main
History Download
Ray Publish 0.1.0 f65c2a0

XB3480M3-3.3

XINLUDA · Linear Voltage Regulators (LDO) · SOT-23-3

XB3480M3-3.3 from XINLUDA, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT power_out Regulated 3.3-V output voltage (100-mA minimum load current ensured), requires at least 0.1 µF output capacitance for stability.
2 IN power_in Input voltage supply, absolute maximum 25 V (recommended operating maximum 18 V), requires at least 0.1 µF input capacitance.
3 GND power_in Common ground, with ground return connections for the input and output capacitors placed close to this pin.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package SOT-23-3
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 3.17 3.3 3.43 V VIN = VNOM + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA 5
Output voltage over temperature VOUT 3.14 3.46 V VIN = VNOM + 1.5 V, 1 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 85°C 5
Line regulation ΔVOUT 10 mV VNOM + 1.5 V ≤ VIN ≤ 30 V, IOUT = 1 mA 5
Line regulation over temperature ΔVOUT 25 mV VNOM + 1.5 V ≤ VIN ≤ 30 V, IOUT = 1 mA, −40°C ≤ TJ ≤ 85°C 5
Load regulation ΔVOUT 20 mV VIN = VNOM + 1.5 V, 10 mA ≤ IOUT ≤ 100 mA 5
Load regulation over temperature ΔVOUT 40 mV VIN = VNOM + 1.5 V, 10 mA ≤ IOUT ≤ 100 mA, −40°C ≤ TJ ≤ 85°C 5
Ground pin current IGND 2 mA VNOM + 1.5 V ≤ VIN ≤ 30 V, No Load 5
Ground pin current over temperature IGND 5 mA VNOM + 1.5 V ≤ VIN ≤ 30 V, No Load, −40°C ≤ TJ ≤ 85°C 5
Dropout voltage VIN - VOUT 0.7 0.9 V IOUT = 10 mA 5
Dropout voltage over temperature VIN - VOUT 1 V IOUT = 10 mA, −40°C ≤ TJ ≤ 85°C 5
Dropout voltage VIN - VOUT 0.9 1.1 V IOUT = 100 mA 5
Dropout voltage over temperature VIN - VOUT 1.2 V IOUT = 100 mA, −40°C ≤ TJ ≤ 85°C 5
Output noise voltage en 100 150 µVrms VIN = 10 V, Bandwidth: 10 Hz to 100 kHz 5
Input voltage (IN to GND) -0.3 25 V 4
Power dissipation 250 mW 4
Junction temperature Tj 150 °C 4
Storage temperature Tstg -50 150 °C 4
Maximum input voltage (IN to GND) 0 18 V 4
Operation temperature -40 85 °C 4
Junction-to-ambient thermal resistance RθJA 269.6 °C/W SOT23-3 4
Junction-to-case (top) thermal resistance RθJC(top) 141.1 °C/W SOT23-3 4
Junction-to-board thermal resistance RθJB 63.1 °C/W SOT23-3 4
Junction-to-top characterization parameter ψJT 24.2 °C/W SOT23-3 4
Junction-to-board characterization parameter ψJB 62.1 °C/W SOT23-3 4
ESD HBM V(ESD) -2000 2000 V Human-body model, ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -500 500 V Charged-device model, JESD22-C101 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper and as near as practical to the respective LDO pin connections. Place ground return connections to the input and output capacitors, and to the LDO ground pin as close to each other as possible, connec 10

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: XB3480M3-3.3
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: xb3480m3-3-3-etched.step / xb3480m3-3-3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xb3480m3-3-3.step / xb3480m3-3-3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (11 pp, sha256 9dce0ae803a9369c, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF