component
WS726052M-8
Public Made by Adomby adom
WILLSEMI Will Semicon Operational Amplifier, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWS726052M-8
WILLSEMI Will Semicon · Operational Amplifier · MSOP-8
WS726052M-8 from WILLSEMI Will Semicon, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Output of Channel A, which the datasheet describes as rail-to-rail with 350 mA peak output drive capability. |
| 2 | -INA | input | Inverting input of Channel A. |
| 3 | +INA | input | Non-inverting input of Channel A; input common-mode range is (V-) - 0.1 V to (V+) + 0.1 V. |
| 4 | V- | power_in | Negative supply; operating supply range is 2.5 V to 5.5 V (V+ minus V-). |
| 5 | +INB | input | Non-inverting input of Channel B; input common-mode range is (V-) - 0.1 V to (V+) + 0.1 V. |
| 6 | -INB | input | Inverting input of Channel B. |
| 7 | OUTB | output | Output of Channel B, which the datasheet describes as rail-to-rail with 350 mA peak output drive capability. |
| 8 | V+ | power_in | Positive supply; operating supply range is 2.5 V to 5.5 V (V+ minus V-). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WILLSEMI Will Semicon |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 1 | 5 | μV | 3 | ||
| Common Mode Rejection Ratio | CMRR | 120 | 135 | dB | (V-) - 0.1V < VCM < (V+) + 0.1V | 3 | |
| Open-Loop Voltage Gain | AOL | 120 | 140 | dB | (V-) + 0.1V < VOUT < (V+) - 0.1V, Rload = 2kΩ | 3 | |
| Output Voltage Swing from Rail to V+ | VOH | 72 | 85 | mV | Rload = 150Ω | 3 | |
| Output Voltage Swing from Rail to V- | VOL | 112 | 125 | mV | Rload = 150Ω | 3 | |
| Output Short-Circuit Current to V+ | ISC+ | 315 | 342 | mA | 3 | ||
| Output Short-Circuit Current to V- | ISC- | 275 | 295 | mA | 3 | ||
| Specified Voltage Range | VS | 2.5 | 5.5 | V | 3 | ||
| Quiescent Current/Amplifier | IQ | 827 | 1300 | μA | IOUT = 0 | 3 | |
| Power Supply Rejection Ratio | PSRR | 120 | 135 | dB | V+ = 2.5V to 5.5V, VCM =V+/2V | 3 | |
| Supply Voltage (V+ - V-) | VS | 5.5 | V | 2 | |||
| Operating Supply Voltage Range | VIDR | 2.5 | 5.5 | V | 2 | ||
| Operating Free-Air Temperature Range | TA | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Junction Temperature Range | TJ | 150 | °C | 2 | |||
| Lead Temperature Range | TL | 260 | °C | 2 | |||
| ESD Human Body Model | HBM | -8000 | 8000 | V | MIL-STD-883H Method 3015.8 / JEDEC-EIA/JESD22-A114A | 2 | |
| ESD Machine Model | MM | -400 | 400 | V | JEDEC-EIA/JESD22-A115 | 2 | |
| ESD Charged Device Model | CDM | -2000 | 2000 | V | JEDEC-EIA/JESD22-C101E | 2 | |
| Gain-Bandwidth Product | 11.5 | MHz | G = +100, Cload = 20pF | 3 | |||
| Slew Rate | 6 | V/μs | G = +1, VOUT = 2VP-P | 3 | |||
| Input Voltage Noise | 0.8 | μVP-P | f = 0.1Hz to 10Hz | 3 | |||
| Input Voltage Noise Density | 40 | nV/√Hz | f = 1kHz | 3 | |||
| Input Voltage Noise Density | 8 | nV/√Hz | f = 10kHz | 3 |
CAD (KiCad official)
- Symbol:
WS726052M-8 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ws726052m-8-etched.step/ws726052m-8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ws726052m-8.step/ws726052m-8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WILLSEMI Will Semicon datasheet (10 pp, sha256
e4d992cf99de1fe7, retrieved 2026-10-15, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).