component
XC11663
Public Made by Adomby adom
Si Change Analog To Digital Converters (ADC), SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXC11663
Si Change · Analog To Digital Converters (ADC) · SOT-23-6
XC11663 from Si Change, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input, operating from 3.3 V to 5.25 V, which also serves as the ADC reference voltage; the datasheet recommends a 1 µF and 10 nF decoupling capacitor pair placed as close to the pins as possible. |
| 2 | GND | power_in | Ground reference for analog input signal; all analog and digital signals are referenced to this pin. |
| 3 | AIN | input | Unipolar single-ended analog signal input with an input range of 0 V to VDD. |
| 4 | SCLK | input | Serial clock input that clocks out the output data and sets the conversion clock source. |
| 5 | DOUT | output | Serial data output for the conversion result, shifted out MSB first; after the conversion cycle the pin goes to high impedance. |
| 6 | CS | input | Active-low chip select that gates SCLK, starts a conversion, and frames the output data; pulling CS high before 10 SCLK cycles aborts the conversion. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Si Change |
| Package | SOT-23-6 |
| Category | Data Acquisition |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Single supply voltage (operating range) | VDD | 3.3 | 5.25 | V | 1 | ||
| Operating temperature range | -40 | 85 | ℃ | 1 | |||
| Maximum sampling rate | 500 | KSPS | 2 | ||||
| Integral nonlinearity error (INL) | INL | -0.5 | 0.5 | LSB | 2 | ||
| Differential nonlinearity error (DNL) | DNL | -0.5 | 0.5 | LSB | 2 |
CAD (KiCad official)
- Symbol:
XC11663 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
xc11663-etched.step/xc11663-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xc11663.step/xc11663.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Si Change datasheet (4 pp, sha256
39ec2e7f75d8fc64, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).