component
XC61CC2702MR
Public Made by Adomby adom
Torex Semicon Supervisor And Reset ICs, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC61CC2702MR
Torex Semicon · Supervisor And Reset ICs · SOT-23
XC61CC2702MR from Torex Semicon, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Output pin; for CMOS output it equals VIN when VIN is above the detect voltage and equals VSS when VIN falls below it, with output current limited to 50 mA and output voltage rated VSS -0.3 to VIN +0.3 V. |
| 2 | VSS | power_in | Ground pin, the reference for the input, output and detect voltage levels, with input voltage rated VSS -0.3 to 12.0 V (standard voltage types). |
| 3 | VIN | power_in | Supply voltage input with an operating voltage range of 0.7 V to 10.0 V for standard voltage types (VDF 1.6 V to 6.0 V) and an absolute maximum of VSS -0.3 to 12.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Torex Semicon |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage (standard voltage, *2) | VIN | -0.3 | 12 | V | Standard voltage *2; printed as VSS-0.3 ~ 12.0 | 3 | |
| Output Current | IOUT | 50 | mA | 3 | |||
| Output Voltage, CMOS | VOUT | -0.3 | V | CMOS output; printed as VSS-0.3 ~ VIN+0.3, lower bound relative to VSS | 3 | ||
| Power Dissipation, SOT-23 | Pd | 150 | mW | SOT-23 package | 3 | ||
| Operating Ambient Temperature | Topr | -40 | 85 | ℃ | Listed in Absolute Maximum Ratings table | 3 | |
| Storage Temperature | Tstg | -55 | 125 | ℃ | 3 | ||
| Detect Voltage Accuracy | VDF | -2 | 2 | % | Accuracy code 2 (within ±2%) from MPN; VDF(T)=0.8V to 6.0V ± 2% | 2 | |
| Detect Voltage Temperature Characteristics | ΔVDF/(ΔTopr·VDF) | -100 | 100 | ppm/℃ | -40℃ ≦ Topr ≦ 85℃; printed ±100 (TYP.) | 4 | |
| Operating Voltage (standard voltage, *2) | VIN | 0.7 | 10 | V | VDF(T) = 1.6V to 6.0V | 4 | |
| Supply Current | ISS | 0.7 | 2.3 | μA | VIN = 1.5V | 4 | |
| Supply Current | ISS | 0.8 | 2.7 | μA | VIN = 2.0V | 4 | |
| Supply Current | ISS | 0.9 | 3 | μA | VIN = 3.0V | 4 | |
| Supply Current | ISS | 1 | 3.2 | μA | VIN = 4.0V | 4 | |
| Supply Current | ISS | 1.1 | 3.6 | μA | VIN = 5.0V | 4 | |
| Output Current, N-ch (standard voltage, *2) | IOUT | 1 | 2.2 | mA | N-ch VDS = 0.5V, VIN = 1.0V | 4 | |
| Output Current, N-ch (standard voltage, *2) | IOUT | 3 | 7.7 | mA | N-ch VDS = 0.5V, VIN = 2.0V | 4 | |
| Output Current, N-ch (standard voltage, *2) | IOUT | 5 | 10.1 | mA | N-ch VDS = 0.5V, VIN = 3.0V | 4 | |
| Output Current, N-ch (standard voltage, *2) | IOUT | 6 | 11.5 | mA | N-ch VDS = 0.5V, VIN = 4.0V | 4 | |
| Output Current, N-ch (standard voltage, *2) | IOUT | 7 | 13 | mA | N-ch VDS = 0.5V, VIN = 5.0V | 4 | |
| Output Current, CMOS P-ch (standard voltage, *2) | IOUT | -10 | -2 | mA | CMOS, P-ch VDS = 2.1V, VIN = 8.0V | 4 | |
| Leakage Current, CMOS output (Pch) | ILEAK | -10 | nA | VIN=VDF x 0.9, VOUT=0V | 4 | ||
| Delay Time (VDR→VOUT inversion) | tDLY | 0.03 | 0.2 | ms | Inverts from VDR to VOUT | 4 |
CAD (KiCad official)
- Symbol:
XC61CC2702MR - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
xc61cc2702mr-etched.step/xc61cc2702mr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc61cc2702mr.step/xc61cc2702mr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Torex Semicon datasheet (16 pp, sha256
061c94b6e6105333, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).