component
WS4054
Public Made by Adomby adom
WPMtek Wei Pan Microelectronics Battery Management, SOT-23-5L. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownWS4054
WPMtek Wei Pan Microelectronics · Battery Management · SOT-23-5L
WS4054 from WPMtek Wei Pan Microelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status indicator. Pulled low (LED on) during an active charge cycle; high-Z (LED off) when charging terminates, VDD is in UVLO, or VBAT > VDD. Blinks when VDD is valid, BAT is connected only to a ~2.2 uF capacitor and no battery is present. VCHRGL ≤ 100 mV at ICHRG = 5 mA. Tie to ground through a series LED + ~1 kΩ resistor from VIN, or leave unconnected if unused. |
| 2 | GND | power_in | Device ground reference. Connect to system ground with a low-impedance path; PROG resistor and input/output bypass capacitors return here. |
| 3 | BAT | power_out | Charge current output to the single-cell Li-ion battery. Regulates to VFLOAT = 4.200 V ±42 mV in constant-voltage mode. Sources programmed constant current (up to 500 mA) in CC mode and ~1/10 of the programmed current as trickle when VBAT < VTRKL (2.9 V). Recharge cycle restarts when VBAT falls ~150 mV below VFLOAT (≈ 4.05 V). Bypass with ~1-10 uF ceramic capacitor to GND. |
| 4 | VDD | power_in | Input supply from USB port or AC adapter. Recommended operating range 4.5 V-6.0 V (absolute max 9 V, but reverse-connected-battery operation should stay near 5 V and not exceed 6 V). UVLO threshold typ 3.7 V rising with 170 mV hysteresis; charger stays disabled until VDD > VBAT + 200 mV. Bypass with 1-10 uF ceramic capacitor to GND close to the pin. |
| 5 | PROG | passive | Charge-current program pin. Connect a resistor RPROG from PROG to GND to set the fast-charge current: IBAT ≈ 1000 / RPROG (A·Ω), e.g. 2 kΩ → 500 mA, 4 kΩ → 250 mA, 10 kΩ → 100 mA, 20 kΩ → 50 mA. Servos to VPROG2 ≈ 1.00 V in constant-current mode. Floating or open PROG puts the part into standby; termination is detected when the PROG voltage falls below 100 mV for TDELAY. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WPMtek Wei Pan Microelectronics |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
WS4054
CAD (KiCad official)
- Symbol:
WS4054 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
ws4054-etched.step/ws4054-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ws4054.step/ws4054.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WPMtek Wei Pan Microelectronics datasheet (8 pp, sha256
92880727123ac84b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).