main
Ray
Publish 0.1.0
e4eae8e
XC6209F252MR-G
Torex Semicon · Linear Voltage Regulators (LDO) · SOT-25
XC6209F252MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input; operating input voltage range is 2V to 10V (absolute maximum 12.0V), with a 0.1µF input capacitor recommended between VIN and VSS. |
| 2 | VSS | power_in | Ground pin; all voltages are referenced to VSS and the output capacitor should be connected close to VOUT and VSS. |
| 3 | CE | input | ON/OFF control input; for Type F (active high, no pull-down resistor) the high level is 1.6V to VIN turning the output on and the low level is max 0.25V turning it off. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output; Type F delivers a maximum output current of 300mA (depends on set voltage), needs an output capacitor of at least 1µF, and is current-limited with foldback (about 50mA short-circuit current). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (2%) | VOUT(E) | 2.45 | 2.55 | V | IOUT=30mA, VOUT(T)=2.50V | 10 | |
| Maximum Output Current | IOUTMAX | 300 | mA | VIN=VOUT(T)+1.0V (E-3) | 12 | ||
| Load Regulation | ΔVOUT | 15 | 50 | mV | 1mA<IOUT<100mA | 8 | |
| Load Regulation 2 | ΔVOUT2 | 100 | mV | 1mA<IOUT<300mA | 8 | ||
| Dropout Voltage 1 | Vdif1 | 70 | 100 | mV | IOUT=30mA | 10 | |
| Dropout Voltage 2 | Vdif2 | 220 | mV | IOUT=100mA | 10 | ||
| Supply Current (Type F) | IDD | 25 | 50 | μA | VCE=VIN=VOUT(T)+1.0V | 8 | |
| Stand-by Current | ISTB | 0.01 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 | |
| Line Regulation | ΔVOUT/(ΔVIN・VOUT) | 0.01 | 0.2 | %/V | VOUT(T)+1.0V≦VIN≦10V, IOUT=30mA | 8 | |
| Input Voltage | VIN | 2 | 10 | V | 8 | ||
| CE High Level Voltage | VCEH | 1.6 | V | max printed as VIN | 8 | ||
| CE Low Level Voltage | VCEL | 0.25 | V | 8 | |||
| CE High Level Current (Type F) | ICEH | -0.1 | 0.1 | μA | VIN=VCE=VOUT(T)+1.0V | 8 | |
| CE Low Level Current | ICEL | -0.1 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 | |
| Input Voltage (absolute maximum) | VIN | 12 | V | Ta=25℃ | 5 | ||
| Output Current (absolute maximum) | IOUT | 500 | mA | IOUT≦Pd/(VIN-VOUT) | 5 | ||
| Power Dissipation SOT-25 | Pd | 250 | mW | SOT-25, Ta=25℃ | 5 | ||
| Power Dissipation SOT-25 (PCB mounted) | Pd | 600 | mW | SOT-25 PCB mounted, reference data | 5 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | 5 | ||
| Storage Temperature | Tstg | -55 | 125 | ℃ | 5 | ||
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr・VOUT) | 100 | ppm/℃ | IOUT=30mA, -40℃<Topr<85℃ | 8 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | IOUT=50mA, f=10kHz | 8 | ||
| Current Limit | Ilim | 380 | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 | ||
| Short Current | ISHORT | 50 | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 | ||
| Thermal Resistance SOT-25 | 166.67 | ℃/W | SOT-25 on 40×40mm board | 25 |
CAD (KiCad official)
- Symbol:
XC6209F252MR-G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
xc6209f252mr-g-etched.step/xc6209f252mr-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6209f252mr-g.step/xc6209f252mr-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (31 pp, sha256
575dcb9916c5c35f, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XC6209F252MR-G
**Torex Semicon** · Linear Voltage Regulators (LDO) · SOT-25
XC6209F252MR-G from Torex Semicon, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input; operating input voltage range is 2V to 10V (absolute maximum 12.0V), with a 0.1µF input capacitor recommended between VIN and VSS. |
| 2 | VSS | power_in | Ground pin; all voltages are referenced to VSS and the output capacitor should be connected close to VOUT and VSS. |
| 3 | CE | input | ON/OFF control input; for Type F (active high, no pull-down resistor) the high level is 1.6V to VIN turning the output on and the low level is max 0.25V turning it off. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated output; Type F delivers a maximum output current of 300mA (depends on set voltage), needs an output capacitor of at least 1µF, and is current-limited with foldback (about 50mA short-circuit current). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-25 |
| Category | Power Management |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (2%) | VOUT(E) | 2.45 | | 2.55 | V | IOUT=30mA, VOUT(T)=2.50V | 10 |
| Maximum Output Current | IOUTMAX | 300 | | | mA | VIN=VOUT(T)+1.0V (E-3) | 12 |
| Load Regulation | ΔVOUT | | 15 | 50 | mV | 1mA<IOUT<100mA | 8 |
| Load Regulation 2 | ΔVOUT2 | | | 100 | mV | 1mA<IOUT<300mA | 8 |
| Dropout Voltage 1 | Vdif1 | | 70 | 100 | mV | IOUT=30mA | 10 |
| Dropout Voltage 2 | Vdif2 | | 220 | | mV | IOUT=100mA | 10 |
| Supply Current (Type F) | IDD | | 25 | 50 | μA | VCE=VIN=VOUT(T)+1.0V | 8 |
| Stand-by Current | ISTB | | 0.01 | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 |
| Line Regulation | ΔVOUT/(ΔVIN・VOUT) | | 0.01 | 0.2 | %/V | VOUT(T)+1.0V≦VIN≦10V, IOUT=30mA | 8 |
| Input Voltage | VIN | 2 | | 10 | V | | 8 |
| CE High Level Voltage | VCEH | 1.6 | | | V | max printed as VIN | 8 |
| CE Low Level Voltage | VCEL | | | 0.25 | V | | 8 |
| CE High Level Current (Type F) | ICEH | -0.1 | | 0.1 | μA | VIN=VCE=VOUT(T)+1.0V | 8 |
| CE Low Level Current | ICEL | -0.1 | | 0.1 | μA | VIN=VOUT(T)+1.0V, VCE=VSS | 8 |
| Input Voltage (absolute maximum) | VIN | | | 12 | V | Ta=25℃ | 5 |
| Output Current (absolute maximum) | IOUT | | | 500 | mA | IOUT≦Pd/(VIN-VOUT) | 5 |
| Power Dissipation SOT-25 | Pd | | | 250 | mW | SOT-25, Ta=25℃ | 5 |
| Power Dissipation SOT-25 (PCB mounted) | Pd | | | 600 | mW | SOT-25 PCB mounted, reference data | 5 |
| Operating Ambient Temperature | Topr | -40 | | 85 | ℃ | | 5 |
| Storage Temperature | Tstg | -55 | | 125 | ℃ | | 5 |
| Output Voltage Temperature Characteristics | ΔVOUT/(ΔTopr・VOUT) | | 100 | | ppm/℃ | IOUT=30mA, -40℃<Topr<85℃ | 8 |
| Power Supply Rejection Ratio | PSRR | | 70 | | dB | IOUT=50mA, f=10kHz | 8 |
| Current Limit | Ilim | | 380 | | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 |
| Short Current | ISHORT | | 50 | | mA | VIN=VOUT(T)+1.0V, VCE=VIN | 8 |
| Thermal Resistance SOT-25 | | | 166.67 | | ℃/W | SOT-25 on 40×40mm board | 25 |
## CAD (KiCad official)
- Symbol: `XC6209F252MR-G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files: `xc6209f252mr-g-etched.step` / `xc6209f252mr-g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xc6209f252mr-g.step` / `xc6209f252mr-g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Torex Semicon datasheet](docs/xc6209f252mr-g-datasheet.pdf) (31 pp, sha256 `575dcb9916c5c35f`, retrieved 2026-10-31, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xc6209f252mr-g-datasheet.pdf)