component
XC2360
Public Made by Adomby adom
Si Change Analog To Digital Converters (ADC), SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC2360
Si Change · Analog To Digital Converters (ADC) · SOT-23-6
XC2360 from Si Change, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input for the single 3.3 V to 5.25 V supply; a 1 µF and a 10 nF decoupling capacitor are required between VDD and GND, placed as close to the pins as possible. |
| 2 | GND | power_in | Analog input signal ground; all analog and digital signals are referenced to this pin. |
| 3 | AIN | input | Unipolar single-ended analog signal input with an input range of 0 V to VDD. |
| 4 | SCK | input | Serial clock input that synchronizes serial data transfer from the converter. |
| 5 | SDO | tri_state | Serial data output carrying the 12-bit conversion result, MSB first; the pin goes to high impedance (tri-state) at the end of the conversion cycle. |
| 6 | CONV | input | Active-low chip select that gates SCK, starts the conversion and frames the output data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Si Change |
| Package | SOT-23-6 |
| Category | Data Acquisition |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (single supply) | VDD | 3.3 | 5.25 | V | 1 | ||
| Operating temperature range | -40 | 85 | ℃ | 1 | |||
| Maximum sample rate | 100 | KSPS | 1 | ||||
| Integral nonlinearity (INL) | -0.5 | 0.5 | LSB | 2 | |||
| Differential nonlinearity (DNL) | -0.5 | 0.5 | LSB | 2 |
CAD (KiCad official)
- Symbol:
XC2360 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
xc2360-etched.step/xc2360-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc2360.step/xc2360.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Si Change datasheet (4 pp, sha256
aa1a3ca9f8f0d538, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).