Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

X1G0056010296

Seiko Epson · Programmable Oscillators · SMD2520-4P

X1G0056010296 from Seiko Epson, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE / ST input Pin 1 is shared: with the OE function, high gives the specified frequency output from OUT and low forces OUT low with a weak pull-down while disabling only the output driver; with the Standby (ST) function, high gives the specified output and low places the device in standby with supply current reduced to I_std.
2 GND power_in Ground pin; the datasheet recommends a 0.1 µF capacitor between VCC and GND placed close to the device for optimum jitter.
3 OUT output CMOS clock output at the specified frequency range of 0.67 MHz to 170 MHz when enabled.
4 VCC power_in Power supply pin with a rated supply range of 1.62 V to 3.63 V.

Key specifications

Parameter Value
Manufacturer Seiko Epson
Package SMD2520-4P
Category Crystals, Oscillators, Resonators
Pins 4

CAD (KiCad official)

  • Symbol: X1G0056010296
  • Footprint: Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm
  • 3D model: SMD2520-4P (KiCad packages3D, STEP)
  • 3D model files: x1g0056010296-etched.step / x1g0056010296-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); x1g0056010296.step / x1g0056010296.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Seiko Epson datasheet (8 pp, sha256 d3e233d485833aa0, retrieved 2026-10-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF