Generated by kicad-footprint-generator · KiCad file format 20260206
X9315WSZ
RENESAS · Digital Potentiometers · SOIC-8
X9315WSZ from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INC | input | Increment control input, negative-edge triggered; each HIGH-to-LOW transition moves the wiper one tap in the direction set by U/D. |
| 2 | U/D | input | Up/Down control input that sets the wiper movement direction and whether the counter increments or decrements. |
| 3 | RH/VH | passive | High terminal of the resistor array, equivalent to a fixed end of a mechanical potentiometer, with voltage between VSS and VCC. |
| 4 | VSS | power_in | Ground. |
| 5 | RW/VW | passive | Wiper terminal, equivalent to the movable terminal of a mechanical potentiometer, with typical series resistance of 200 ohms at VCC = 5V. |
| 6 | RL/VL | passive | Low terminal of the resistor array, equivalent to a fixed end of a mechanical potentiometer, with voltage between VSS and VCC. |
| 7 | CS | input | Chip Select input, device is selected when LOW; wiper position is stored to nonvolatile memory when CS returns HIGH while INC is HIGH. |
| 8 | VCC | power_in | Supply voltage, 5V ±10% for X9315 (4.5V to 5.5V) and must always be at or above VH, VL and VW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| End to end resistance tolerance | -20 | 20 | % | 6 | |||
| Total resistance (X9315W) | RTOTAL | 10 | kΩ | 10k option per ordering table | 2 | ||
| VH terminal voltage | VVH | 0 | 5.5 | V | 0 to VCC (VCC max 5.5V) | 6 | |
| VL terminal voltage | VVL | 0 | 5.5 | V | 0 to VCC (VCC max 5.5V) | 6 | |
| Wiper resistance | RW | 200 | 400 | Ω | IW = [V(RH) - V(RL)]/ RTOTAL, VCC = 5V | 6 | |
| Absolute linearity | -1 | 1 | MI | Vw(n)(actual) - Vw(n)(expected) | 6 | ||
| Relative linearity | -0.2 | 0.2 | MI | Vw(n + 1) - [Vw(n) + MI] | 6 | ||
| RTOTAL temperature coefficient | -300 | 300 | ppm/°C | 6 | |||
| Ratiometric temperature coefficient | -20 | 20 | ppm/°C | 6 | |||
| Supply voltage | VCC | 4.5 | 5.5 | V | X9315 | 7 | |
| VCC active current (Increment) | ICC1 | 80 | µA | CS = VIL, U/D = VIL or VIH and INC = 0.4V @ max. tCYC | 7 | ||
| VCC active current (Store) | ICC2 | 400 | µA | CS = VIH, U/D = VIL or VIH and INC = VIH @ max. tWR | 7 | ||
| Standby supply current | ISB | 5 | µA | CS = VCC - 0.3V, U/D and INC = VSS or VCC - 0.3V | 7 | ||
| CS, INC, U/D input leakage current | ILI | -10 | 10 | µA | VIN = VSS to VCC | 7 | |
| CS, INC, U/D input HIGH voltage | VIH | 0.7 | 0.5 | V | Printed as VCC x 0.7 min and VCC + 0.5 max | 7 | |
| CS, INC, U/D input LOW voltage | VIL | -0.5 | 0.1 | V | Printed as -0.5 min and VCC x 0.1 max | 7 | |
| CS, INC, U/D input capacitance | CIN | 10 | pF | VCC = 5V, VIN = VSS, TA = +25°C, f = 1MHz | 7 | ||
| CS to INC setup | tCI | 100 | ns | 7 | |||
| INC HIGH to U/D change | tID | 100 | ns | 7 | |||
| U/D to INC setup | tDI | 2.9 | µs | 7 | |||
| INC LOW period | tIL | 1 | µs | 7 | |||
| INC HIGH period | tIH | 1 | µs | 7 | |||
| INC Inactive to CS inactive | tIC | 1 | µs | 8 | |||
| CS Deselect time (NO STORE) | tCPH | 100 | ns | NO STORE | 8 | ||
| CS Deselect time (STORE) | tCPH | 10 | ms | STORE | 8 | ||
| INC to Vw change | tIW | 1 | 5 | µs | 8 | ||
| INC cycle time | tCYC | 4 | µs | 8 | |||
| INC input rise and fall time | tR, tF | 500 | µs | Not 100% tested | 8 | ||
| Power-up to wiper stable | tPU | 5 | µs | Not 100% tested | 8 | ||
| VCC power-up rate | tR VCC | 0.2 | 50 | V/ms | Not 100% tested | 8 | |
| Store cycle | tWR | 5 | 10 | ms | 8 | ||
| Temperature under bias | -65 | 135 | °C | 6 | |||
| Storage temperature | -65 | 150 | °C | 6 | |||
| Voltage on CS, INC, U/D, VH, VL and VCC with respect to VSS | -1 | 7 | V | 6 | |||
| Voltage difference VH to VL | V = /VH-VL/ | 5 | V | 6 | |||
| Wiper current | IW | -7.5 | 7.5 | mA | 10 seconds | 6 | |
| Operating temperature (Commercial) | 0 | 70 | °C | 6 | |||
| Max wiper current | IW | -3.75 | 3.75 | mA | 6 | ||
| Max power rating | 10 | mW | 6 | ||||
| Thermal resistance junction to ambient, 8 Ld SOIC | θJA | 105 | °C/W | Typical | 6 | ||
| Thermal resistance junction to case, 8 Ld SOIC | θJC | 68 | °C/W | Typical | 6 | ||
| Noise | -120 | dBV | Ref: 1kHz | 6 | |||
| Potentiometer capacitances CH/CL/CW | CH/CL/CW | 25 | pF | See circuit #3 on page 7 (printed 10/10/25) | 6 |
CAD (KiCad official)
- Symbol:
X9315WSZ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
x9315wsz-etched.step/x9315wsz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x9315wsz.step/x9315wsz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (16 pp, sha256
27cd7f1ba0ca5228, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).