WS3080

{
 "schema": "adom.pads/1",
 "slug": "ws3080",
 "footprint": "MSOP-8_3x3mm_P0.65mm",
 "generated_from": {
  "footprint": "MSOP-8_3x3mm_P0.65mm@sha256:c85207be7edf4b5e",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.1125,
   -0.975
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "MSOP-8_3x3mm_P0.65mm@sha256:c85207be7edf4b5e"
 },
 "pad_count": 8,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "RO",
   "type": "output",
   "description": "Receiver output. When receiver is enabled (RE low): if V(A)-V(B) > -50mV, RO outputs high; if V(A)-V(B) < -200mV, RO outputs low. High-impedance when receiver disabled.",
   "is_pin1": true,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "RE",
   "type": "input",
   "description": "Receiver output enable (active-low). When RE is low, RO is enabled. When RE is high, receiver is disabled. With RE high and DE low, the chip enters shutdown state.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "DE",
   "type": "input",
   "description": "Driver output enable (active-high). When DE is high, the driver outputs are enabled. When DE is low, the driver outputs go high-impedance. With RE high and DE low, the chip enters shutdown state.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "DI",
   "type": "input",
   "description": "Driver input. When DI is low, non-inverting output (A) is forced low and inverting output (B) is forced high. When DI is high, A is high and B is low.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference (0V).",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "A",
   "type": "bidirectional",
   "description": "RS-485/RS-422 bus interface pin. Driver non-inverting output and receiver non-inverting input. Bus voltage range -8V to +13V; ±15kV HBM ESD protection.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "B",
   "type": "bidirectional",
   "description": "RS-485/RS-422 bus interface pin. Driver inverting output and receiver inverting input. Bus voltage range -8V to +13V; ±15kV HBM ESD protection.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.1125,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.625,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive supply, 4.75V to 5.25V (typ 5V). Bypass with a 0.1µF ceramic capacitor to GND. Absolute maximum 7V.",
   "is_pin1": false,
   "source": {
    "geometry": "MSOP-8_3x3mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}