3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownWS2816B-2020
Worldsemi · RGB LEDs(Built-In IC) · addressable_SMD-6P,2.2x2mm_worldsemi
WS2816B-2020 from Worldsemi, in a addressable_SMD-6P,2.2x2mm_worldsemi. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Footprint from an Adom_LEDGen land drawn from the maker's package drawing; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BI | input | Secondary data input; in the typical application circuit the first LED's BI is connected to GND. |
| 2 | DI | input | Control data signal input for the single-line NZR protocol, with high-level input voltage of at least 0.7VDD and low-level input voltage of at most 0.3VDD. |
| 3 | VDD | power_in | Power supply input with a stated supply voltage range of +3.7 V to +5.5 V. |
| 4 | DO | output | Control data signal output to the next cascaded pixel's DIN, with a signal output sink current of 45 mA maximum. |
| 5 | BO | output | Secondary data output pin for the secondary data path. |
| 6 | GND | power_in | Ground for both data and power, with VSS stated as 0 V in the ratings. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Worldsemi |
| Package | addressable_SMD-6P,2.2x2mm_worldsemi |
| Category | Optoelectronics |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VDD | 3.7 | 5.5 | V | TA=25℃,VSS=0V | 2 | |
| Logical input voltage | VI | -0.3 | V | TA=25℃,VSS=0V | 2 | ||
| Quiescent current | IDD | 0.8 | mA | TA=25℃,VSS=0V | 2 | ||
| Operation junction temperature | Topt | -25 | 85 | ℃ | TA=25℃,VSS=0V | 2 | |
| Storage temperature range | Tstg | -40 | 105 | ℃ | TA=25℃,VSS=0V | 2 | |
| Transmission delay time | tPLZ | 300 | ns | CL=15pF, DIN→DOUT, RL=10KΩ | 3 | ||
| Fall time | tTHZ | 120 | µs | CL=300pF, OUTR/OUTG/OUTB | 3 | ||
| Input capacity | CI | 15 | pF | 3 | |||
| Luminous intensity (Red) | IV | 210 | 285 | 360 | mcd | VDD=5V | 3 |
| Luminous intensity (Green) | IV | 400 | 520 | 650 | mcd | VDD=5V | 3 |
| Luminous intensity (Blue) | IV | 70 | 90 | 120 | mcd | VDD=5V | 3 |
| Input current | II | -1 | 1 | µA | VI=VDD/VSS | 3 | |
| High-level input voltage | VIH | 0.7 | V | 3 | |||
| Low-level input voltage | VIL | 0.3 | V | 3 | |||
| Dynamic current consumption | IDDdyn | 0.7 | 1 | mA | OUTR,OUTG,OUTB =OFF; DO=open circuit | 3 | |
| Power consumption | PD | 250 | mW | Ta=25℃ | 3 | ||
| Signal output sink current | Iodo | 45 | mA | 3 | |||
| T0H code high voltage time | T0H | 200 | 320 | ns | 0 code, high voltage time | 4 | |
| T1H code high voltage time | T1H | 520 | 800 | ns | 1 code, high voltage time | 4 | |
| RES frame unit low voltage time | RES | 280 | µs | Frame unit, low voltage time | 4 | ||
| Data cycle T0H+T0L | T0H+T0L | 1.25 | µs | Data cycle: T0H+T0L≥1.25µs | 4 | ||
| Data cycle T1H+T1L | T1H+T1L | 1.25 | µs | Data cycle: T1H+T1L≥1.25µs | 4 | ||
| Wavelength (Green) | λd | 522 | 525 | 527 | nm | 4 | |
| Wavelength (Blue) | λd | 467 | 469 | 472 | nm | 4 | |
| Port output current | Iout | 20 | mA | OUTR+OUTG+OUTB | 3 | ||
| Hysteresis voltage | VH | 0.35 | V | 3 | |||
| Luminous angle | Θ1/2 | 120 | Deg | 4 |
CAD (land: maker's drawing; 3D: generated from the datasheet)
- Symbol:
WS2816B-2020 - Footprint:
Adom_LEDGen:addressable_SMD-6P,2.2x2mm_worldsemi - 3D model: addressable_SMD-6P,2.2x2mm_worldsemi (KiCad packages3D, STEP)
Notes from the datasheet
- "no need any external components including capacitor" (datasheet p.1)
- "The peripheral circuit don't need to add filter capacitor" (datasheet p.5)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Worldsemi datasheet, copy hosted by LCSC (9 pp, sha256
aab690e497bbba93, retrieved 2026-11-17) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: an Adom_LEDGen land drawn from the maker's package drawing; 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).