component
XC6209F302MR-G
Public Made by Adomby adom
Torex Semicon Linear Voltage Regulators (LDO), SOT-25-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XC6209F302MR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25-5
XC6209F302MR-G from Torex Semicon, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input, operating input voltage range is 2V to 10V (absolute maximum 12.0V), with a 1μF input capacitor recommended between VIN and VSS. |
| 2 | VSS | power_in | Ground pin; the output capacitor of at least 1μF should be connected as close as possible between VOUT and VSS. |
| 3 | CE | input | ON/OFF control input; for Type F (active high, no pull-down) H level (1.6V to VIN) turns the output ON and L level (max 0.25V) turns it OFF, and it should not be left open. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output (3.0V nominal for the 302 version, ±2%), with an output capacitor of at least 1μF required and Type F supplying up to 300mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (2%) | VOUT(E) | 2.94 | 3 | 3.06 | V | IOUT=30mA | 10 |
| Maximum Output Current | IOUTMAX | 300 | mA | VIN=VOUT(T)+1.0V | 12 | ||
| Load Regulation | ΔVOUT | 15 | 50 | mV | 1mA<IOUT<100mA | 8 | |
| Load Regulation 2 | ΔVOUT2 | 100 | mV | 1mA<IOUT<300mA | 8 | ||
| Dropout Voltage 1 | Vdif1 | 60 | 90 | mV | IOUT=30mA | 10 | |
| Dropout Voltage 2 | Vdif2 | 200 | 250 | mV | IOUT=100mA | 10 | |
| Supply Current (Type F) | IDD | 25 | 50 | μA | VCE=VIN=VOUT(T)+1.0V | 8 | |
| Stand-by Current | ISTB | 0.01 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 | |
| Line Regulation | ΔVOUT/(ΔVIN·VOUT) | 0.01 | 0.2 | %/V | VOUT(T)+1.0V≦VIN≦10V, IOUT=30mA | 8 | |
| Input Voltage | VIN | 2 | 10 | V | 8 | ||
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr·VOUT) | 100 | ppm/℃ | IOUT=30mA, -40℃<Topr<85℃ | 8 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | IOUT=50mA, f=10kHz | 8 | ||
| Current Limit | Ilim | 380 | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 | ||
| Short Current | ISHORT | 50 | mA | VIN= VOUT(T)+1.0V, VCE=VIN | 8 | ||
| CE H Level Voltage | VCEH | 1.6 | V | max VIN | 8 | ||
| CE L Level Voltage | VCEL | 0.25 | V | 8 | |||
| CE H Level Current (Type F) | ICEH | -0.1 | 0.1 | μA | VIN=VCE=VOUT(T)+1.0V | 8 | |
| CE L Level Current | ICEL | -0.1 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 | |
| Input Voltage (abs max) | VIN | 12 | V | Ta=25℃ | 5 | ||
| Output Current (abs max) | IOUT | 500 | mA | IOUT≦Pd/(VIN-VOUT) | 5 | ||
| Output Voltage (abs max) | VOUT | -0.3 | 0.3 | V | VSS - 0.3 ~ VIN + 0.3 V (max relative to VIN) | 5 | |
| CE Input Voltage (abs max) | VCE | -0.3 | 0.3 | V | VSS - 0.3 ~ VIN + 0.3 V (max relative to VIN) | 5 | |
| Power Dissipation SOT-25 | Pd | 250 | mW | SOT-25; 600 mW PCB mounted | 5 | ||
| Power Dissipation SOT-25 PCB mounted | Pd | 600 | mW | SOT-25, PCB mounted | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 5 | ||
| Thermal Resistance SOT-25 | 166.67 | ℃/W | Board mount 40x40mm, Ta=25℃ | 25 |
CAD (KiCad official)
- Symbol:
XC6209F302MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25-5 (KiCad packages3D, STEP)
- 3D model files:
xc6209f302mr-g-etched.step/xc6209f302mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6209f302mr-g.step/xc6209f302mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (30 pp, sha256
c8d4c88259ea584e, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XC6209F302MR-G
**Torex Semicon** · Linear Voltage Regulators (LDO) · SOT-25-5
XC6209F302MR-G from Torex Semicon, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input, operating input voltage range is 2V to 10V (absolute maximum 12.0V), with a 1μF input capacitor recommended between VIN and VSS. |
| 2 | VSS | power_in | Ground pin; the output capacitor of at least 1μF should be connected as close as possible between VOUT and VSS. |
| 3 | CE | input | ON/OFF control input; for Type F (active high, no pull-down) H level (1.6V to VIN) turns the output ON and L level (max 0.25V) turns it OFF, and it should not be left open. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output (3.0V nominal for the 302 version, ±2%), with an output capacitor of at least 1μF required and Type F supplying up to 300mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (2%) | VOUT(E) | 2.94 | 3 | 3.06 | V | IOUT=30mA | 10 |
| Maximum Output Current | IOUTMAX | 300 | | | mA | VIN=VOUT(T)+1.0V | 12 |
| Load Regulation | ΔVOUT | | 15 | 50 | mV | 1mA<IOUT<100mA | 8 |
| Load Regulation 2 | ΔVOUT2 | | | 100 | mV | 1mA<IOUT<300mA | 8 |
| Dropout Voltage 1 | Vdif1 | | 60 | 90 | mV | IOUT=30mA | 10 |
| Dropout Voltage 2 | Vdif2 | | 200 | 250 | mV | IOUT=100mA | 10 |
| Supply Current (Type F) | IDD | | 25 | 50 | μA | VCE=VIN=VOUT(T)+1.0V | 8 |
| Stand-by Current | ISTB | | 0.01 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 |
| Line Regulation | ΔVOUT/(ΔVIN·VOUT) | | 0.01 | 0.2 | %/V | VOUT(T)+1.0V≦VIN≦10V, IOUT=30mA | 8 |
| Input Voltage | VIN | 2 | | 10 | V | | 8 |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr·VOUT) | | 100 | | ppm/℃ | IOUT=30mA, -40℃<Topr<85℃ | 8 |
| Power Supply Rejection Ratio | PSRR | | 70 | | dB | IOUT=50mA, f=10kHz | 8 |
| Current Limit | Ilim | | 380 | | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 |
| Short Current | ISHORT | | 50 | | mA | VIN= VOUT(T)+1.0V, VCE=VIN | 8 |
| CE H Level Voltage | VCEH | 1.6 | | | V | max VIN | 8 |
| CE L Level Voltage | VCEL | | | 0.25 | V | | 8 |
| CE H Level Current (Type F) | ICEH | -0.1 | | 0.1 | μA | VIN=VCE=VOUT(T)+1.0V | 8 |
| CE L Level Current | ICEL | -0.1 | | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 |
| Input Voltage (abs max) | VIN | | | 12 | V | Ta=25℃ | 5 |
| Output Current (abs max) | IOUT | | | 500 | mA | IOUT≦Pd/(VIN-VOUT) | 5 |
| Output Voltage (abs max) | VOUT | -0.3 | | 0.3 | V | VSS - 0.3 ~ VIN + 0.3 V (max relative to VIN) | 5 |
| CE Input Voltage (abs max) | VCE | -0.3 | | 0.3 | V | VSS - 0.3 ~ VIN + 0.3 V (max relative to VIN) | 5 |
| Power Dissipation SOT-25 | Pd | | | 250 | mW | SOT-25; 600 mW PCB mounted | 5 |
| Power Dissipation SOT-25 PCB mounted | Pd | | | 600 | mW | SOT-25, PCB mounted | 5 |
| Operating Ambient Temperature | Topr | -40 | | 85 | ℃ | | 5 |
| Storage Temperature | Tstg | -55 | | 125 | ℃ | | 5 |
| Thermal Resistance SOT-25 | | | 166.67 | | ℃/W | Board mount 40x40mm, Ta=25℃ | 25 |
## CAD (KiCad official)
- Symbol: `XC6209F302MR-G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25-5 (KiCad packages3D, STEP)
- 3D model files: `xc6209f302mr-g-etched.step` / `xc6209f302mr-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xc6209f302mr-g.step` / `xc6209f302mr-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Torex Semicon datasheet](docs/xc6209f302mr-g-datasheet.pdf) (30 pp, sha256 `c8d4c88259ea584e`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xc6209f302mr-g-datasheet.pdf)