3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWS3077EEUA
GEC · RS-485 / RS-422 ICs · MSOP8
WS3077EEUA from GEC, in a MSOP8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vcc | power_in | Positive supply; bypass VCC to GND with a 0.1µF capacitor, with recommended supply of 3 V to 5.25 V (3.3/5 V nominal) and absolute maximum of 7 V. |
| 2 | RO | output | Receiver output, enabled when the receiver is on: RO goes high when V(A)-V(B) > -50 mV and low when V(A)-V(B) < -200 mV, and it goes high for open or shorted inputs (fail-safe). |
| 3 | DI | input | Driver input: DI low forces Y low and Z high, DI high forces Y high and Z low, with VIH of 2.0 V minimum and VIL of 0.8 V maximum, and a logic pin voltage range of -0.3 V to 7 V. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | Y | output | Bus interface, non-inverting driver output (bus-pin voltage range -8 V to 13 V). |
| 6 | Z | output | Bus interface, inverting driver output (bus-pin voltage range -8 V to 13 V). |
| 7 | B | input | Bus interface, inverting receiver input (bus-pin voltage range -8 V to 13 V). |
| 8 | A | input | Bus interface, non-inverting receiver input (bus-pin voltage range -8 V to 13 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GEC |
| Package | MSOP8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential driver output, RS-422 load (3.3V table) | VOD2 | 2 | V | Fig 1, R=50Ω (RS-422) | 2 | ||
| Differential driver output, RS-485 load (3.3V table) | VOD2 | 1.5 | 2 | V | Fig 1, R=27Ω (RS-485) | 2 | |
| Differential output amplitude change (3.3V table) | ΔVOD | 0.2 | V | Fig 1, R=50Ω or R=27Ω | 2 | ||
| Driver output common-mode voltage (3.3V table) | VOC | 3 | V | Fig 1, R=50Ω or R=27Ω | 2 | ||
| Driver output common-mode voltage change (3.3V table) | ΔVOC | 0.2 | V | Fig 1, R=50Ω or R=27Ω | 2 | ||
| Input high voltage (3.3V table) | VIH1 | 2 | V | DI | 2 | ||
| Input low voltage (3.3V table) | VIL1 | 0.8 | V | DI | 2 | ||
| Input current (3.3V table) | IIN1 | -1 | 1 | µA | DI (note 2) | 2 | |
| Input current Y, Z, A, B (3.3V table) | IIN4 | 125 | µA | VCC=GND, VIN=12V | 2 | ||
| Input current Y, Z, A, B (3.3V table) | IIN4 | -100 | µA | VCC=GND, VIN=-7V | 2 | ||
| Driver output short-circuit current (3.3V table) | IOD1 | -100 | mA | -7V≤VOUT≤VCC | 2 | ||
| Driver output short-circuit current (3.3V table) | IOD1 | 100 | mA | 0V≤VOUT≤12V | 2 | ||
| Driver output short-circuit current (3.3V table) | IOD1 | -25 | 25 | mA | 0V≤VOUT≤VCC | 2 | |
| Receiver differential input threshold voltage (3.3V table) | VTH | -200 | -50 | mV | -7V≤VCM≤+12V | 2 | |
| Receiver output low voltage (3.3V table) | VOL | 0.4 | V | IO=4mA, VID=-1V | 2 | ||
| Receiver input resistance (3.3V table) | RIN | 96 | kΩ | -7V≤VCM≤+12V | 2 | ||
| Receiver output short-circuit current, first printed value (3.3V table) | IOSR | -7 | 7 | mA | 0V≤VRO≤VCC | 3 | |
| Receiver output short-circuit current, second printed value (3.3V table) | IOSR | -95 | 95 | mA | 0V≤VRO≤VCC | 3 | |
| Quiescent supply current (3.3V table) | ICC | 0.5 | 1 | mA | No load | 3 | |
| Differential driver output, RS-422 load (5V table) | VOD2 | 2 | V | Fig 1, R=50Ω (RS-422) | 3 | ||
| Differential driver output, RS-485 load (5V table) | VOD2 | 1.5 | V | Fig 1, R=27Ω (RS-485) | 3 | ||
| Differential output amplitude change (5V table) | ΔVOD | 0.2 | V | Fig 1, R=50Ω or R=27Ω | 3 | ||
| Driver output common-mode voltage (5V table) | VOC | 3 | V | Fig 1, R=50Ω or R=27Ω | 3 | ||
| Driver output common-mode voltage change (5V table) | ΔVOC | 0.2 | V | Fig 1, R=50Ω or R=27Ω | 3 | ||
| Input high voltage (5V table) | VIH1 | 2 | V | DI | 3 | ||
| Input low voltage (5V table) | VIL1 | 0.8 | V | DI | 3 | ||
| Input current (5V table) | IIN1 | -1 | 1 | µA | DI (note 4) | 3 | |
| Input current Y, Z, A, B (5V table) | IIN4 | 125 | µA | VCC=GND, VIN=12V | 3 | ||
| Input current Y, Z, A, B (5V table) | IIN4 | -100 | µA | VCC=GND, VIN=-7V | 3 | ||
| Driver output short-circuit current (5V table) | IOD1 | -100 | mA | -7V≤VOUT≤VCC | 3 | ||
| Driver output short-circuit current (5V table) | IOD1 | 100 | mA | 0V≤VOUT≤12V | 4 | ||
| Driver output short-circuit current (5V table) | IOD1 | -25 | 25 | mA | 0V≤VOUT≤VCC | 4 | |
| Receiver differential input threshold voltage (5V table) | VTH | -200 | -50 | mV | -7V≤VCM≤+12V | 4 | |
| Receiver output low voltage (5V table) | VOL | 0.4 | V | IO=4mA, VID=-1V | 4 | ||
| Receiver input resistance (5V table) | RIN | 96 | kΩ | -7V≤VCM≤+12V | 4 | ||
| Receiver output short-circuit current, first printed value (5V table) | IOSR | -7 | 7 | mA | 0V≤VRO≤VCC | 4 | |
| Receiver output short-circuit current, second printed value (5V table) | IOSR | -95 | 95 | mA | 0V≤VRO≤VCC | 4 | |
| Quiescent supply current (5V table) | ICC | 0.35 | 1 | mA | No load | 4 | |
| ESD contact discharge, pins A and B | -12 | 12 | kV | IEC 61000-4-2 contact discharge | 3 | ||
| ESD human body model, pins A and B | -15 | 15 | kV | Human body model | 3 | ||
| ESD human body model, other pins | -4 | 4 | kV | Human body model | 3 | ||
| Driver differential propagation delay, low-to-high | tDPLH | 10 | 1500 | ns | Fig 2 and 3, RDIFF=54Ω, CL=54pF | 4 | |
| Driver differential propagation delay, high-to-low | tDPHL | 10 | 1500 | ns | Fig 2 and 3, RDIFF=54Ω, CL=54pF | 4 | |
| Driver differential skew | tDSKEW | -200 | -3 | 200 | ns | Fig 2 and 3, RDIFF=54Ω, CL1=CL2=100pF | 4 |
| Driver rise and fall time | tDR, tDF | 20 | 1600 | ns | Fig 2 and 3, RDIFF=54Ω, CL1=CL2=100pF | 4 | |
| Maximum data rate | fMAX | 16 | Mbps | 4 | |||
| Receiver input to output propagation delay | tRPLH | 125 | 200 | ns | Fig 4 and 5; /VID/≥2.0V; VID rise/fall time <15 ns | 4 | |
| Receiver differential skew | tRSKD | -30 | 10 | 30 | ns | Fig 4 and 5; /VID/≥2.0V; VID rise/fall time <15 ns | 5 |
| Maximum operating voltage | VCC | 7 | V | 7 | |||
| Logic pin voltage (DI, RO) | DI, RO | -0.3 | 7 | V | 7 | ||
| Bus pin voltage (A, B, Y, Z) | A, B, Y, Z | -8 | 13 | ℃ | 7 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 7 | ||
| Maximum junction temperature | TJ | 150 | ℃ | 7 | |||
| ESD HBM rating | ESD-HBM | 2000 | V | 7 | |||
| Recommended supply voltage | VDD | 3 | 5.25 | V | 7 | ||
| Operating temperature | TA | -40 | 125 | ℃ | 7 |
CAD (KiCad official)
- Symbol:
WS3077EEUA - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP8 (KiCad packages3D, STEP)
- 3D model files:
ws3077eeua-etched.step/ws3077eeua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ws3077eeua.step/ws3077eeua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GEC datasheet (11 pp, sha256
3c8dbfd18c0a29b8, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).