3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownX11T
Hichips · LED Drivers · TO-252-4
X11T from Hichips, in a TO-252-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IOUT | output | Constant-current driver pin for the LED string, with the datasheet giving a withstand voltage of -0.3 to 46 V for the constant-current output ports. |
| 2 | VDD | power_in | Supply pin that must be bypassed with at least 1.0 uF placed close to the pin, with VCC absolute maximum of -0.3 to 6.0 V and internal clamp voltage of about 5.2 V. |
| 3 | GND | power_in | Chip ground that is the package base (exposed pad), and the datasheet advises using copper on the PCB under it for heat dissipation. |
| 4 | DIM | input | PWM dimming input where a high level enables normal operation and a low level turns the output off, responding to pulses as short as 60 ns, with an internal 100 uA pull-up and absolute maximum of -0.3 to 6.0 V. |
| 5 | REXT | passive | Output current setting pin where the constant current is programmed by an external resistor, with absolute maximum of -0.3 to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Hichips |
| Package | TO-252-4 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC chip operating supply voltage | VCC | -0.3 | 6 | V | 3 | ||
| VIOUT1~3 constant-current output port withstand voltage | VIOUT1~3 | -0.3 | 46 | V | 3 | ||
| VPWM PWM input voltage | VPWM | -0.3 | 6 | V | 3 | ||
| VREXT REXT port withstand voltage | VREXT | -0.3 | 6 | V | 3 | ||
| Storage temperature | TSTG | -40 | 150 | ℃ | 3 | ||
| Operating temperature | TA | -40 | 125 | ℃ | 3 | ||
| ESD human body model (HBM) | HBM | 2 | KV | Human body discharge model; datasheet prints '>2 KV' | 3 | ||
| Output current | IOUT | 20 | 1050 | mA | 4 | ||
| VCC clamp current | IDDclamp | 25 | mA | 4 | |||
| PWM minimum response time | T_min | 60 | ns | PWM minimum response time as printed | 4 | ||
| Constant-current knee voltage at IOUT=1A | V_IOUT | 1.15 | V | IOUT=1A | 4 | ||
| Constant-current knee voltage at IOUT=750mA | V_IOUT | 1 | V | IOUT=750mA | 4 | ||
| Constant-current knee voltage at IOUT=500mA | V_IOUT | 0.7 | V | IOUT=500mA | 4 |
CAD (KiCad official)
- Symbol:
X11T - Footprint:
Package_TO_SOT_SMD:TO-252-4 - 3D model: TO-252-4 (KiCad packages3D, STEP)
- 3D model files:
x11t-etched.step/x11t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);x11t.step/x11t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Hichips datasheet (7 pp, sha256
0cffc172a32597a5, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).