main
Ray
Publish 0.1.0
a307f5e
X1G0048010067
Seiko Epson · Oscillators · SMD2016-4P
X1G0048010067 from Seiko Epson, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ST | input | Standby/output-enable input: H or OPEN gives oscillation at the specified frequency with the output enabled, L stops oscillation and puts OUT in high impedance; VIH is at least 80 % Vcc and VIL is at most 20 % Vcc, and the ST voltage must not exceed the supply voltage. |
| 2 | GND | power_in | Ground terminal, with 0 V as the specified GND in the operating range; a 0.01 µF to 0.1 µF bypass capacitor should be placed between VCC and GND as close to the VCC pin as possible. |
| 3 | OUT | output | CMOS output terminal driving a 15 pF maximum load (L_CMOS), with VOH at least 90 % Vcc at Ioh = -4 mA and VOL at most 10 % Vcc at Iol = 4 mA at Vcc = 3.3 V. |
| 4 | VCC | power_in | Supply terminal, specified from 1.60 V to 3.63 V, with a 0.01 µF to 0.1 µF bypass capacitor placed as close to this pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD2016-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency tolerance | f_tol | -50 | 50 | ×10-6 | T_use = -40 °C to +85 °C | 8 | |
| Frequency aging | f_age | -3 | 3 | ×10-6 | T_use = +25 °C, First year | 8 | |
| Supply voltage | VCC | 1.6 | 3.63 | V | 8 | ||
| Operating temperature range | T_use | -40 | 25 | 85 | °C | 8 | |
| CMOS load condition | L_CMOS | 15 | pF | 8 | |||
| Power supply startup time (0 %VCC → 90 %VCC) | 150 | μs | Note: should be more than 150 μs | 8 | |||
| Start-up time | t_str | 3 | ms | t = 0 at 90 %VCC | 9 | ||
| Stand-by current | I_std | 2.1 | µA | VCC = 1.8 V ± 10 % or ± 5 %, S̅T̅= GND | 9 | ||
| Stand-by current | I_std | 2.5 | µA | VCC = 2.5 V ± 10 %, S̅T̅= GND | 9 | ||
| Stand-by current | I_std | 2.7 | µA | VCC = 3.3 V ± 10 %, S̅T̅= GND | 9 | ||
| Current consumption (No load) | ICC | 1.8 | mA | VCC = 1.8 V, 20 MHz < fo ≤ 40 MHz | 9 | ||
| Current consumption (No load) | ICC | 2 | mA | VCC = 2.5 V, 20 MHz < fo ≤ 40 MHz | 9 | ||
| Current consumption (No load) | ICC | 2.2 | mA | VCC = 3.3 V, 20 MHz < fo ≤ 40 MHz | 9 | ||
| Output high voltage | VOH | 90 | % VCC | 9 | |||
| Output low voltage | VOL | 10 | % VCC | 9 | |||
| Output low voltage | VOL | 0.4 | V | 9 | |||
| Symmetry | SYM | 45 | 50 | 55 | % | 50 % VCC level, L_CMOS ≤ 15 pF | 9 |
| Rise time / Fall time | tr / tf | 3 | ns | VCC = 2.5 V or 3.3 V ± 10 %, 20 % VCC to 80 % VCC, L_CMOS = 15 pF | 9 | ||
| Rise time / Fall time | tr / tf | 3.5 | ns | VCC = 1.8 V ± 10 % or ± 5 %, 20 % VCC to 80 % VCC, L_CMOS = 15 pF | 9 | ||
| Input high voltage (ST terminal) | VIH | 80 | % Vcc | S̅T̅ terminal | 9 | ||
| Input low voltage (ST terminal) | VIL | 20 | % Vcc | S̅T̅ terminal | 9 | ||
| Output disable time (ST) | tstp_st | 100 | ns | S̅T̅ terminal HIGH → LOW | 9 | ||
| Output enable time (ST) | tsta_st | 3 | ms | S̅T̅ terminal LOW → HIGH | 9 | ||
| Maximum supply voltage | VCC | -0.3 | 4 | V | 8 | ||
| Input voltage | Vin | -0.3 | V | S̅T̅ terminal | 8 | ||
| Storage temperature range | T_stg | -55 | 125 | °C | SG2016CAN | 8 | |
| Junction temperature | Tj | 125 | °C | 9 | |||
| Junction to case | θjc | 9.8 | °C/W | For reference only; SG2016CAN | 9 | ||
| Junction to ambient | θja | 99.6 | °C/W | For reference only; SG2016CAN | 9 | ||
| Output frequency | fo | 40 | MHz | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | Terminal coating : Au plating Frequency tolerance / | 23 |
CAD (KiCad official)
- Symbol:
X1G0048010067 - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
x1g0048010067-etched.step/x1g0048010067-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x1g0048010067.step/x1g0048010067.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Seiko Epson datasheet (35 pp, sha256
8189e3f68a2a7e7b, retrieved 2026-10-25, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# X1G0048010067
**Seiko Epson** · Oscillators · SMD2016-4P
X1G0048010067 from Seiko Epson, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ST | input | Standby/output-enable input: H or OPEN gives oscillation at the specified frequency with the output enabled, L stops oscillation and puts OUT in high impedance; VIH is at least 80 % Vcc and VIL is at most 20 % Vcc, and the ST voltage must not exceed the supply voltage. |
| 2 | GND | power_in | Ground terminal, with 0 V as the specified GND in the operating range; a 0.01 µF to 0.1 µF bypass capacitor should be placed between VCC and GND as close to the VCC pin as possible. |
| 3 | OUT | output | CMOS output terminal driving a 15 pF maximum load (L_CMOS), with VOH at least 90 % Vcc at Ioh = -4 mA and VOL at most 10 % Vcc at Iol = 4 mA at Vcc = 3.3 V. |
| 4 | VCC | power_in | Supply terminal, specified from 1.60 V to 3.63 V, with a 0.01 µF to 0.1 µF bypass capacitor placed as close to this pin as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Seiko Epson |
| Package | SMD2016-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency tolerance | f_tol | -50 | | 50 | ×10-6 | T_use = -40 °C to +85 °C | 8 |
| Frequency aging | f_age | -3 | | 3 | ×10-6 | T_use = +25 °C, First year | 8 |
| Supply voltage | VCC | 1.6 | | 3.63 | V | | 8 |
| Operating temperature range | T_use | -40 | 25 | 85 | °C | | 8 |
| CMOS load condition | L_CMOS | | | 15 | pF | | 8 |
| Power supply startup time (0 %VCC → 90 %VCC) | | 150 | | | μs | Note: should be more than 150 μs | 8 |
| Start-up time | t_str | | | 3 | ms | t = 0 at 90 %VCC | 9 |
| Stand-by current | I_std | | | 2.1 | µA | VCC = 1.8 V ± 10 % or ± 5 %, S̅T̅= GND | 9 |
| Stand-by current | I_std | | | 2.5 | µA | VCC = 2.5 V ± 10 %, S̅T̅= GND | 9 |
| Stand-by current | I_std | | | 2.7 | µA | VCC = 3.3 V ± 10 %, S̅T̅= GND | 9 |
| Current consumption (No load) | ICC | | | 1.8 | mA | VCC = 1.8 V, 20 MHz < fo ≤ 40 MHz | 9 |
| Current consumption (No load) | ICC | | | 2 | mA | VCC = 2.5 V, 20 MHz < fo ≤ 40 MHz | 9 |
| Current consumption (No load) | ICC | | | 2.2 | mA | VCC = 3.3 V, 20 MHz < fo ≤ 40 MHz | 9 |
| Output high voltage | VOH | 90 | | | % VCC | | 9 |
| Output low voltage | VOL | | | 10 | % VCC | | 9 |
| Output low voltage | VOL | | | 0.4 | V | | 9 |
| Symmetry | SYM | 45 | 50 | 55 | % | 50 % VCC level, L_CMOS ≤ 15 pF | 9 |
| Rise time / Fall time | tr / tf | | | 3 | ns | VCC = 2.5 V or 3.3 V ± 10 %, 20 % VCC to 80 % VCC, L_CMOS = 15 pF | 9 |
| Rise time / Fall time | tr / tf | | | 3.5 | ns | VCC = 1.8 V ± 10 % or ± 5 %, 20 % VCC to 80 % VCC, L_CMOS = 15 pF | 9 |
| Input high voltage (ST terminal) | VIH | 80 | | | % Vcc | S̅T̅ terminal | 9 |
| Input low voltage (ST terminal) | VIL | | | 20 | % Vcc | S̅T̅ terminal | 9 |
| Output disable time (ST) | tstp_st | | | 100 | ns | S̅T̅ terminal HIGH → LOW | 9 |
| Output enable time (ST) | tsta_st | | | 3 | ms | S̅T̅ terminal LOW → HIGH | 9 |
| Maximum supply voltage | VCC | -0.3 | | 4 | V | | 8 |
| Input voltage | Vin | -0.3 | | | V | S̅T̅ terminal | 8 |
| Storage temperature range | T_stg | -55 | | 125 | °C | SG2016CAN | 8 |
| Junction temperature | Tj | | | 125 | °C | | 9 |
| Junction to case | θjc | | 9.8 | | °C/W | For reference only; SG2016CAN | 9 |
| Junction to ambient | θja | | 99.6 | | °C/W | For reference only; SG2016CAN | 9 |
| Output frequency | fo | | 40 | | MHz | | 1 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | gold | Terminal coating : Au plating Frequency tolerance / | 23 |
## CAD (KiCad official)
- Symbol: `X1G0048010067`
- Footprint: `Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm`
- 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files: `x1g0048010067-etched.step` / `x1g0048010067-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `x1g0048010067.step` / `x1g0048010067.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Seiko Epson datasheet](docs/x1g0048010067-datasheet.pdf) (35 pp, sha256 `8189e3f68a2a7e7b`, retrieved 2026-10-25, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/x1g0048010067-datasheet.pdf)