component
WS8300F5ES16
Public Made by Adomby adom
wisesun Microcontrollers (MCU/MPU/SOC), SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWS8300F5ES16
wisesun · Microcontrollers (MCU/MPU/SOC) · SOP-16
WS8300F5ES16 from wisesun, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MICBIAS | passive | Audio interface pin for the integrated Amic; the datasheet gives no voltage or current limits for it. |
| 2 | XO16M | passive | 16MHz/32MHz high-speed crystal oscillator output. |
| 3 | XI16M | passive | 16MHz/32MHz high-speed crystal oscillator input. |
| 4 | RF | passive | RF signal input/output pin. |
| 5 | GND | power_in | Ground; the datasheet describes this as the chip package back-side GND. |
| 6 | PD2 | bidirectional | General-purpose digital I/O (GPIO). |
| 7 | PD3 | bidirectional | General-purpose digital I/O (GPIO). |
| 8 | PC0 | bidirectional | Analog and digital I/O (GPIO). |
| 9 | PC1 | bidirectional | Analog and digital I/O (GPIO). |
| 10 | VDD33_IO | power_in | I/O supply input, 2.3 V to 3.6 V. |
| 11 | VDD12 | power_out | Internal 1.2 V supply output; connect an external 1 uF decoupling capacitor. |
| 12 | PB3 | bidirectional | General-purpose digital I/O (GPIO); defaults to JLINK TCK. |
| 13 | PB4 | bidirectional | General-purpose digital I/O (GPIO); defaults to JLINK TMS. |
| 14 | PB5 | bidirectional | General-purpose digital I/O (GPIO). |
| 15 | PB6 | bidirectional | Analog and digital I/O (GPIO). |
| 16 | PA2 | bidirectional | Analog and digital I/O (GPIO); also serves as the IrDA transmit/receive I/O. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | wisesun |
| Package | SOP-16 |
| Category | Embedded Processors & Controllers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 (VDD) | VDD | 2.3 | 3.3 | 3.6 | V | 6 | |
| 工作温度 (TA) | TA | -40 | 105 | ℃ | 6 | ||
| 稳态电源电压 (VDD) | VDD | -0.3 | 3.6 | V | 6 | ||
| 工作温度 (Tamb) | Tamb | -40 | 105 | ℃ | 6 | ||
| 储藏温度 (Tstg) | Tstg | -40 | 150 | ℃ | 6 | ||
| 地 (Ground) | Ground | -0.3 | 0.3 | V | 6 | ||
| 拉电流 (IOH) | IOH | 20 | mA | 6 | |||
| 灌电流 (IOL) | IOL | 15 | mA | 6 | |||
| 数字输出低电平 (VOL) | VOL | 0.4 | V | 6 | |||
| 锂电池供电输入电压 (VBATIN) | VBATIN | 2.5 | 4.2 | 5 | V | 7 | |
| 锂电池供电内部输出电压 (VBATOUT) | VBATOUT | 2.5 | 3 | 3 | V | 7 | |
| 工作频率 (FOP) | FOP | 2400 | 2480 | MHz | 8 | ||
| 发送功率 (Pout) | Pout | -15 | 5 | 10 | dBm | 8 | |
| 频率偏差 (△f1M, 2.4G) | △f1M | 160 | 250 | kHz | 2.4G, Frequency deviation(1Mbps) | 8 | |
| 高速晶振频率 (16/32M) | 16 | 32 | MHz | 9 | |||
| 高速晶振频率精度 | -30 | 30 | ppm | @-40 to +85℃ | 9 | ||
| 高速晶振温度范围 | -40 | 105 | degree | 9 | |||
| 高速晶振负载电容 (Cload) | Cload | 8 | 15 | 20 | pF | 9 | |
| 高速晶振等效串联电阻 (ESR) | ESR | 85 | Ω | 9 |
CAD (KiCad official)
- Symbol:
WS8300F5ES16 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
ws8300f5es16-etched.step/ws8300f5es16-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ws8300f5es16.step/ws8300f5es16.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: wisesun datasheet (15 pp, sha256
53ac71a4ede43109, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).