component
WS480X
Public Made by Adomby adom
wisesun RF Transceiver ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 6d ago |
| viewers | 6d ago |
| package.json | 6d ago |
| page.json | 6d ago |
| README.md | 6d ago |
| ws480x-etched.glb | 6d ago |
| ws480x-etched.step | 6d ago |
| ws480x-hero.glb | 6d ago |
| ws480x-hero.overlay.json | 6d ago |
| ws480x.glb | 6d ago |
| ws480x.kicad_mod | 6d ago |
| ws480x.kicad_sym | 6d ago |
| ws480x.lbr | 6d ago |
| ws480x.step | 6d ago |
WS480X
wisesun · RF Transceiver ICs · SOP-8
WS480X from wisesun, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin for the receiver IC. |
| 2 | ANT | input | RF signal input pin; saturation input level is -20 dBm with RSC = 50 Ω. |
| 3 | VDD | power_in | Supply pin with an operating range of DC 2.0 V to 5.5 V; absolute maximum is 5.5 V. |
| 4 | CTH | input | Selects the reference signal mode for the internal data comparator; CTH source impedance is 145 kΩ. |
| 5 | DO | output | Demodulated digital data signal output. |
| 6 | SHUT | input | Shutdown control: connect to VDD to shut down and to GND for normal operation; SHUT pin low to receive start time is 3 ms. |
| 7 | NC | unconnected | Not connected; leave floating. |
| 8 | REFOSC | input | External crystal connection; the pin can also be driven by an external reference clock through a coupling capacitor with a peak-to-peak amplitude of 0.3 V to 0.7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | wisesun |
| Package | SOP-8 |
| Category | Radio Frequency Chip/Antenna |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2 | 3.3 | 5.5 | V | 3 | |
| Operating temperature | TA | -40 | 125 | ℃ | 3 | ||
| Supply voltage slope | θ | 1 | mV/μs | 3 | |||
| Supply voltage absolute maximum | VDD | -0.3 | 5.5 | V | 3 | ||
| Interface voltage | VIN | -0.3 | V | 3 | |||
| Junction temperature | TJ | -40 | 150 | ℃ | 3 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 3 | ||
| Soldering temperature | TSDR | 255 | ℃ | Held for at least 30 s | 3 | ||
| ESD HBM rating | VHBM | -8 | 8 | kV | Human body model (HBM) | 3 | |
| Supply voltage | VDD | 2 | 5.5 | V | 4 | ||
| Data rate | DR | 10 | kbps | 4 | |||
| Operating current | IOP | 3.4 | mA | fRF=315MHz,VDD=3.3V | 4 | ||
| Operating current | IOP | 3.47 | mA | fRF=315MHz,VDD=5V | 4 | ||
| Operating current | IOP | 3.76 | mA | fRF=433.92MHz,VDD=3.3V | 4 | ||
| Operating current | IOP | 3.87 | mA | fRF=433.92MHz,VDD=5V | 4 | ||
| Standby (sleep) current | ISTBY | 0.01 | µA | VSHUT=VDD | 4 | ||
| Receiver sensitivity | -114 | dBm | fRF = 315MHz / 2kbps | 4 | |||
| Receiver sensitivity | -115 | dBm | fRF = 433.92MHz / 2kbps | 4 | |||
| Receiver bandwidth | BW | 350 | kHz | fRF = 315MHz | 4 | ||
| IF frequency | fIF | 0.86 | MHz | 4 | |||
| IF bandwidth | fBW | 0.43 | MHz | 4 | |||
| Saturated input level | -20 | dBm | RSC = 50Ω | 4 | |||
| Reference oscillator input impedance | ZREFOSC | 290 | kΩ | 4 | |||
| Reference oscillator source current | 5.2 | µA | 4 | ||||
| CTH source impedance | ZCTH | 145 | kΩ | 4 | |||
| CTH leakage current | IZCTH(leak) | -100 | 100 | nA | TA = +85°C | 4 | |
| Receiver startup time | 4 | ms | From VDD power-up to reception | 4 | |||
| SHUT startup time | 3 | ms | From SHUT pin pulled low to reception | 4 | |||
| Load capacitance | CLOAD | 15 | pF | 5 | |||
| Crystal equivalent resistance | Rm | 60 | Ω | 5 | |||
| Crystal startup time | tXTAL | 400 | µs | 5 | |||
| Crystal frequency accuracy | -20 | 20 | ppm | Reference only; acceptable error limited by receiver bandwidth | 5 |
CAD (KiCad official)
- Symbol:
WS480X - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ws480x-etched.step/ws480x-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ws480x.step/ws480x.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: wisesun datasheet (6 pp, sha256
acd0ea37540c88db, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).