XAL7030-332MEB
Public Made by Adomby adom
Coilcraft Power Inductors - SMD. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
55dac9b
XAL7030-332MEB
Coilcraft · Power Inductors - SMD · Unknown
XAL7030-332MEB from Coilcraft, in a Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Start (short) lead: the terminal beside Coilcraft's top-side bar mark. Connect the high dv/dt node (switch node) here for lowest EMI. |
| 2 | 2 | passive | Finish terminal (the side away from the bar mark). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Coilcraft |
| Package | Unknown |
| Category | Power Inductors - SMD |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | -20 | 20 | % | 1 | |||
| DC resistance (DCR) | DCR | 19.5 | 21.45 | mOhms | DCR measured on a micro-ohmmeter. | 1 | |
| Ambient temperature | -40 | 125 | °C | with (40°C rise) Irms current. | 1 | ||
| Operating voltage | 60 | V | Voltage capability varies by part number and in many cases may be higher than the listed voltage. | 1 | |||
| Storage temperature (component) | -55 | 165 | °C | Component. | 1 | ||
| Storage temperature (tape and reel packaging) | -55 | 80 | °C | Tape and reel packaging. | 1 | ||
| Maximum part temperature | 165 | °C | Ambient + temp rise. | 1 | |||
| Resistance to soldering heat | 260 | °C | Max three 40 second reflows, parts cooled to room temperature between cycles. | 1 | |||
| Nominal inductance | L | 3.3 | µH | Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. | 1 | ||
| Self-resonant frequency (SRF) | SRF | 25 | MHz | SRF measured using Agilent/HP 4395A or equivalent. | 1 | ||
| Saturation current (Isat) | Isat | 12.3 | A | DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current. | 1 | ||
| Irms current (20°C rise) | Irms | 8 | A | Current that causes the specified 20°C temperature rise from 25°C ambient. | 1 | ||
| Irms current (40°C rise) | Irms | 10 | A | Current that causes the specified 40°C temperature rise from 25°C ambient. | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic | 1 |
CAD (Adom-generated)
- Symbol:
XAL7030-332MEB - Footprint:
Adom_Gen:Coilcraft_XAL7030_f2d839 - 3D model: generated to fit the land (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Coilcraft datasheet (4 pp, sha256
c323552b4c1acd5a, retrieved 2026-11-13, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Coilcraft XAL7030 p.2 'Recommended Land Pattern': pads 0.256 / 6,50 long, 0.116 / 2,94 between pads; 'Land pattern width' for dash -332 0.070 / 1.78. Pad centres at x +/-(2.94/2 + 1.78/2) = +/-2.36. Pad 1 = the start (short) lead, the terminal beside the top-side bar mark.
# XAL7030-332MEB
**Coilcraft** · Power Inductors - SMD · Unknown
XAL7030-332MEB from Coilcraft, in a Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Start (short) lead: the terminal beside Coilcraft's top-side bar mark. Connect the high dv/dt node (switch node) here for lowest EMI. |
| 2 | 2 | passive | Finish terminal (the side away from the bar mark). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Coilcraft |
| Package | Unknown |
| Category | Power Inductors - SMD |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance | | -20 | | 20 | % | | 1 |
| DC resistance (DCR) | DCR | | 19.5 | 21.45 | mOhms | DCR measured on a micro-ohmmeter. | 1 |
| Ambient temperature | | -40 | | 125 | °C | with (40°C rise) Irms current. | 1 |
| Operating voltage | | | | 60 | V | Voltage capability varies by part number and in many cases may be higher than the listed voltage. | 1 |
| Storage temperature (component) | | -55 | | 165 | °C | Component. | 1 |
| Storage temperature (tape and reel packaging) | | -55 | | 80 | °C | Tape and reel packaging. | 1 |
| Maximum part temperature | | | | 165 | °C | Ambient + temp rise. | 1 |
| Resistance to soldering heat | | | | 260 | °C | Max three 40 second reflows, parts cooled to room temperature between cycles. | 1 |
| Nominal inductance | L | | 3.3 | | µH | Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. | 1 |
| Self-resonant frequency (SRF) | SRF | | 25 | | MHz | SRF measured using Agilent/HP 4395A or equivalent. | 1 |
| Saturation current (Isat) | Isat | | 12.3 | | A | DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current. | 1 |
| Irms current (20°C rise) | Irms | | 8 | | A | Current that causes the specified 20°C temperature rise from 25°C ambient. | 1 |
| Irms current (40°C rise) | Irms | | 10 | | A | Current that causes the specified 40°C temperature rise from 25°C ambient. | 1 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic | 1 |
## CAD (Adom-generated)
- Symbol: `XAL7030-332MEB`
- Footprint: `Adom_Gen:Coilcraft_XAL7030_f2d839`
- 3D model: generated to fit the land (STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Coilcraft datasheet](https://www.mouser.com/datasheet/3/995/1/xal7030.pdf) (4 pp, sha256 `c323552b4c1acd5a`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Coilcraft XAL7030 p.2 'Recommended Land Pattern': pads 0.256 / 6,50 long, 0.116 / 2,94 between pads; 'Land pattern width' for dash -332 0.070 / 1.78. Pad centres at x +/-(2.94/2 + 1.78/2) = +/-2.36. Pad 1 = the start (short) lead, the terminal beside the top-side bar mark.
[Datasheet PDF](docs/xal7030-332meb-datasheet.pdf)