component
XC6209F332PR-G
Public Made by Adomby adom
Torex Semicon Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC6209F332PR-G
Torex Semicon · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-5
XC6209F332PR-G from Torex Semicon, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; the datasheet lists this SOT-89-5 pin as NC and it is not used for any signal. |
| 2 | VSS | power_in | Ground pin; the datasheet states that all voltages are referenced to VSS. |
| 3 | CE | input | ON/OFF control input; for the type F variant (XC6209F332PR-G) the output is enabled when CE is High (VCEH min 1.6 V) and disabled when CE is Low (VCEL max 0.25 V). |
| 4 | VIN | power_in | Input supply pin with an operating input voltage range of 2 V to 10 V (absolute maximum 12.0 V), and a 1 µF input capacitor is recommended between VIN and VSS. |
| 5 | VOUT | power_out | Regulated output pin; for type F the maximum output current is 300 mA, and an output capacitor of at least 1 µF should be placed as close as possible to VOUT and VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-89-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (2%) VOUT(E) at 3.30V nominal | VOUT(E) | 3.234 | 3.3 | 3.366 | V | IOUT=30mA | 10 |
| Load Regulation | ΔVOUT | 15 | 50 | mV | 1mA≦IOUT≦100mA | 8 | |
| Load Regulation 2 | ΔVOUT2 | 100 | mV | 1mA<IOUT<300mA | 8 | ||
| Dropout Voltage 1 | Vdif1 | 90 | mV | IOUT=30mA | 10 | ||
| Dropout Voltage 2 | Vdif2 | 250 | mV | IOUT=100mA | 10 | ||
| Supply Current (Type F) | IDD | 25 | 50 | μA | VCE=VIN=VOUT(T)+1.0V; When VOUT≦0.95V, VCE=VIN=2.0V | 8 | |
| Stand-by Current | ISTB | 0.01 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS; When VOUT≦0.95V, VCE=VIN=2.0V | 8 | |
| Line Regulation | ΔVOUT/(ΔVIN･VOUT) | 0.01 | 0.2 | %/V | VOUT(T)+1.0V≦VIN≦10V, IOUT=30mA | 8 | |
| Input Voltage | VIN | 2 | 10 | V | 8 | ||
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr･VOUT) | 100 | ppm/℃ | IOUT=30mA, -40℃<Topr<85℃ | 8 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | IOUT=50mA, f=10kHz | 8 | ||
| Current Limit | Ilim | 380 | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 | ||
| Short Current | ISHORT | 50 | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 | ||
| CE H Level Voltage | VCEH | 1.6 | V | 8 | |||
| CE L Level Voltage | VCEL | 0.25 | V | 8 | |||
| CE H Level Current (Type F) | ICEH | -0.1 | 0.1 | μA | VIN=VCE=VOUT(T)+1.0V; When VOUT≦0.95V, VIN=VCE=2.0V | 8 | |
| CE L Level Current | ICEL | -0.1 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS; When VOUT≦0.95V, VIN=2.0V | 8 | |
| Input Voltage (absolute maximum) | VIN | 12 | V | 5 | |||
| Output Current | IOUT | 500 | mA | IOUT≦Pd/(VIN-VOUT) | 5 | ||
| Power Dissipation (SOT-89-5) | Pd | 500 | mW | SOT-89-5 | 5 | ||
| Power Dissipation (SOT-89-5, PCB mounted) | Pd | 1300 | mW | SOT-89-5, PCB mounted (reference test board) | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 5 | ||
| Thermal Resistance (SOT-89-5) | θJA | 76.92 | ℃/W | Board mount, 40x40mm FR-4 board, Tjmax=125℃ | 26 |
CAD (KiCad official)
- Symbol:
XC6209F332PR-G - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
xc6209f332pr-g-etched.step/xc6209f332pr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6209f332pr-g.step/xc6209f332pr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (30 pp, sha256
c8d4c88259ea584e, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).