Generated by kicad-footprint-generator · KiCad file format 20260206
X3S026000B71HZ-NCHPR
HELE(Harmony Elec) · Crystals · SMD3225-4P
X3S026000B71HZ-NCHPR from HELE(Harmony Elec), in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XTAL1 | passive | Crystal terminal (chamfered pad marking pin 1) of the 26.000 MHz fundamental-mode crystal, 7.9 pF load capacitance, 34 ohm max ESR. |
| 2 | NC | unconnected | Fourth-corner solder pad; the datasheet does not state a function for it, so it is treated as not connected internally. |
| 3 | XTAL2 | passive | Second crystal terminal of the 26.000 MHz fundamental-mode crystal, diagonally opposite pin 1. |
| 4 | NC | unconnected | Corner solder pad; the datasheet does not state a function for it, so it is treated as not connected internally. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HELE(Harmony Elec) |
| Package | SMD3225-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Equivalent resistance | 34 | ohms | Series, max | 3 | |||
| Load capacitance (CL) tolerance | CL | -0.2 | 0.2 | pF | 3 | ||
| Frequency tolerance | -10 | 10 | ppm | at 25 deg.C +/-3 deg.C | 3 | ||
| Temperature drift | -10 | 10 | ppm | -20 deg.C to +75 deg.C | 3 | ||
| Insulation resistance | 500 | M ohms | at DC 100V | 3 | |||
| Aging | -1 | 1 | ppm/Year | Less than +/-1ppm/Year | 3 | ||
| Shunt capacitance tolerance | C0 | -15 | 15 | % | 3 | ||
| Motional capacitance C1 tolerance | C1 | -15 | 15 | % | 3 | ||
| Drive level tolerance | -10 | 10 | μW | 3 | |||
| Shock frequency variation | -5 | 5 | ppm | Dropping from 50 cm height 3 times on firm wood | 3 | ||
| Shock resistance variation | -15 | 15 | % | Dropping from 50 cm height 3 times on firm wood | 3 | ||
| Shock resistance maximum | 2 | ohms | Dropping from 50 cm height 3 times on firm wood | 3 | |||
| Operable temperature range | -20 | 75 | deg.C | 3 | |||
| Storage temperature range | -40 | 85 | deg.C | 3 | |||
| TS (temperature sensitivity) | TS | 27.5 | ppm/pF | Printed as '>27.5 ppm/pF' | 3 | ||
| Reflow peak temperature | 260 | deg.C | Peak, 10 sec max; reflow up to 2 times | 10 | |||
| Frequency | 26 | MHz | Nominal frequency | 3 | |||
| Load capacitance (CL) | CL | 7.9 | pF | 3 | |||
| Shunt capacitance | C0 | 1.5 | pF | 3 | |||
| Motional capacitance | C1 | 4.92 | fF | 3 | |||
| Drive level | 100 | μW | 3 | ||||
| Shunt capacitance C0 (test data limit) | C0 | 1.3 | 1.7 | pF | 15 | ||
| Motional capacitance C1 (test data limit) | C1 | 4.18 | 5.66 | fF | 15 | ||
| TS (test data low limit) | TS | 27 | ppm/pF | 15 |
CAD (KiCad official)
- Symbol:
X3S026000B71HZ-NCHPR - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
x3s026000b71hz-nchpr-etched.step/x3s026000b71hz-nchpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x3s026000b71hz-nchpr.step/x3s026000b71hz-nchpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HELE(Harmony Elec) datasheet (19 pp, sha256
bab3130f4617197c, retrieved 2026-10-25, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).