component
XC6206P302PR-MS
Public Made by Adomby adom
MSKSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-89-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
XC6206P302PR-MS
MSKSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
XC6206P302PR-MS from MSKSEMI, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Chip ground terminal; the datasheet gives no separate ground limit, and the output must stay within Vss-0.3 V to Vout+0.3 V per the absolute maximum ratings. |
| 2 | VIN | power_in | Input supply pin; the electrical characteristics specify an input voltage of 1.8 V to 8.0 V, with an absolute maximum of 9 V. |
| 3 | VOUT | power_out | Regulated output pin; the datasheet rates output current at 500 mA absolute maximum, and the electrical table specifies a maximum output current of 100 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance (printed ±2.0%) | -2 | 2 | % | Printed ±2.0% in the part-naming figure; electrical table gives VOUT(E) = VOUT(T)*0.98 to VOUT(T)*1.02 | 3 | ||
| Nominal output voltage (suffix 30 = 3.0 V) | VOUT(T) | 3 | V | Output voltage code 30 in the series table | 3 | ||
| Maximum output current | IOUT (max) | 100 | mA | VIN=VOUT(T)+1V | 4 | ||
| Dropout voltage | Vdrop | 160 | 240 | mV | IOUT=50mA, 2.6V≤VOUT(T)≤3.3V | 4 | |
| Quiescent current | ISS | 7 | μA | VIN=VOUT(T)+1V | 4 | ||
| Load regulation | ΔVOUT | 20 | mV | VIN=VOUT(T)+1V, 1mA≤IOUT≤80mA | 4 | ||
| Input stability | ΔVOUT/(ΔVIN•VOUT) | 0.1 | 0.2 | %/V | IOUT=1mA, VOUT(T)+0.5V≤VIN≤5.5V | 4 | |
| Output voltage temperature coefficient | ΔVOUT/(ΔTa•VOUT) | -100 | 100 | ppm/℃ | VIN=VOUT(T)+1V, IOUT=10mA, -40℃≤Ta≤85℃ | 4 | |
| Input voltage | VIN | 1.8 | 8 | V | 4 | ||
| Ripple rejection | PSRR | 40 | dB | VIN=[VOUT(T)+1]V +1Vp-pAC, IOUT=10mA, f=1kHz | 4 | ||
| Short-circuit current | Ishort | 30 | mA | VIN=VOUT(T)+1.5V, VOUT=Vss | 4 | ||
| Overcurrent protection current | Ilimt | 380 | mA | VIN=VOUT(T)+1.5V | 4 | ||
| Input voltage (absolute maximum) | Vin | 9 | V | 3 | |||
| Output current (absolute maximum) | Iout | 500 | mA | 3 | |||
| Maximum power dissipation | PD | 500 | mW | SOT89-3 package | 3 | ||
| Operating temperature | Tw | -25 | 80 | ℃ | 3 | ||
| Storage temperature | Tc | -40 | 125 | ℃ | 3 | ||
| Soldering temperature | Th | 260 | ℃ | 10s | 3 |
CAD (KiCad official)
- Symbol:
XC6206P302PR-MS - Footprint:
Package_TO_SOT_SMD:SOT-89-3 - 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files:
xc6206p302pr-ms-etched.step/xc6206p302pr-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc6206p302pr-ms.step/xc6206p302pr-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (9 pp, sha256
0973a18a6356ca20, retrieved 2026-10-19, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# XC6206P302PR-MS
**MSKSEMI** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-89-3
XC6206P302PR-MS from MSKSEMI, in a SOT-89-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Chip ground terminal; the datasheet gives no separate ground limit, and the output must stay within Vss-0.3 V to Vout+0.3 V per the absolute maximum ratings. |
| 2 | VIN | power_in | Input supply pin; the electrical characteristics specify an input voltage of 1.8 V to 8.0 V, with an absolute maximum of 9 V. |
| 3 | VOUT | power_out | Regulated output pin; the datasheet rates output current at 500 mA absolute maximum, and the electrical table specifies a maximum output current of 100 mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOT-89-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance (printed ±2.0%) | | -2 | | 2 | % | Printed ±2.0% in the part-naming figure; electrical table gives VOUT(E) = VOUT(T)*0.98 to VOUT(T)*1.02 | 3 |
| Nominal output voltage (suffix 30 = 3.0 V) | VOUT(T) | | 3 | | V | Output voltage code 30 in the series table | 3 |
| Maximum output current | IOUT (max) | 100 | | | mA | VIN=VOUT(T)+1V | 4 |
| Dropout voltage | Vdrop | | 160 | 240 | mV | IOUT=50mA, 2.6V≤VOUT(T)≤3.3V | 4 |
| Quiescent current | ISS | | | 7 | μA | VIN=VOUT(T)+1V | 4 |
| Load regulation | ΔVOUT | | | 20 | mV | VIN=VOUT(T)+1V, 1mA≤IOUT≤80mA | 4 |
| Input stability | ΔVOUT/(ΔVIN•VOUT) | | 0.1 | 0.2 | %/V | IOUT=1mA, VOUT(T)+0.5V≤VIN≤5.5V | 4 |
| Output voltage temperature coefficient | ΔVOUT/(ΔTa•VOUT) | -100 | | 100 | ppm/℃ | VIN=VOUT(T)+1V, IOUT=10mA, -40℃≤Ta≤85℃ | 4 |
| Input voltage | VIN | 1.8 | | 8 | V | | 4 |
| Ripple rejection | PSRR | 40 | | | dB | VIN=[VOUT(T)+1]V +1Vp-pAC, IOUT=10mA, f=1kHz | 4 |
| Short-circuit current | Ishort | | | 30 | mA | VIN=VOUT(T)+1.5V, VOUT=Vss | 4 |
| Overcurrent protection current | Ilimt | | 380 | | mA | VIN=VOUT(T)+1.5V | 4 |
| Input voltage (absolute maximum) | Vin | | | 9 | V | | 3 |
| Output current (absolute maximum) | Iout | | | 500 | mA | | 3 |
| Maximum power dissipation | PD | | | 500 | mW | SOT89-3 package | 3 |
| Operating temperature | Tw | -25 | | 80 | ℃ | | 3 |
| Storage temperature | Tc | -40 | | 125 | ℃ | | 3 |
| Soldering temperature | Th | | | 260 | ℃ | 10s | 3 |
## CAD (KiCad official)
- Symbol: `XC6206P302PR-MS`
- Footprint: `Package_TO_SOT_SMD:SOT-89-3`
- 3D model: SOT-89-3 (KiCad packages3D, STEP)
- 3D model files: `xc6206p302pr-ms-etched.step` / `xc6206p302pr-ms-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `xc6206p302pr-ms.step` / `xc6206p302pr-ms.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MSKSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603371721546215424) (9 pp, sha256 `0973a18a6356ca20`, retrieved 2026-10-19, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/xc6206p302pr-ms-datasheet.pdf)