main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs wm8766geds-rv: factory component page (tier=lcsc) · Ray
viewers wm8766geds-rv: viewers · Ray
package.json Publish 0.1.2 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.2 · Ray
verification.json Verified: Rebuilt by the parts factory: tier lcsc, 28 pins · Ray
wm8766geds-rv-etched.glb Publish 0.1.0 · Ray
wm8766geds-rv-etched.step wm8766geds-rv: factory component page (tier=lcsc) · Ray
wm8766geds-rv-hero.glb wm8766geds-rv: hero GLB from the etched model (keeps the MPN mark) · Ray
wm8766geds-rv-hero.overlay.json wm8766geds-rv: hero GLB from the etched model (keeps the MPN mark) · Ray
wm8766geds-rv.glb Publish 0.1.0 · Ray
wm8766geds-rv.kicad_mod Publish 0.1.0 · Ray
wm8766geds-rv.kicad_sym Publish 0.1.0 · Ray
wm8766geds-rv.lbr Publish 0.1.1 · Ray
wm8766geds-rv.step Publish 0.1.0 · Ray

WM8766GEDS

Cirrus Logic · Digital To Analog Converters (DACs) · SSOP-28

WM8766GEDS from Cirrus Logic, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MODE input Selects the control format: 0 = software control, 1 = hardware control.
2 MCLK input Master clock input, which must be 128, 192, 256, 384, 512 or 768fs (fs = word clock frequency).
3 BCLK bidirectional Audio interface bit clock, an input in slave mode and an output in master mode.
4 LRCLK bidirectional Audio left/right word clock, an input in slave mode and an output in master mode.
5 DVDD power_in Digital positive supply, specified at 2.7V to 3.6V and never more than 0.3V above AVDD.
6 DGND power_in Digital ground (negative supply), to be kept within 0.3V of AGND.
7 DIN1 input DAC channel 1 serial data input, a Schmitt-trigger digital input.
8 DIN2 input DAC channel 2 serial data input, a Schmitt-trigger digital input.
9 DIN3 input DAC channel 3 serial data input, a Schmitt-trigger digital input.
10 DNC unconnected Do not connect.
11 ML/I2S input Software mode: serial interface latch signal; hardware mode: input audio data format select.
12 MC/IWL input Software mode: serial control interface clock; hardware mode: audio data input word length select.
13 MD/DM input Software mode: serial interface data; hardware mode: de-emphasis selection (0 = off, 1 = on).
14 MUTE bidirectional DAC mute input or DAC zero flag output; when left floating it outputs a weak high (about 10kΩ output impedance) to indicate infinite zero detect.
15 TESTREF output Analogue test reference output, decoupled with 0.1µF and 10µF capacitors per the recommended external components.
16 VREFN power_in DAC negative reference supply, at 0V (ground).
17 VREFP power_in DAC positive reference supply, specified at 2.7V to 5.5V.
18 VMID output Midrail divider decoupling pin (VREFP/2), requiring 10µF external decoupling.
19 NC unconnected No internal connection.
20 NC unconnected No internal connection.
21 VOUT1L output DAC channel 1 left analogue output, with 0dBFS full scale of VREFP/5 Vrms.
22 VOUT1R output DAC channel 1 right analogue output, with 0dBFS full scale of VREFP/5 Vrms.
23 VOUT2L output DAC channel 2 left analogue output, with 0dBFS full scale of VREFP/5 Vrms.
24 VOUT2R output DAC channel 2 right analogue output, with 0dBFS full scale of VREFP/5 Vrms.
25 VOUT3L output DAC channel 3 left analogue output, with 0dBFS full scale of VREFP/5 Vrms.
26 VOUT3R output DAC channel 3 right analogue output, with 0dBFS full scale of VREFP/5 Vrms.
27 AGND power_in Analogue ground (negative supply) and substrate connection, to be kept within 0.3V of DGND.
28 AVDD power_in Analogue positive supply, specified at 2.7V to 5.5V.

Key specifications

Parameter Value
Manufacturer Cirrus Logic
Package SSOP-28
Category Data Converters
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Digital supply voltage -0.3 5 V 5
Analogue supply voltage -0.3 7 V 5
Voltage range digital inputs -0.3 V Min relative to DGND; max printed as DVDD +0.3V 5
Voltage range analogue inputs -0.3 V Min relative to AGND; max printed as AVDD +0.3V 5
Master Clock Frequency 37 MHz 5
Operating temperature range TA -25 85 °C 5
Storage temperature after soldering -65 150 °C 5
Digital supply range DVDD 2.7 3.6 V 6
Analogue supply range AVDD, VREFP 2.7 5.5 V 6
Difference DGND to AGND -0.3 0 0.3 V 6
SNR 95 103 dB A-weighted, @ fs = 48kHz 6
Dynamic Range DNR 95 103 dB A-weighted, -60dB full scale input 6
Total Harmonic Distortion (THD) -90 -80 dB 1kHz, 0dBFs 6
MCLK System clock cycle time tMCLKY 28 1000 ns 7
Power-saving mode activated 2 10 Us After MCLK stopped 7
Normal mode resumed 0.5 1 MCLK cycle After MCLK re-started 7
LRCLK propagation delay from BCLK falling edge tDL 0 10 ns 8
POR minimum threshold Vpord 0.3 0.5 0.8 V Typical values, not tested 11
POR threshold on Vpor_on 1.3 1.7 2 V Typical values, not tested 11
POR threshold off Vpor_off 1.3 1.7 2 V Typical values, not tested 11
Ground AGND, VREFN, DGND 0 V 6
SNR 101 dB A-weighted @ fs = 96kHz 6
SNR 99 dB A-weighted @ fs = 96kHz, AVDD = 3.3V 6
Mute Attenuation 100 dB 1kHz Input, 0dB gain 6
DAC Channel Separation 100 dB 6
Power Supply Rejection Ratio PSRR 50 dB 1kHz 100mVpp 6
Power Supply Rejection Ratio PSRR 45 dB 20Hz to 20kHz 100mVp-p 6
Analogue Supply Current 13.8 mA AVDD, VREFP = 5V 6
Digital Supply Current 11 mA DVDD = 3.3V 6
Potential Divider Resistance RVMID 133 kΩ (VREFP to VMID) and (VMID to VREFN) 6
MCLK System clock pulse width high tMCLKH 11 ns 7
MCLK System clock pulse width low tMCLKL 11 ns 7
DIN1/2/3 setup time to BCLK rising edge tDST 10 ns 8
DIN1/2/3 hold time from BCLK rising edge tDHT 10 ns 8
BCLK cycle time tBCY 50 ns 9
BCLK pulse width high tBCH 20 ns 9
BCLK pulse width low tBCL 20 ns 9
LRCLK set-up time to BCLK rising edge tLRSU 10 ns 9
LRCLK hold time from BCLK rising edge tLRH 10 ns 9
DIN1/2/3 set-up time to BCLK rising edge tDS 10 ns 9
DIN1/2/3 hold time from BCLK rising edge tDH 10 ns 9
MC/IWL rising edge to ML/I2S rising edge tSCS 60 ns 10
MC/IWL pulse cycle time tSCY 80 ns 10
MC/IWL pulse width low tSCL 30 ns 10
MC/IWL pulse width high tSCH 30 ns 10
MD/DM to MC/IWL set-up time tDSU 20 ns 10
MC/IWL to MD/DM hold time tDHO 20 ns 10
ML/I2S pulse width low tCSL 20 ns 10
ML/I2S pulse width high tCSH 20 ns 10
ML/I2S rising to MC/IWL rising tCSS 20 ns 10

CAD (KiCad official)

  • Symbol: WM8766GEDS
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28 (KiCad packages3D, STEP)
  • 3D model files: wm8766geds-rv-etched.step / wm8766geds-rv-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); wm8766geds-rv.step / wm8766geds-rv.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Cirrus Logic datasheet (35 pp, sha256 01bc67d3a7de2fe2, retrieved 2026-11-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF