main
History Download
Ray Publish 0.1.0 25df497

X1G0041310042

Seiko Epson · Temperature Compensated Crystal Oscillators (TCXO) · SMD2016-4P

X1G0041310042 from Seiko Epson, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N.C. unconnected The N.C. pin must not be connected to any other lead, including other N.C. pins.
2 GND power_in GND is the 0 V ground reference pin and must be connected to a low-impedance ground.
3 OUT output OUT delivers a clipped sine wave of 0.8 V to 1.5 V peak-to-peak into 10 kOhm // 10 pF and requires an external DC-cut capacitor of at least 0.01 uF.
4 Vcc power_in Vcc is the supply pin, operating from 2.85 V to 3.15 V with 3 V typical and an absolute maximum Vcc-GND of +4.0 V, and needs a 0.01 to 0.1 uF by-pass capacitor placed close to the pin.

Key specifications

Parameter Value
Manufacturer Seiko Epson
Package SMD2016-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage Vcc-GND -0.3 4 V 2
Storage temperature range T_stg -40 90 °C Storage as single product 2
Vcc Vcc 2.85 3 3.15 V 2
GND GND 0 0 V 2
Operating temperature range T_use -30 85 °C 2
Load resistance Load_R 9 10 11 kΩ 2
Load capacitance Load_C 9 10 11 pF DC cut capacitor=0.01µF 2
DC-cut capacitor Cc 0.01 μF DC-cut capacitor * 2
Frequency tolerance before reflow f_tol -0.8 0.8 x10⁻⁶ T_use=+25°C+/-2°C, before reflow 2
Frequency tolerance after 2 reflows f_tol -2 2 x10⁻⁶ T_use=+25°C+/-2°C, after 2 reflows 2
Frequency / temperature characteristics fo-Tc -2 2 x10⁻⁶ T_use = -30 ºC to +85 ºC 2
Frequency / load coefficient fo-Load -0.2 0.2 x10⁻⁶ 10 kΩ // 10 pF +/- 10% 2
Frequency / voltage coefficient fo-Vcc -0.2 0.2 x10⁻⁶ Vcc +/- 5 % 2
Frequency aging f_age -1 1 x10⁻⁶ 1st year, T_use=25degC 2
Current consumption Icc 2 mA T_Use = +25ºC , 10 kΩ//10pF 3
Output level Vp-p 0.8 1.5 V Peak to peak 10 kΩ//10pF +/- 10% 3
Symmetry SYM 40 60 % GND Level 3
Start up time t_sta 2 ms Within 90% of final amp. 3
Start up time (frequency deviation) t_sta 2 ms ΔF = +/- 1.0 x 10-6 3
Harmonics -8 dBc - 3
Phase noise at 10Hz offset L(f) -82 dBc/Hz 10Hz offset 3
Phase noise at 100Hz offset L(f) -108 dBc/Hz 100Hz offset 3
Phase noise at 1kHz offset L(f) -130 dBc/Hz 1kHz offset 3
Phase noise at 10kHz offset L(f) -145 dBc/Hz 10kHz offset 3
Phase noise at 100kHz offset L(f) -148 dBc/Hz 100kHz offset 3
Phase noise at 1MHz offset L(f) -148 dBc/Hz 1MHz offset 3
Output frequency fo 32 MHz Vcc=3 V, GND=0.0 V, Load=10 kΩ // 10 pF, T_use=+25°C 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts gold Au plated nickel(Electric terminal) Fe-Ni-Co(Lid) 5

CAD (KiCad official)

  • Symbol: X1G0041310042
  • Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
  • 3D model: SMD2016-4P (KiCad packages3D, STEP)
  • 3D model files: x1g0041310042-etched.step / x1g0041310042-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); x1g0041310042.step / x1g0041310042.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Seiko Epson datasheet (8 pp, sha256 aef671a9f25ab14f, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF