main
Ray
Publish 0.1.0
457eb1a
X9318WS8Z
RENESAS · Digital Potentiometers · SOIC-8
X9318WS8Z from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INC | input | Increment input: toggling INC while CS is low moves the wiper up or down; the INC input is negative-edge triggered, and CS and INC must be high before or with VCC at power-up to prevent unwanted tap changes. |
| 2 | U/D | input | Up/Down input controls the direction of wiper movement and whether the counter increments or decrements. |
| 3 | RH | passive | High terminal, equivalent to one of the fixed terminals of a mechanical potentiometer, rated 0 to 8 V with VSS = 0 V and an absolute maximum of +10 V to ground. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | RW | passive | Wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with typical wiper series resistance of 40 Ω and a wiper current limit of ±3.0 mA. |
| 6 | RL | passive | Low terminal, equivalent to one of the fixed terminals of a mechanical potentiometer, rated 0 to 8 V with VSS = 0 V and an absolute maximum of +10 V to ground. |
| 7 | CS | input | Chip select: the device is selected when CS is LOW and de-selected when CS is HIGH; the wiper position is stored to nonvolatile memory when CS returns HIGH while INC is HIGH. |
| 8 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V (5 V ± 10%), with absolute maximum of -1 V to +7 V relative to VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| End to end resistance tolerance | -20 | 20 | % | See ordering information for values | 3 | ||
| RTOTAL temperature coefficient | -300 | 300 | ppm/°C | 3 | |||
| Ratiometric temperature coefficient | -20 | 20 | ppm/°C | 3 | |||
| RH/RL terminal voltage | VRH/RL | 8 | V | VSS = 0V | 3 | ||
| Power rating | 25 | mW | 3 | ||||
| Wiper resistance | RW | 40 | 200 | Ω | IW = 1mA | 3 | |
| Wiper current | IW | -3 | 3 | mA | See test circuit | 3 | |
| Noise | -120 | dBV | Ref: 1kHz | 3 | |||
| Absolute linearity | -1 | 1 | MI | V(RH) = 8V, V(RL) = 0V | 3 | ||
| Relative linearity | -0.2 | 0.2 | MI | 3 | |||
| Potentiometer capacitance CH | CH | 10 | pF | See equivalent circuit | 3 | ||
| Potentiometer capacitance CL | CL | 10 | pF | See equivalent circuit | 3 | ||
| Potentiometer capacitance CW | CW | 25 | pF | See equivalent circuit | 3 | ||
| End to end resistance (RTOTAL nominal, 8 Ld SOIC W grade) | RTOTAL | 10 | k | Ordering information, 8 Ld SOIC (150 mil) | 2 | ||
| VCC Supply Voltage | VCC | 4.5 | 5.5 | V | 3 | ||
| VCC active current (Increment) | ICC | 1 | 3 | mA | CS = VIL, U/D = VIL or VIH, INC = 0.4V/2.4V @ min. tCYC; RL, RH, RW not connected | 4 | |
| Standby supply current | ISB | 300 | 1000 | µA | CS ≥ 2.4V, U/D and INC = 0.4V; RL, RH, RW not connected | 4 | |
| CS, INC, U/D input leakage current | ILI | -10 | 10 | µA | VIN = VSS to VCC | 4 | |
| CS, INC, U/D input HIGH voltage | VIH | 2 | V | 4 | |||
| CS, INC, U/D input LOW voltage | VIL | -1 | 0.8 | V | 4 | ||
| CS, INC, U/D input capacitance | CIN | 10 | pF | VCC = 5V, VIN = VSS, TA = 25°C, f = 1MHz | 4 | ||
| Minimum endurance | 100000 | Data changes per bit | 4 | ||||
| Data retention | 100 | Years | 4 | ||||
| CS to INC setup | tCl | 100 | ns | 5 | |||
| INC HIGH to U/D change | tID | 100 | ns | 5 | |||
| U/D to INC setup | tDI | 1 | µs | 5 | |||
| INC LOW period | tIL | 1 | µs | 5 | |||
| INC HIGH period | tIH | 1 | µs | 5 | |||
| INC inactive to CS inactive | tIC | 1 | µs | 5 | |||
| CS deselect time (STORE) | tCPHS | 20 | ms | 5 | |||
| CS deselect time (NO STORE) | tCPHNS | 1 | µs | 5 | |||
| INC to RW change | tIW | 100 | 500 | µs | 5 | ||
| INC cycle time | tCYC | 4 | µs | 5 | |||
| INC input rise and fall time | tR, tF | 500 | µs | 5 | |||
| Power-up to wiper stable | tPU | 500 | µs | 5 | |||
| VCC power-up rate | tR VCC | 0.2 | 50 | V/ms | 5 | ||
| Junction temperature under bias | -65 | 135 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Voltage on CS, INC, U/D and VCC with respect to VSS | -1 | 7 | V | 3 | |||
| Voltage on RH, RW, RL to ground | 10 | V | 3 | ||||
| Lead temperature (soldering 10s) | 300 | °C | Soldering 10s | 3 | |||
| Wiper current IW (10s) | IW | -6 | 6 | mA | 10s | 3 | |
| Operating temperature range (W grade) | 0 | 70 | °C | Ordering information for this W grade, 8 Ld SOIC (150 mil) | 2 |
CAD (KiCad official)
- Symbol:
X9318WS8Z - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
x9318ws8z-etched.step/x9318ws8z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x9318ws8z.step/x9318ws8z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (10 pp, sha256
0085cba61f75fd2c, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# X9318WS8Z
**RENESAS** · Digital Potentiometers · SOIC-8
X9318WS8Z from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INC | input | Increment input: toggling INC while CS is low moves the wiper up or down; the INC input is negative-edge triggered, and CS and INC must be high before or with VCC at power-up to prevent unwanted tap changes. |
| 2 | U/D | input | Up/Down input controls the direction of wiper movement and whether the counter increments or decrements. |
| 3 | RH | passive | High terminal, equivalent to one of the fixed terminals of a mechanical potentiometer, rated 0 to 8 V with VSS = 0 V and an absolute maximum of +10 V to ground. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | RW | passive | Wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with typical wiper series resistance of 40 Ω and a wiper current limit of ±3.0 mA. |
| 6 | RL | passive | Low terminal, equivalent to one of the fixed terminals of a mechanical potentiometer, rated 0 to 8 V with VSS = 0 V and an absolute maximum of +10 V to ground. |
| 7 | CS | input | Chip select: the device is selected when CS is LOW and de-selected when CS is HIGH; the wiper position is stored to nonvolatile memory when CS returns HIGH while INC is HIGH. |
| 8 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V (5 V ± 10%), with absolute maximum of -1 V to +7 V relative to VSS. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| End to end resistance tolerance | | -20 | | 20 | % | See ordering information for values | 3 |
| RTOTAL temperature coefficient | | -300 | | 300 | ppm/°C | | 3 |
| Ratiometric temperature coefficient | | -20 | | 20 | ppm/°C | | 3 |
| RH/RL terminal voltage | VRH/RL | | | 8 | V | VSS = 0V | 3 |
| Power rating | | | | 25 | mW | | 3 |
| Wiper resistance | RW | | 40 | 200 | Ω | IW = 1mA | 3 |
| Wiper current | IW | -3 | | 3 | mA | See test circuit | 3 |
| Noise | | | | -120 | dBV | Ref: 1kHz | 3 |
| Absolute linearity | | -1 | | 1 | MI | V(RH) = 8V, V(RL) = 0V | 3 |
| Relative linearity | | -0.2 | | 0.2 | MI | | 3 |
| Potentiometer capacitance CH | CH | | 10 | | pF | See equivalent circuit | 3 |
| Potentiometer capacitance CL | CL | | 10 | | pF | See equivalent circuit | 3 |
| Potentiometer capacitance CW | CW | | 25 | | pF | See equivalent circuit | 3 |
| End to end resistance (RTOTAL nominal, 8 Ld SOIC W grade) | RTOTAL | | 10 | | k | Ordering information, 8 Ld SOIC (150 mil) | 2 |
| VCC Supply Voltage | VCC | 4.5 | | 5.5 | V | | 3 |
| VCC active current (Increment) | ICC | | 1 | 3 | mA | CS = VIL, U/D = VIL or VIH, INC = 0.4V/2.4V @ min. tCYC; RL, RH, RW not connected | 4 |
| Standby supply current | ISB | | 300 | 1000 | µA | CS ≥ 2.4V, U/D and INC = 0.4V; RL, RH, RW not connected | 4 |
| CS, INC, U/D input leakage current | ILI | -10 | | 10 | µA | VIN = VSS to VCC | 4 |
| CS, INC, U/D input HIGH voltage | VIH | 2 | | | V | | 4 |
| CS, INC, U/D input LOW voltage | VIL | -1 | | 0.8 | V | | 4 |
| CS, INC, U/D input capacitance | CIN | | | 10 | pF | VCC = 5V, VIN = VSS, TA = 25°C, f = 1MHz | 4 |
| Minimum endurance | | 100000 | | | Data changes per bit | | 4 |
| Data retention | | 100 | | | Years | | 4 |
| CS to INC setup | tCl | 100 | | | ns | | 5 |
| INC HIGH to U/D change | tID | 100 | | | ns | | 5 |
| U/D to INC setup | tDI | 1 | | | µs | | 5 |
| INC LOW period | tIL | 1 | | | µs | | 5 |
| INC HIGH period | tIH | 1 | | | µs | | 5 |
| INC inactive to CS inactive | tIC | 1 | | | µs | | 5 |
| CS deselect time (STORE) | tCPHS | 20 | | | ms | | 5 |
| CS deselect time (NO STORE) | tCPHNS | 1 | | | µs | | 5 |
| INC to RW change | tIW | 100 | | 500 | µs | | 5 |
| INC cycle time | tCYC | 4 | | | µs | | 5 |
| INC input rise and fall time | tR, tF | | | 500 | µs | | 5 |
| Power-up to wiper stable | tPU | | | 500 | µs | | 5 |
| VCC power-up rate | tR VCC | 0.2 | | 50 | V/ms | | 5 |
| Junction temperature under bias | | -65 | | 135 | °C | | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| Voltage on CS, INC, U/D and VCC with respect to VSS | | -1 | | 7 | V | | 3 |
| Voltage on RH, RW, RL to ground | | | | 10 | V | | 3 |
| Lead temperature (soldering 10s) | | | | 300 | °C | Soldering 10s | 3 |
| Wiper current IW (10s) | IW | -6 | | 6 | mA | 10s | 3 |
| Operating temperature range (W grade) | | 0 | | 70 | °C | Ordering information for this W grade, 8 Ld SOIC (150 mil) | 2 |
## CAD (KiCad official)
- Symbol: `X9318WS8Z`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `x9318ws8z-etched.step` / `x9318ws8z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `x9318ws8z.step` / `x9318ws8z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/x9318ws8z-datasheet.pdf) (10 pp, sha256 `0085cba61f75fd2c`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/x9318ws8z-datasheet.pdf)