IOUT=50mA, f=10kHz | 8 | ||
| Current Limit | Ilim | 380 | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 | ||
| Short Current | ISHORT | 50 | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 | ||
| Input Voltage (absolute maximum) | VIN | 12 | V | Ta=25℃ | 5 | ||
| Output Current (absolute maximum) | IOUT | 500 | mA | IOUT≦Pd/(VIN-VOUT) | 5 | ||
| Power Dissipation SOT-89-5 | Pd | 500 | mW | Ta=25℃ | 5 | ||
| Power Dissipation SOT-89-5 (PCB mounted) | Pd | 1300 | mW | PCB mounted, Ta=25℃ | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 5 | ||
| Thermal Resistance SOT-89-5 | 76.92 | ℃/W | Board mount 40x40mm, FR-4, Tjmax=125℃ | 26 |
CAD (KiCad official)
- Symbol:
XC6209F502PR-G - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
xc6209f502pr-g-etched.step/xc6209f502pr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6209f502pr-g.step/xc6209f502pr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (30 pp, sha256
c8d4c88259ea584e, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).