main
Ray
Publish 0.1.0
876aaa4
WS1830
VIBRATION · RF Transceiver ICs · SOP-16
WS1830 from VIBRATION, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MOSI | input | SPI slave data input; the datasheet gives no electrical limits for this pin. |
| 2 | MISO | output | SPI slave data output; the datasheet gives no electrical limits for this pin. |
| 3 | DVDD | power_in | Digital-domain supply; must satisfy PVDD=DVDD<=AVDD<=TVDD with PVSS=DVSS=AVSS=TVSS=0V. |
| 4 | DVSS | power_in | Digital-domain ground, referenced with PVSS=DVSS=AVSS=TVSS=0V. |
| 5 | NRSTPD | input | Reset or power-down pin, active low (the datasheet text is garbled here; the reading is inferred from the pin function table). |
| 6 | TVSS | power_in | Transmitter ground, referenced with PVSS=DVSS=AVSS=TVSS=0V. |
| 7 | TX1 | output | Drives the 13.56 MHz carrier to the antenna (coil driver output, paired with TX2 for a dual-coil design). |
| 8 | TVDD | power_in | Transmitter supply; must satisfy PVDD=DVDD<=AVDD<=TVDD, with the 2.0-5.5 V operating range given in the electrical table. |
| 9 | TX2 | output | Drives the 13.56 MHz carrier to the antenna (coil driver output, paired with TX1 for a dual-coil design). |
| 10 | AVDD | power_in | Analog-domain supply, rated 2.0 V min, 3.3 V typical, 5.5 V max; must satisfy PVDD=DVDD<=AVDD<=TVDD. |
| 11 | VMID | power_out | Internal reference voltage; the datasheet lists it as a power pin but gives no voltage value or load limit for it. |
| 12 | RX | input | Antenna receive input signal; the RX input sensitivity is 0.5 mVrms at fSUB=848 kHz and the RX input resistance is 50 kΩ. |
| 13 | OSCIN | input | External 27.12 MHz crystal input; the crystal start-up time is 700 µs. |
| 14 | OSCOUT | output | External 27.12 MHz crystal output. |
| 15 | NSS | input | SPI slave enable (chip select). |
| 16 | SCK | input | SPI clock input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VIBRATION |
| Package | SOP-16 |
| Category | RF & Radio |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Transmitter supply current (continuous carrier, 3.3 V) | ITVDD | 60 | 100 | mA | 连续发射载波,TVDD=3.3V | 4 | |
| Transmitter supply current (continuous carrier, 5 V) | ITVDD | 90 | 150 | mA | 连续发射载波,TVDD=5V | 4 | |
| Analog supply voltage | AVDD | 2 | 3.3 | 5.5 | V | 3 | |
| Operating temperature | TA | -40 | 85 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
WS1830 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
ws1830-etched.step/ws1830-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ws1830.step/ws1830.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: VIBRATION datasheet (5 pp, sha256
a6b3cf412d49babf, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# WS1830
**VIBRATION** · RF Transceiver ICs · SOP-16
WS1830 from VIBRATION, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MOSI | input | SPI slave data input; the datasheet gives no electrical limits for this pin. |
| 2 | MISO | output | SPI slave data output; the datasheet gives no electrical limits for this pin. |
| 3 | DVDD | power_in | Digital-domain supply; must satisfy PVDD=DVDD<=AVDD<=TVDD with PVSS=DVSS=AVSS=TVSS=0V. |
| 4 | DVSS | power_in | Digital-domain ground, referenced with PVSS=DVSS=AVSS=TVSS=0V. |
| 5 | NRSTPD | input | Reset or power-down pin, active low (the datasheet text is garbled here; the reading is inferred from the pin function table). |
| 6 | TVSS | power_in | Transmitter ground, referenced with PVSS=DVSS=AVSS=TVSS=0V. |
| 7 | TX1 | output | Drives the 13.56 MHz carrier to the antenna (coil driver output, paired with TX2 for a dual-coil design). |
| 8 | TVDD | power_in | Transmitter supply; must satisfy PVDD=DVDD<=AVDD<=TVDD, with the 2.0-5.5 V operating range given in the electrical table. |
| 9 | TX2 | output | Drives the 13.56 MHz carrier to the antenna (coil driver output, paired with TX1 for a dual-coil design). |
| 10 | AVDD | power_in | Analog-domain supply, rated 2.0 V min, 3.3 V typical, 5.5 V max; must satisfy PVDD=DVDD<=AVDD<=TVDD. |
| 11 | VMID | power_out | Internal reference voltage; the datasheet lists it as a power pin but gives no voltage value or load limit for it. |
| 12 | RX | input | Antenna receive input signal; the RX input sensitivity is 0.5 mVrms at fSUB=848 kHz and the RX input resistance is 50 kΩ. |
| 13 | OSCIN | input | External 27.12 MHz crystal input; the crystal start-up time is 700 µs. |
| 14 | OSCOUT | output | External 27.12 MHz crystal output. |
| 15 | NSS | input | SPI slave enable (chip select). |
| 16 | SCK | input | SPI clock input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VIBRATION |
| Package | SOP-16 |
| Category | RF & Radio |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Transmitter supply current (continuous carrier, 3.3 V) | ITVDD | | 60 | 100 | mA | 连续发射载波,TVDD=3.3V | 4 |
| Transmitter supply current (continuous carrier, 5 V) | ITVDD | | 90 | 150 | mA | 连续发射载波,TVDD=5V | 4 |
| Analog supply voltage | AVDD | 2 | 3.3 | 5.5 | V | | 3 |
| Operating temperature | TA | -40 | | 85 | ℃ | | 3 |
## CAD (KiCad official)
- Symbol: `WS1830`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `ws1830-etched.step` / `ws1830-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ws1830.step` / `ws1830.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [VIBRATION datasheet](docs/ws1830-datasheet.pdf) (5 pp, sha256 `a6b3cf412d49babf`, retrieved 2026-10-29, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ws1830-datasheet.pdf)