3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWM8940KGEFL
Cirrus Logic · Audio Interface ICs · QFN-24(4x4)
WM8940KGEFL from Cirrus Logic, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MICBIAS | output | Microphone bias analogue output. |
| 2 | AVDD | power_in | Analogue supply, 2.5 V to 3.6 V, must be at least the digital supply voltages. |
| 3 | AGND | power_in | Analogue ground, must be within 0.3 V of DGND. |
| 4 | DCVDD | power_in | Digital core supply, 1.71 V to 3.6 V. |
| 5 | DBVDD | power_in | Digital input/output buffer supply, 1.71 V to 3.6 V, must be at least DCVDD. |
| 6 | DGND | power_in | Digital ground, must be within 0.3 V of AGND. |
| 7 | ADCDAT | output | ADC digital audio data output. |
| 8 | DACDAT | input | DAC digital audio data input. |
| 9 | FRAME | bidirectional | DAC and ADC sample rate clock or frame sync, input or output depending on master/slave mode. |
| 10 | BCLK | bidirectional | Digital audio port bit clock, input or output depending on master/slave mode. |
| 11 | MCLK | input | Master clock input. |
| 12 | CSB/GPIO | bidirectional | 3-wire control interface chip select, or a GPIO pin when configured by GPIOSEL. |
| 13 | SCLK | input | 3-wire control interface clock input, or 2-wire control interface clock input. |
| 14 | SDIN | bidirectional | 3-wire control interface data input/output, or 2-wire control interface data input. |
| 15 | MODE / GPIO | input | Control interface mode selection pin (low selects 2-wire, high or Hi-Z selects 3-wire), or a GPIO pin when MODE_GPIO is set. |
| 16 | MONOOUT | output | Mono output. |
| 17 | SPKOUTP | output | Speaker positive output. |
| 18 | SPKGND | power_in | Speaker ground. |
| 19 | SPKOUTN | output | Speaker negative output. |
| 20 | SPKVDD | power_in | Speaker supply, 2.5 V to 3.6 V. |
| 21 | AUX | input | Auxiliary analogue input. |
| 22 | VMID | passive | Decoupling for the midrail reference voltage. |
| 23 | MICN | input | Microphone negative input (common mode). |
| 24 | MICP | input | Microphone positive input. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cirrus Logic |
| Package | QFN-24(4x4) |
| Category | Communication Interface Chip |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltages DBVDD, DCVDD, AVDD, SPKVDD | -0.3 | 4.2 | V | 8 | |||
| Operating temperature range | TA | -25 | 85 | C | 8 | ||
| Storage temperature after soldering | -65 | 150 | C | 8 | |||
| Voltage range digital inputs (min, referenced to DGND) | -0.3 | V | 8 | ||||
| Voltage range analogue inputs (min, referenced to AGND) | -0.3 | V | 8 | ||||
| Digital supply range (Core) | DCVDD | 1.71 | 3.6 | V | 8 | ||
| Digital supply range (Buffer) | DBVDD | 1.71 | 3.6 | V | 8 | ||
| Analogue supplies range | AVDD, SPKVDD | 2.5 | 3.6 | V | 8 | ||
| Maximum Input PGA Programmable Gain | 33.25 | 35.25 | 37.25 | dB | Gain adjusted by INPPGAVOL | 9 | |
| Minimum Input PGA Programmable Gain | -14 | -12 | -10 | dB | Gain adjusted by INPPGAVOL | 9 | |
| Maximum Gain from AUX input PGA mixers | 4 | 6 | 7.5 | dB | Gain adjusted by AUX2BOOSTVOL | 9 | |
| Minimum Gain from AUX input PGA mixers | -14 | -12 | -9 | dB | Gain adjusted by AUX2BOOSTVOL | 9 |
CAD (KiCad official)
- Symbol:
WM8940KGEFL - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
wm8940kgefl-etched.step/wm8940kgefl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wm8940kgefl.step/wm8940kgefl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Cirrus Logic datasheet (88 pp, sha256
b6e6ec85d4c3acaf, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).