main
Ray
Publish 0.1.0
afe7710
X9C104SIZT1
Intersil(Renesas Electronics) · Digital Potentiometers · SOIC-8
X9C104SIZT1 from Intersil(Renesas Electronics), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INC | input | The INC input is negative-edge triggered; toggling INC moves the wiper and increments or decrements the counter in the direction set by U/D. |
| 2 | U/D | input | The U/D input controls the direction of wiper movement and whether the counter is incremented or decremented. |
| 3 | RH/VH | passive | High terminal of the resistor array, equivalent to the fixed end of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V. |
| 4 | VSS | power_in | Ground reference (VSS) for the device. |
| 5 | VW/RW | passive | Wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with a typical series resistance of 40Ω. |
| 6 | RL/VL | passive | Low terminal of the resistor array, equivalent to the fixed end of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V. |
| 7 | CS | input | The device is selected when CS is LOW; the counter value is stored in nonvolatile memory when CS returns HIGH while INC is HIGH. |
| 8 | VCC | power_in | Supply voltage, specified as 5V ±10% for the X9C102/103/104/503 family. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| End to end resistance variation | RTOTAL | -20 | 20 | % | 4 | ||
| VH terminal voltage | VVH/RH | -5 | 5 | V | 4 | ||
| VL terminal voltage | VVL/RL | -5 | 5 | V | 4 | ||
| Wiper current | IW | -4.4 | 4.4 | mA | 4 | ||
| Absolute linearity | -1 | 1 | MI | VW(n)(actual) - VW(n)(expected) | 4 | ||
| Relative linearity | -0.2 | 0.2 | MI | VW(n + 1)(actual) - [VW(n) + MI] | 4 | ||
| RTOTAL temperature coefficient (X9C103/503/104) | RTOTAL | -300 | 300 | ppm/°C | X9C103/503/104 | 4 | |
| Ratiometric temperature coefficient | -20 | 20 | ppm/°C | 4 | |||
| Wiper resistance | RW | 40 | 100 | Ω | Wiper Current = ±1mA | 4 | |
| VCC active current | ICC | 1 | 3 | mA | CS = VIL, U/D = VIL or VIH and INC = 0.4V to 2.4V @ max. tCYC | 5 | |
| Standby supply current | ISB | 200 | 750 | µA | CS = VCC - 0.3V, U/D and INC = VSS or VCC - 0.3V | 5 | |
| CS, INC, U/D input leakage current | ILI | -10 | 10 | µA | VIN = VSS to VCC | 5 | |
| CS, INC, U/D input HIGH voltage | VIH | 2 | V | 5 | |||
| CS, INC, U/D input LOW voltage | VIL | 0.8 | V | 5 | |||
| CS, INC, U/D input capacitance | CIN | 10 | pF | VCC = 5V, VIN = VSS, TA = 25°C, f = 1MHz | 5 | ||
| CS to INC setup | tCI | 100 | ns | 6 | |||
| INC HIGH to U/D change | tID | 100 | ns | 6 | |||
| U/D to INC setup | tDI | 2.9 | µs | 6 | |||
| INC LOW period | tIL | 1 | µs | 6 | |||
| INC HIGH period | tIH | 1 | µs | 6 | |||
| INC inactive to CS inactive | tIC | 1 | µs | 6 | |||
| CS deselect time (STORE) | tCPH | 20 | ms | 6 | |||
| CS deselect time (NO STORE) | tCPH | 100 | ns | 6 | |||
| INC to VW/RW change | tIW | 100 | µs | 6 | |||
| INC cycle time | tCYC | 2 | µs | 6 | |||
| INC input rise and fall time | tR, tF | 500 | µs | 6 | |||
| Power-up to wiper stable | tPU | 500 | µs | 6 | |||
| VCC power-up rate | tR VCC | 0.2 | 50 | V/ms | 6 | ||
| Supply voltage VCC | VCC | -10 | 10 | % | 5V ±10% | 4 | |
| Commercial operating temperature | TA | 0 | 70 | °C | Commercial | 4 | |
| Industrial operating temperature | TA | -40 | 85 | °C | Industrial | 4 | |
| Temperature under bias | -65 | 135 | °C | 4 | |||
| Storage temperature | -65 | 150 | °C | 4 | |||
| Voltage on CS, INC, U/D and VCC with respect to VSS | VCC | -1 | 7 | V | 4 | ||
| Voltage on VH/RH and VL/RL referenced to VSS | VH/RH, VL/RL | -8 | 8 | V | 4 | ||
| Terminal voltage difference ΔV = /VH/RH - VL/RL/ (X9C104) | ΔV | 10 | V | X9C103, X9C503, and X9C104 | 4 | ||
| Lead temperature (soldering, 10 seconds) | 300 | °C | 4 | ||||
| Power rating (X9C103/104/503) | 10 | mW | X9C103/104/503 | 4 | |||
| Nominal resistance (end to end, X9C104) | RTOTAL | 100 | kΩ | X9C104 | 2 | ||
| Potentiometer capacitance CH | CH | 10 | pF | See Circuit #3, Macro Model | 4 | ||
| Potentiometer capacitance CL | CL | 10 | pF | See Circuit #3, Macro Model | 4 | ||
| Potentiometer capacitance CW | CW | 25 | pF | See Circuit #3, Macro Model | 4 |
CAD (KiCad official)
- Symbol:
X9C104SIZT1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
x9c104sizt1-etched.step/x9c104sizt1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x9c104sizt1.step/x9c104sizt1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Intersil(Renesas Electronics) datasheet (11 pp, sha256
25548de98d985cbd, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# X9C104SIZT1
**Intersil(Renesas Electronics)** · Digital Potentiometers · SOIC-8
X9C104SIZT1 from Intersil(Renesas Electronics), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INC | input | The INC input is negative-edge triggered; toggling INC moves the wiper and increments or decrements the counter in the direction set by U/D. |
| 2 | U/D | input | The U/D input controls the direction of wiper movement and whether the counter is incremented or decremented. |
| 3 | RH/VH | passive | High terminal of the resistor array, equivalent to the fixed end of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V. |
| 4 | VSS | power_in | Ground reference (VSS) for the device. |
| 5 | VW/RW | passive | Wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with a typical series resistance of 40Ω. |
| 6 | RL/VL | passive | Low terminal of the resistor array, equivalent to the fixed end of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V. |
| 7 | CS | input | The device is selected when CS is LOW; the counter value is stored in nonvolatile memory when CS returns HIGH while INC is HIGH. |
| 8 | VCC | power_in | Supply voltage, specified as 5V ±10% for the X9C102/103/104/503 family. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| End to end resistance variation | RTOTAL | -20 | | 20 | % | | 4 |
| VH terminal voltage | VVH/RH | -5 | | 5 | V | | 4 |
| VL terminal voltage | VVL/RL | -5 | | 5 | V | | 4 |
| Wiper current | IW | -4.4 | | 4.4 | mA | | 4 |
| Absolute linearity | | -1 | | 1 | MI | VW(n)(actual) - VW(n)(expected) | 4 |
| Relative linearity | | -0.2 | | 0.2 | MI | VW(n + 1)(actual) - [VW(n) + MI] | 4 |
| RTOTAL temperature coefficient (X9C103/503/104) | RTOTAL | -300 | | 300 | ppm/°C | X9C103/503/104 | 4 |
| Ratiometric temperature coefficient | | -20 | | 20 | ppm/°C | | 4 |
| Wiper resistance | RW | | 40 | 100 | Ω | Wiper Current = ±1mA | 4 |
| VCC active current | ICC | | 1 | 3 | mA | CS = VIL, U/D = VIL or VIH and INC = 0.4V to 2.4V @ max. tCYC | 5 |
| Standby supply current | ISB | | 200 | 750 | µA | CS = VCC - 0.3V, U/D and INC = VSS or VCC - 0.3V | 5 |
| CS, INC, U/D input leakage current | ILI | -10 | | 10 | µA | VIN = VSS to VCC | 5 |
| CS, INC, U/D input HIGH voltage | VIH | 2 | | | V | | 5 |
| CS, INC, U/D input LOW voltage | VIL | | | 0.8 | V | | 5 |
| CS, INC, U/D input capacitance | CIN | | 10 | | pF | VCC = 5V, VIN = VSS, TA = 25°C, f = 1MHz | 5 |
| CS to INC setup | tCI | 100 | | | ns | | 6 |
| INC HIGH to U/D change | tID | 100 | | | ns | | 6 |
| U/D to INC setup | tDI | 2.9 | | | µs | | 6 |
| INC LOW period | tIL | 1 | | | µs | | 6 |
| INC HIGH period | tIH | 1 | | | µs | | 6 |
| INC inactive to CS inactive | tIC | 1 | | | µs | | 6 |
| CS deselect time (STORE) | tCPH | 20 | | | ms | | 6 |
| CS deselect time (NO STORE) | tCPH | 100 | | | ns | | 6 |
| INC to VW/RW change | tIW | | | 100 | µs | | 6 |
| INC cycle time | tCYC | 2 | | | µs | | 6 |
| INC input rise and fall time | tR, tF | | | 500 | µs | | 6 |
| Power-up to wiper stable | tPU | | | 500 | µs | | 6 |
| VCC power-up rate | tR VCC | 0.2 | | 50 | V/ms | | 6 |
| Supply voltage VCC | VCC | -10 | | 10 | % | 5V ±10% | 4 |
| Commercial operating temperature | TA | 0 | | 70 | °C | Commercial | 4 |
| Industrial operating temperature | TA | -40 | | 85 | °C | Industrial | 4 |
| Temperature under bias | | -65 | | 135 | °C | | 4 |
| Storage temperature | | -65 | | 150 | °C | | 4 |
| Voltage on CS, INC, U/D and VCC with respect to VSS | VCC | -1 | | 7 | V | | 4 |
| Voltage on VH/RH and VL/RL referenced to VSS | VH/RH, VL/RL | -8 | | 8 | V | | 4 |
| Terminal voltage difference ΔV = /VH/RH - VL/RL/ (X9C104) | ΔV | | | 10 | V | X9C103, X9C503, and X9C104 | 4 |
| Lead temperature (soldering, 10 seconds) | | | | 300 | °C | | 4 |
| Power rating (X9C103/104/503) | | | | 10 | mW | X9C103/104/503 | 4 |
| Nominal resistance (end to end, X9C104) | RTOTAL | | 100 | | kΩ | X9C104 | 2 |
| Potentiometer capacitance CH | CH | | 10 | | pF | See Circuit #3, Macro Model | 4 |
| Potentiometer capacitance CL | CL | | 10 | | pF | See Circuit #3, Macro Model | 4 |
| Potentiometer capacitance CW | CW | | 25 | | pF | See Circuit #3, Macro Model | 4 |
## CAD (KiCad official)
- Symbol: `X9C104SIZT1`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `x9c104sizt1-etched.step` / `x9c104sizt1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `x9c104sizt1.step` / `x9c104sizt1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Intersil(Renesas Electronics) datasheet](docs/x9c104sizt1-datasheet.pdf) (11 pp, sha256 `25548de98d985cbd`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/x9c104sizt1-datasheet.pdf)