main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers xb5608aj: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray
xb5608aj-etched.glb Publish 0.1.0 · Ray
xb5608aj-etched.step xb5608aj: factory component page (tier=lcsc) · Ray
xb5608aj-hero.glb xb5608aj: hero GLB from the etched model (keeps the MPN mark) · Ray
xb5608aj-hero.overlay.json xb5608aj: hero GLB from the etched model (keeps the MPN mark) · Ray
xb5608aj.glb Publish 0.1.0 · Ray
xb5608aj.kicad_mod Publish 0.1.0 · Ray
xb5608aj.kicad_sym Publish 0.1.0 · Ray
xb5608aj.lbr Publish 0.1.0 · Ray
xb5608aj.step Publish 0.1.0 · Ray

XB5608AJ

XySemi · Battery Management ICs · SOT-23-5

XB5608AJ from XySemi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground; connect the negative terminal of the battery to this pin.
2 GND power_in Ground; connect the negative terminal of the battery to this pin.
3 VDD power_in Power supply pin; the VDD input pin voltage is limited to -0.3 V to 6 V (absolute maximum rating).
4 VM passive Negative terminal of the battery pack, connected to GND through the internal FET switch; the VM input pin voltage is limited to -6 V to 10 V (absolute maximum rating).
5 VM passive Negative terminal of the battery pack, connected to GND through the internal FET switch; the VM input pin voltage is limited to -6 V to 10 V (absolute maximum rating).

Key specifications

Parameter Value
Manufacturer XySemi
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Overcharge Detection Voltage VCU 4.25 4.3 4.35 V 3
Overcharge Release Voltage VCL 4.05 4.1 4.15 V 3
Overdischarge Detection Voltage VDL 2.3 2.4 2.5 V 3
Overdischarge Release Voltage VDR 2.9 3 3.1 V 3
Current Consumption in Normal Operation IOPE 3.5 6 μA VDD=3.6V; VM=0V 3
Current Consumption in Power Down IPDN 1.6 4 μA VDD=2.0V; VM pin floating 3
Overdischarge Current1 Detection IOV1 9 A VDD=3.6V 3
Load Short-Circuiting Detection Current ISHORT 45 A VDD=3.6V 3
Internal Resistance between VM and VDD RVMD 300 kΩ VDD=2.0V; VM pin floating 3
Internal Resistance between VM and GND RVMS 25 kΩ VDD=3.6V; VM=1.0V 3
Equivalent FET on Resistance RSS(ON) 16.5 mΩ VDD=3.6V; IVM=1.0A 3
Over Temperature Protection TSHD+ 150 oC 3
Over Temperature Recovery Degree TSHD- 110 oC 3
Overcharge Voltage Detection Delay Time tCU 130 200 mS 4
Overdischarge Voltage Detection Delay Time tDL 40 60 mS 4
Overdischarge Current Detection Delay Time tIOV 8 mS VDD=3.6V 4
Load Short-Circuiting Detection Delay Time tSHORT 360 uS VDD=3.6V 4
VDD input pin voltage VDD -0.3 6 V 2
VM input pin voltage VM -6 10 V 2
Operating Ambient Temperature -40 85 °C 2
Maximum Junction Temperature 125 °C 2
Storage Temperature -55 150 °C 2
Lead Temperature (Soldering, 10 sec) 300 °C Soldering, 10 sec 3
Power Dissipation at T=25°C 0.4 W T=25°C 3
Package Thermal Resistance (Junction to Ambient) θJA 250 °C/W 3
Package Thermal Resistance (Junction to Case) θJC 130 °C/W 3
HBM ESD 2000 V HBM 3

CAD (KiCad official)

  • Symbol: XB5608AJ
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xb5608aj-etched.step / xb5608aj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xb5608aj.step / xb5608aj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XySemi datasheet (12 pp, sha256 76a568c2a8510e49, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF