main
Ray
Publish 0.1.0
73b2d7e
X9C103SZ
RENESAS · Digital Potentiometers · SOIC-8
X9C103SZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INC | input | The INC input is negative-edge triggered, and toggling INC moves the wiper and increments or decrements the counter in the direction set by U/D. |
| 2 | U/D | input | The U/D input controls the direction of wiper movement and whether the counter is incremented or decremented. |
| 3 | VH/RH | passive | The VH/RH high terminal is equivalent to the fixed terminal of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V. |
| 4 | VSS | power_in | VSS is the ground reference pin of the device. |
| 5 | VW/RW | passive | VW/RW is the wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with a wiper terminal series resistance typically 40. |
| 6 | RL/VL | passive | The RL/VL low terminal is equivalent to the fixed terminal of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V. |
| 7 | CS | input | The device is selected when CS is LOW, and the counter value is stored in non-volatile memory when CS returns HIGH while INC is also HIGH. |
| 8 | VCC | power_in | VCC is the supply pin, specified at 5V ±10% in the recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| End-to-End Resistance Variation | RTOTAL | -20 | 20 | % | 4 | ||
| RTOTAL Temperature Coefficient X9C103, X9C503, X9C104 | RTOTAL | -300 | 300 | ppm/°C | 4 | ||
| Ratiometric Temperature Coefficient | -20 | 20 | ppm/°C | 4 | |||
| VH Terminal Voltage | VVH/RH | -5 | 5 | V | 4 | ||
| VL Terminal Voltage | VVL/RL | -5 | 5 | V | 4 | ||
| Wiper Current | IW | -4.4 | 4.4 | mA | 4 | ||
| Wiper Resistance | RW | 40 | 100 | Wiper Current = ±1mA | 4 | ||
| Resistor Noise | -120 | dBV | Ref 1kHz | 4 | |||
| Charge Pump Noise | 20 | mVRMS | @ 850kHz | 4 | |||
| Absolute Linearity | VW(n)(actual) - VW(n)(EXPECTED) | -1 | 1 | MI | (Note 6) | 4 | |
| Relative Linearity | VW(n + 1)(ACTUAL) - [VW(n) + MI] | -0.2 | 0.2 | MI | (Note 6) | 4 | |
| Active Current | ICC | 1 | 3 | mA | CS = VIL, U/D = VIL or VIH and INC = 0.4V to 2.4V at Max tCYC | 4 | |
| Standby Supply Current | ISB | 200 | 750 | µA | CS = VCC - 0.3V, U/D and INC =VSS or VCC - 0.3V | 4 | |
| CS, INC, U/D Input Leakage Current | ILI | -10 | 10 | µA | VIN = VSS to VCC | 4 | |
| CS, INC, U/D input HIGH Voltage | VIH | 2 | V | 4 | |||
| CS, INC, U/D input LOW Voltage | VIL | 0.8 | V | 4 | |||
| CS, INC, U/D Input Capacitance | CIN | 10 | pF | VCC = 5V, VIN = VSS, TA = +25°C, f = 1MHz | 4 | ||
| CS to INC Setup | tCI | 100 | ns | 5 | |||
| INC HIGH to U/D Change | tID | 100 | ns | 5 | |||
| U/D to INC Setup | tDI | 2.9 | µs | 5 | |||
| INC LOW Period | tIL | 1 | µs | 5 | |||
| INC HIGH Period | tIH | 1 | µs | 5 | |||
| INC Inactive to CS Inactive | tIC | 1 | µs | 5 | |||
| CS Deselect Time (STORE) | tCPH | 20 | ms | 5 | |||
| CS Deselect Time (NO STORE) | tCPH | 100 | ns | 5 | |||
| INC to VW/RW Change | tIW | 100 | µs | 5 | |||
| INC Cycle Time | tCYC | 2 | µs | 5 | |||
| INC Input Rise and Fall Time | tCYC | 500 | µs | 5 | |||
| Power-up to Wiper Stable | tR, tF | 500 | µs | 5 | |||
| VCC Power-up Rate | tPU | 0.2 | 50 | V/ms | 5 | ||
| End-to-End Resistance (nominal, X9C103) | RTOTAL | 10 | k | 2 | |||
| Voltage on CS, INC, U/D and VCC with Respect to VSS | -1 | 7 | V | 4 | |||
| Voltage on VH/RH and VL/RL Referenced to VSS | -8 | 8 | V | 4 | |||
| Terminal differential voltage V = /VH/RH - VL/RL/ (X9C103) | V | 10 | V | X9C103, X9C104, and X9C503 | 4 | ||
| Power Rating (X9C103) | 10 | mW | X9C103 | 4 | |||
| Temperature Under Bias | -65 | 135 | °C | 4 | |||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Commercial Temperature Range | 0 | 70 | °C | 4 | |||
| Industrial Temperature Range | -40 | 85 | °C | 4 | |||
| Supply Voltage Range (VCC) | VCC | 5 | V | 5V ±10% | 4 |
CAD (KiCad official)
- Symbol:
X9C103SZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
x9c103sz-etched.step/x9c103sz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x9c103sz.step/x9c103sz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (12 pp, sha256
f6e174514ebd0e4d, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# X9C103SZ
**RENESAS** · Digital Potentiometers · SOIC-8
X9C103SZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INC | input | The INC input is negative-edge triggered, and toggling INC moves the wiper and increments or decrements the counter in the direction set by U/D. |
| 2 | U/D | input | The U/D input controls the direction of wiper movement and whether the counter is incremented or decremented. |
| 3 | VH/RH | passive | The VH/RH high terminal is equivalent to the fixed terminal of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V. |
| 4 | VSS | power_in | VSS is the ground reference pin of the device. |
| 5 | VW/RW | passive | VW/RW is the wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with a wiper terminal series resistance typically 40. |
| 6 | RL/VL | passive | The RL/VL low terminal is equivalent to the fixed terminal of a mechanical potentiometer, with a minimum voltage of -5V and a maximum of +5V. |
| 7 | CS | input | The device is selected when CS is LOW, and the counter value is stored in non-volatile memory when CS returns HIGH while INC is also HIGH. |
| 8 | VCC | power_in | VCC is the supply pin, specified at 5V ±10% in the recommended operating conditions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| End-to-End Resistance Variation | RTOTAL | -20 | | 20 | % | | 4 |
| RTOTAL Temperature Coefficient X9C103, X9C503, X9C104 | RTOTAL | -300 | | 300 | ppm/°C | | 4 |
| Ratiometric Temperature Coefficient | | -20 | | 20 | ppm/°C | | 4 |
| VH Terminal Voltage | VVH/RH | -5 | | 5 | V | | 4 |
| VL Terminal Voltage | VVL/RL | -5 | | 5 | V | | 4 |
| Wiper Current | IW | -4.4 | | 4.4 | mA | | 4 |
| Wiper Resistance | RW | | 40 | 100 | | Wiper Current = ±1mA | 4 |
| Resistor Noise | | | | -120 | dBV | Ref 1kHz | 4 |
| Charge Pump Noise | | | | 20 | mVRMS | @ 850kHz | 4 |
| Absolute Linearity | VW(n)(actual) - VW(n)(EXPECTED) | -1 | | 1 | MI | (Note 6) | 4 |
| Relative Linearity | VW(n + 1)(ACTUAL) - [VW(n) + MI] | -0.2 | | 0.2 | MI | (Note 6) | 4 |
| Active Current | ICC | | 1 | 3 | mA | CS = VIL, U/D = VIL or VIH and INC = 0.4V to 2.4V at Max tCYC | 4 |
| Standby Supply Current | ISB | | 200 | 750 | µA | CS = VCC - 0.3V, U/D and INC =VSS or VCC - 0.3V | 4 |
| CS, INC, U/D Input Leakage Current | ILI | -10 | | 10 | µA | VIN = VSS to VCC | 4 |
| CS, INC, U/D input HIGH Voltage | VIH | 2 | | | V | | 4 |
| CS, INC, U/D input LOW Voltage | VIL | | | 0.8 | V | | 4 |
| CS, INC, U/D Input Capacitance | CIN | | | 10 | pF | VCC = 5V, VIN = VSS, TA = +25°C, f = 1MHz | 4 |
| CS to INC Setup | tCI | 100 | | | ns | | 5 |
| INC HIGH to U/D Change | tID | 100 | | | ns | | 5 |
| U/D to INC Setup | tDI | 2.9 | | | µs | | 5 |
| INC LOW Period | tIL | 1 | | | µs | | 5 |
| INC HIGH Period | tIH | 1 | | | µs | | 5 |
| INC Inactive to CS Inactive | tIC | 1 | | | µs | | 5 |
| CS Deselect Time (STORE) | tCPH | | | 20 | ms | | 5 |
| CS Deselect Time (NO STORE) | tCPH | | | 100 | ns | | 5 |
| INC to VW/RW Change | tIW | | | 100 | µs | | 5 |
| INC Cycle Time | tCYC | 2 | | | µs | | 5 |
| INC Input Rise and Fall Time | tCYC | | | 500 | µs | | 5 |
| Power-up to Wiper Stable | tR, tF | | | 500 | µs | | 5 |
| VCC Power-up Rate | tPU | 0.2 | | 50 | V/ms | | 5 |
| End-to-End Resistance (nominal, X9C103) | RTOTAL | | 10 | | k | | 2 |
| Voltage on CS, INC, U/D and VCC with Respect to VSS | | -1 | | 7 | V | | 4 |
| Voltage on VH/RH and VL/RL Referenced to VSS | | -8 | | 8 | V | | 4 |
| Terminal differential voltage V = /VH/RH - VL/RL/ (X9C103) | V | | | 10 | V | X9C103, X9C104, and X9C503 | 4 |
| Power Rating (X9C103) | | | | 10 | mW | X9C103 | 4 |
| Temperature Under Bias | | -65 | | 135 | °C | | 4 |
| Storage Temperature | | -65 | | 150 | °C | | 4 |
| Commercial Temperature Range | | 0 | | 70 | °C | | 4 |
| Industrial Temperature Range | | -40 | | 85 | °C | | 4 |
| Supply Voltage Range (VCC) | VCC | | 5 | | V | 5V ±10% | 4 |
## CAD (KiCad official)
- Symbol: `X9C103SZ`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `x9c103sz-etched.step` / `x9c103sz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `x9c103sz.step` / `x9c103sz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/x9c103sz-datasheet.pdf) (12 pp, sha256 `f6e174514ebd0e4d`, retrieved 2026-11-02, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/x9c103sz-datasheet.pdf)