← Commit history

Publish 0.1.1

Ray ·0cd9b554a5 · ·parent 83f84b6
4 files changed +149−138
README.md+64−60
@@ -8,34 +8,34 @@ WM8766GEDS from Cirrus Logic, in a SSOP-28. Pinout and pin descriptions extracte  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | MODE | input | Selects the control format: 0 = software control, 1 = hardware control. |-| 2 | MCLK | input | Master clock input at 128, 192, 256, 384, 512 or 768fs (fs = word clock frequency), with a maximum master clock frequency of 37MHz. |-| 3 | BCLK | bidirectional | Audio interface bit clock, an input in slave mode and an output in master mode. |-| 4 | LRCLK | bidirectional | Audio left/right word clock, an input in slave mode and an output in master mode. |-| 5 | DVDD | power_in | Digital positive supply, 2.7V to 3.6V. |-| 6 | DGND | power_in | Digital negative supply (ground); must be within 0.3V of AGND for normal operation. |+| 1 | MODE | input | Selects the control format: logic 0 selects software control and logic 1 selects hardware control; digital inputs have Schmitt trigger buffers. |+| 2 | MCLK | input | Master clock input supporting 128, 192, 256, 384, 512 or 768fs, where fs is the word clock frequency, with a maximum master clock frequency of 37MHz. |+| 3 | BCLK | bidirectional | Audio interface bit clock, an input in slave mode and an output generated by the WM8766 in master mode. |+| 4 | LRCLK | bidirectional | Audio left/right word clock, an input in slave mode and an output generated by the WM8766 in master mode. |+| 5 | DVDD | power_in | Digital positive supply, 2.7V to 3.6V, and must never be more than 0.3V greater than AVDD. |+| 6 | DGND | power_in | Digital negative supply (ground), which must be within 0.3V of AGND for normal operation. | | 7 | DIN1 | input | DAC channel 1 serial data input. | | 8 | DIN2 | input | DAC channel 2 serial data input. | | 9 | DIN3 | input | DAC channel 3 serial data input. | | 10 | DNC | unconnected | Do not connect. |-| 11 | ML/I2S | input | Software mode: serial interface latch signal, edge sensitive and latched on the rising edge; hardware mode: input audio data format select. |-| 12 | MC/IWL | input | Software mode: serial control interface clock; hardware mode: audio data input word length select. |-| 13 | MD/DM | input | Software mode: serial interface data, sampled on the rising edge of MC/IWL; hardware mode: de-emphasis select (0 = off, 1 = on). |-| 14 | MUTE | bidirectional | DAC zero flag output or DAC mute input (0 = normal operation, 1 = mute DAC channels); output impedance is 10kOhm when used as an output. |-| 15 | TESTREF | output | Test reference analogue output, decoupled with 0.1uF (C8) per the recommended external components. |-| 16 | VREFN | power_in | DAC negative supply/reference, specified as 0V (ground) with AGND. |+| 11 | ML/I2S | input | In software mode it is the serial interface latch signal (data latched on rising edge); in hardware mode it selects the input audio data format. |+| 12 | MC/IWL | input | In software mode it is the serial control interface clock; in hardware mode it selects the audio data input word length. |+| 13 | MD/DM | input | In software mode it is the serial interface data (sampled on rising edge of MC/IWL); in hardware mode it selects de-emphasis (0 = off, 1 = on). |+| 14 | MUTE | bidirectional | DAC zero flag output or DAC mute input; logic high soft-mutes the DACs, logic low disables automute, and when floating it outputs a weak high (10kOhm output impedance) when zero flags are raised. |+| 15 | TESTREF | output | Test reference analogue output, decoupled externally with 0.1uF per the recommended external components table. |+| 16 | VREFN | power_in | DAC negative reference supply, nominally 0V ground. | | 17 | VREFP | power_in | DAC positive reference supply, 2.7V to 5.5V. |-| 18 | VMID | output | Midrail divider decoupling pin (VREFP/2 reference) requiring 10uF external decoupling. |+| 18 | VMID | output | Midrail divider decoupling pin, requiring 10uF external decoupling; reference voltage is VREFP/2. | | 19 | NC | unconnected | No internal connection. | | 20 | NC | unconnected | No internal connection. |-| 21 | VOUT1L | output | DAC channel 1 left analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load. |-| 22 | VOUT1R | output | DAC channel 1 right analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load. |-| 23 | VOUT2L | output | DAC channel 2 left analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load. |-| 24 | VOUT2R | output | DAC channel 2 right analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load. |-| 25 | VOUT3L | output | DAC channel 3 left analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load. |-| 26 | VOUT3R | output | DAC channel 3 right analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load. |-| 27 | AGND | power_in | Analogue negative supply and substrate connection; must be within 0.3V of DGND. |-| 28 | AVDD | power_in | Analogue positive supply, 2.7V to 5.5V. |+| 21 | VOUT1L | output | DAC channel 1 left analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale. |+| 22 | VOUT1R | output | DAC channel 1 right analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale. |+| 23 | VOUT2L | output | DAC channel 2 left analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale. |+| 24 | VOUT2R | output | DAC channel 2 right analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale. |+| 25 | VOUT3L | output | DAC channel 3 left analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale. |+| 26 | VOUT3R | output | DAC channel 3 right analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale. |+| 27 | AGND | power_in | Analogue negative supply and substrate connection, 0V. |+| 28 | AVDD | power_in | Analogue positive supply, 2.7V to 5.5V, which also feeds the DAC analogue circuitry. |  ## Key specifications @@ -52,46 +52,47 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Digital supply voltage |  | -0.3 |  | 5 | V |  | 5 |+| Digital supply voltage | DVDD | -0.3 |  | 5 | V |  | 5 | | Analogue supply voltage |  | -0.3 |  | 7 | V |  | 5 |-| Voltage range digital inputs |  | -0.3 |  |  | V | Min referenced to DGND; max printed as DVDD +0.3V | 5 |-| Voltage range analogue inputs |  | -0.3 |  |  | V | Min referenced to AGND; max printed as AVDD +0.3V | 5 |-| Master Clock Frequency |  |  |  | 37 | MHz |  | 5 |+| Voltage range digital inputs (DGND to DVDD) |  | -0.3 |  | 0.3 | V |  | 5 |+| Voltage range analogue inputs (AGND to AVDD) |  | -0.3 |  | 0.3 | V |  | 5 |+| Master clock frequency | MCLK |  |  | 37 | MHz |  | 5 | | Operating temperature range | TA | -25 |  | 85 | °C |  | 5 | | Storage temperature after soldering |  | -65 |  | 150 | °C |  | 5 | | Digital supply range | DVDD | 2.7 |  | 3.6 | V |  | 6 | | Analogue supply range | AVDD, VREFP | 2.7 |  | 5.5 | V |  | 6 | | Difference DGND to AGND |  | -0.3 | 0 | 0.3 | V |  | 6 |-| Input LOW level | VIL |  |  | 0.3 | x DVDD |  | 6 |-| Input HIGH level | VIH | 0.7 |  |  | x DVDD |  | 6 |-| Output LOW | VOL |  |  | 0.1 | x DVDD | IOL=1mA | 6 |-| Output HIGH | VOH | 0.9 |  |  | x DVDD | IOH= -1mA | 6 |-| SNR A-weighted |  | 95 | 103 |  | dB | A-weighted, @ fs = 48kHz | 6 |-| SNR A-weighted |  |  | 101 |  | dB | A-weighted @ fs = 96kHz | 6 |-| SNR A-weighted |  |  | 99 |  | dB | A-weighted, @ fs = 96kHz, AVDD = 3.3V | 6 |-| Dynamic Range | DNR | 95 | 103 |  | dB | A-weighted, -60dB full scale input | 6 |-| Total Harmonic Distortion (THD) |  |  | -90 | -80 | dB | 1kHz, 0dBFs | 6 |-| Mute Attenuation |  | 100 |  |  | dB | 1kHz Input, 0dB gain | 6 |-| DAC Channel Separation |  | 100 |  |  | dB |  | 6 |-| Power Supply Rejection Ratio | PSRR | 50 |  |  | dB | 1kHz 100mVpp | 6 |-| Power Supply Rejection Ratio | PSRR | 45 |  |  | dB | 20Hz to 20kHz 100mVp-p | 6 |-| Analogue Supply Current |  |  |  | 13.8 | mA | AVDD, VREFP = 5V | 6 |-| Digital Supply Current |  |  |  | 11 | mA | DVDD = 3.3V | 6 |-| MCLK System clock pulse width high | tMCLKH | 11 |  |  | ns |  | 7 |-| MCLK System clock pulse width low | tMCLKL | 11 |  |  | ns |  | 7 |-| MCLK System clock cycle time | tMCLKY | 28 |  | 1000 | ns |  | 7 |-| Power-saving mode activated |  | 2 |  | 10 | Us | After MCLK stopped | 7 |-| Normal mode resumed |  | 0.5 |  | 1 | MCLK cycle | After MCLK re-started | 7 |-| LRCLK propagation delay from BCLK falling edge | tDL | 0 |  | 10 | ns | Master Mode | 8 |-| DIN1/2/3 setup time to BCLK rising edge | tDST | 10 |  |  | ns | Master Mode | 8 |-| DIN1/2/3 hold time from BCLK rising edge | tDHT | 10 |  |  | ns | Master Mode | 8 |-| BCLK cycle time | tBCY | 50 |  |  | ns | Slave Mode | 9 |-| BCLK pulse width high | tBCH | 20 |  |  | ns | Slave Mode | 9 |-| BCLK pulse width low | tBCL | 20 |  |  | ns | Slave Mode | 9 |-| LRCLK set-up time to BCLK rising edge | tLRSU | 10 |  |  | ns | Slave Mode | 9 |-| LRCLK hold time from BCLK rising edge | tLRH | 10 |  |  | ns | Slave Mode | 9 |-| DIN1/2/3 set-up time to BCLK rising edge | tDS | 10 |  |  | ns | Slave Mode | 9 |-| DIN1/2/3 hold time from BCLK rising edge | tDH | 10 |  |  | ns | Slave Mode | 9 |+| SNR A-weighted @ fs = 48kHz |  | 95 | 103 |  | dB | Load = 10kΩ, 50pF; A-weighted, @ fs = 48kHz | 6 |+| Dynamic range (DNR) | DNR | 95 | 103 |  | dB | Load = 10kΩ, 50pF; A-weighted, -60dB full scale input | 6 |+| Total harmonic distortion (THD) |  |  | -90 | -80 | dB | Load = 10kΩ, 50pF; 1kHz, 0dBFs | 6 |+| SNR A-weighted @ fs = 96kHz |  |  | 101 |  | dB | Load = 10kΩ, 50pF; A-weighted @ fs = 96kHz | 6 |+| SNR A-weighted @ fs = 192kHz |  |  | 101 |  | dB | Load = 10kΩ, 50pF; A-weighted @ fs = 192kHz | 6 |+| SNR A-weighted @ fs = 48kHz, AVDD = 3.3V |  |  | 101 |  | dB | Load = 10kΩ, 50pF; A-weighted, @ fs = 48kHz, AVDD = 3.3V | 6 |+| SNR A-weighted @ fs = 96kHz, AVDD = 3.3V |  |  | 99 |  | dB | Load = 10kΩ, 50pF; A-weighted @ fs = 96kHz, AVDD = 3.3V | 6 |+| Mute attenuation |  |  | 100 |  | dB | Load = 10kΩ, 50pF; 1kHz Input, 0dB gain | 6 |+| DAC channel separation |  |  | 100 |  | dB | Load = 10kΩ, 50pF | 6 |+| Power supply rejection ratio | PSRR |  | 50 |  | dB | Load = 10kΩ, 50pF; 1kHz 100mVpp | 6 |+| Power supply rejection ratio | PSRR |  | 45 |  | dB | Load = 10kΩ, 50pF; 20Hz to 20kHz 100mVp-p | 6 |+| Analogue supply current |  |  | 13.8 |  | mA | AVDD, VREFP = 5V | 6 |+| Digital supply current |  |  | 11 |  | mA | DVDD = 3.3V | 6 |+| POR threshold DVDD minimum (Vpord) | Vpord | 0.3 | 0.5 | 0.8 | V | Typical values, not tested | 11 |+| POR release threshold (Vpor_on) | Vpor_on | 1.3 | 1.7 | 2 | V | Typical values, not tested | 11 |+| POR assert threshold (Vpor_off) | Vpor_off | 1.3 | 1.7 | 2 | V | Typical values, not tested | 11 |+| MCLK system clock pulse width high | tMCLKH | 11 |  |  | ns |  | 7 |+| MCLK system clock pulse width low | tMCLKL | 11 |  |  | ns |  | 7 |+| MCLK system clock cycle time | tMCLKY | 28 |  | 1000 | ns |  | 7 |+| Power-saving mode activated after MCLK stopped |  | 2 |  | 10 | Us |  | 7 |+| Normal mode resumed after MCLK re-started |  | 0.5 |  | 1 | MCLK cycle |  | 7 |+| LRCLK propagation delay from BCLK falling edge | tDL | 0 |  | 10 | ns | Master mode | 8 |+| DIN1/2/3 setup time to BCLK rising edge | tDST | 10 |  |  | ns | Master mode | 8 |+| DIN1/2/3 hold time from BCLK rising edge | tDHT | 10 |  |  | ns | Master mode | 8 |+| BCLK cycle time | tBCY | 50 |  |  | ns | Slave mode | 9 |+| BCLK pulse width high | tBCH | 20 |  |  | ns | Slave mode | 9 |+| BCLK pulse width low | tBCL | 20 |  |  | ns | Slave mode | 9 |+| LRCLK set-up time to BCLK rising edge | tLRSU | 10 |  |  | ns | Slave mode | 9 |+| LRCLK hold time from BCLK rising edge | tLRH | 10 |  |  | ns | Slave mode | 9 |+| DIN1/2/3 set-up time to BCLK rising edge (slave) | tDS | 10 |  |  | ns | Slave mode | 9 |+| DIN1/2/3 hold time from BCLK rising edge (slave) | tDH | 10 |  |  | ns | Slave mode | 9 | | MC/IWL rising edge to ML/I2S rising edge | tSCS | 60 |  |  | ns |  | 10 | | MC/IWL pulse cycle time | tSCY | 80 |  |  | ns |  | 10 | | MC/IWL pulse width low | tSCL | 30 |  |  | ns |  | 10 |@@ -101,10 +102,13 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | ML/I2S pulse width low | tCSL | 20 |  |  | ns |  | 10 | | ML/I2S pulse width high | tCSH | 20 |  |  | ns |  | 10 | | ML/I2S rising to MC/IWL rising | tCSS | 20 |  |  | ns |  | 10 |-| Power-on reset, DVDD below minimum threshold | Vpord | 0.3 | 0.5 | 0.8 | V | Typical values, not tested | 11 |-| Power-on reset release threshold | Vpor_on | 1.3 | 1.7 | 2 | V | Typical values, not tested | 11 |-| Power-on reset assert threshold on power down | Vpor_off | 1.3 | 1.7 | 2 | V | Typical values, not tested | 11 |-| Stopband Attenuation |  |  |  | -60 | dB | f > 0.555fs | 31 |+| DAC filter passband ripple |  | -0.05 |  | 0.05 | dB | Passband ±0.05 dB | 31 |+| DAC filter stopband attenuation |  |  |  | -60 | dB | f > 0.555fs | 31 |+| DAC filter stopband edge |  | 0.555 |  |  | fs |  | 31 |+| DAC filter passband edge |  |  |  | 0.444 | fs | Passband ±0.05 dB | 31 |+| DAC filter -3dB point |  |  | 0.487 |  | fs | -3dB | 31 |+| DAC filter group delay |  |  | 21 |  | fs |  | 31 |+| Potential divider resistance RVMID (VREFP to VMID and VMID to VREFN) | RVMID |  | 133 |  | kΩ |  | 6 |  ## CAD (KiCad official) @@ -117,7 +121,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Cirrus Logic datasheet](docs/wm8766geds-rv-datasheet.pdf) (35 pp, sha256 `01bc67d3a7de2fe2`, retrieved 2026-11-12, tier: lcsc)+- **Datasheet:** [Cirrus Logic datasheet](docs/wm8766geds-rv-datasheet.pdf) (35 pp, sha256 `01bc67d3a7de2fe2`, retrieved 2026-11-13, tier: lcsc) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+34−37
@@ -1,6 +1,6 @@ {   "slug": "wm8766geds-rv",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Cirrus Logic Digital To Analog Converters (DACs), SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "wm8766geds-rv-hero.glb",-    "wm8766geds-rv-hero.overlay.json",-    "wm8766geds-rv-etched.glb"+    "wm8766geds-rv-hero.overlay.json"   ],   "component": {     "mpn": "WM8766GEDS/RV",@@ -43,7 +42,7 @@       "symbol": "wm8766geds-rv.kicad_sym",       "footprint": "wm8766geds-rv.kicad_mod",       "model_3d": "wm8766geds-rv-hero.glb",-      "model_3d_plain": "wm8766geds-rv-etched.glb",+      "model_3d_plain": "wm8766geds-rv.glb",       "model_3d_step": "wm8766geds-rv-etched.step",       "model_3d_step_plain": "wm8766geds-rv.step",       "lbr": "wm8766geds-rv.lbr"@@ -54,17 +53,15 @@       "mouser": "238-WM8766GEDS/RV"     },     "distributor_check": {-      "checked_at": "2026-11-12T17:47:42Z",+      "checked_at": "2026-11-13T00:35:14Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "WM8766GEDS/RV-ND",-        "status": "found",-        "lifecycle": "Obsolete"+        "status": "found"       },       "mouser": {         "pn": "238-WM8766GEDS/RV",-        "status": "found",-        "lifecycle": "Obsolete"+        "status": "found"       },       "matched_as": "WM8766GEDS/RV"     },@@ -73,37 +70,37 @@         "number": "1",         "name": "MODE",         "type": "input",-        "description": "Selects the control format: 0 = software control, 1 = hardware control."+        "description": "Selects the control format: logic 0 selects software control and logic 1 selects hardware control; digital inputs have Schmitt trigger buffers."       },       {         "number": "2",         "name": "MCLK",         "type": "input",-        "description": "Master clock input at 128, 192, 256, 384, 512 or 768fs (fs = word clock frequency), with a maximum master clock frequency of 37MHz."+        "description": "Master clock input supporting 128, 192, 256, 384, 512 or 768fs, where fs is the word clock frequency, with a maximum master clock frequency of 37MHz."       },       {         "number": "3",         "name": "BCLK",         "type": "bidirectional",-        "description": "Audio interface bit clock, an input in slave mode and an output in master mode."+        "description": "Audio interface bit clock, an input in slave mode and an output generated by the WM8766 in master mode."       },       {         "number": "4",         "name": "LRCLK",         "type": "bidirectional",-        "description": "Audio left/right word clock, an input in slave mode and an output in master mode."+        "description": "Audio left/right word clock, an input in slave mode and an output generated by the WM8766 in master mode."       },       {         "number": "5",         "name": "DVDD",         "type": "power_in",-        "description": "Digital positive supply, 2.7V to 3.6V."+        "description": "Digital positive supply, 2.7V to 3.6V, and must never be more than 0.3V greater than AVDD."       },       {         "number": "6",         "name": "DGND",         "type": "power_in",-        "description": "Digital negative supply (ground); must be within 0.3V of AGND for normal operation."+        "description": "Digital negative supply (ground), which must be within 0.3V of AGND for normal operation."       },       {         "number": "7",@@ -133,37 +130,37 @@         "number": "11",         "name": "ML/I2S",         "type": "input",-        "description": "Software mode: serial interface latch signal, edge sensitive and latched on the rising edge; hardware mode: input audio data format select."+        "description": "In software mode it is the serial interface latch signal (data latched on rising edge); in hardware mode it selects the input audio data format."       },       {         "number": "12",         "name": "MC/IWL",         "type": "input",-        "description": "Software mode: serial control interface clock; hardware mode: audio data input word length select."+        "description": "In software mode it is the serial control interface clock; in hardware mode it selects the audio data input word length."       },       {         "number": "13",         "name": "MD/DM",         "type": "input",-        "description": "Software mode: serial interface data, sampled on the rising edge of MC/IWL; hardware mode: de-emphasis select (0 = off, 1 = on)."+        "description": "In software mode it is the serial interface data (sampled on rising edge of MC/IWL); in hardware mode it selects de-emphasis (0 = off, 1 = on)."       },       {         "number": "14",         "name": "MUTE",         "type": "bidirectional",-        "description": "DAC zero flag output or DAC mute input (0 = normal operation, 1 = mute DAC channels); output impedance is 10kOhm when used as an output."+        "description": "DAC zero flag output or DAC mute input; logic high soft-mutes the DACs, logic low disables automute, and when floating it outputs a weak high (10kOhm output impedance) when zero flags are raised."       },       {         "number": "15",         "name": "TESTREF",         "type": "output",-        "description": "Test reference analogue output, decoupled with 0.1uF (C8) per the recommended external components."+        "description": "Test reference analogue output, decoupled externally with 0.1uF per the recommended external components table."       },       {         "number": "16",         "name": "VREFN",         "type": "power_in",-        "description": "DAC negative supply/reference, specified as 0V (ground) with AGND."+        "description": "DAC negative reference supply, nominally 0V ground."       },       {         "number": "17",@@ -175,7 +172,7 @@         "number": "18",         "name": "VMID",         "type": "output",-        "description": "Midrail divider decoupling pin (VREFP/2 reference) requiring 10uF external decoupling."+        "description": "Midrail divider decoupling pin, requiring 10uF external decoupling; reference voltage is VREFP/2."       },       {         "number": "19",@@ -193,49 +190,49 @@         "number": "21",         "name": "VOUT1L",         "type": "output",-        "description": "DAC channel 1 left analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 1 left analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "22",         "name": "VOUT1R",         "type": "output",-        "description": "DAC channel 1 right analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 1 right analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "23",         "name": "VOUT2L",         "type": "output",-        "description": "DAC channel 2 left analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 2 left analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "24",         "name": "VOUT2R",         "type": "output",-        "description": "DAC channel 2 right analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 2 right analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "25",         "name": "VOUT3L",         "type": "output",-        "description": "DAC channel 3 left analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 3 left analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "26",         "name": "VOUT3R",         "type": "output",-        "description": "DAC channel 3 right analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 3 right analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "27",         "name": "AGND",         "type": "power_in",-        "description": "Analogue negative supply and substrate connection; must be within 0.3V of DGND."+        "description": "Analogue negative supply and substrate connection, 0V."       },       {         "number": "28",         "name": "AVDD",         "type": "power_in",-        "description": "Analogue positive supply, 2.7V to 5.5V."+        "description": "Analogue positive supply, 2.7V to 5.5V, which also feeds the DAC analogue circuitry."       }     ],     "provenance": {@@ -249,11 +246,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The MPN given (WM8766GEDS) has no /V or /RV suffix. The ordering table lists WM8766GEDS/V and WM8766; Pin 16 (VREFN) and pin 17 (VREFP) supply ranges are taken from the Recommended Operating Conditions ; Pin 14 MUTE is typed bidirectional because the datasheet describes it as a digital input/output. The"+          "extractor flagged: The requested MPN WM8766GEDS does not appear exactly in the ordering table; the datasheet lists WM87; Pin 14 MUTE is listed as Digital input/output in the datasheet; its behaviour as input vs output dep; Pins 3 and 4 are listed as Digital input/output in the datasheet; they are inputs in slave mode and "         ],         "pages_sent": 35,-        "cost_usd": 0.1268,-        "at": "2026-11-12T17:47:13"+        "cost_usd": 0.1273,+        "at": "2026-11-13T00:34:56"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/60618a95d11993a6b564763e2e3cd42c.pdf",@@ -290,7 +287,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -308,13 +305,13 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "525df05d265557904c12034c2cd9029fe2867e35637d4e6f1e537370392d1401",-        "checked": "2026-11-12",+        "sha256": "55b294e6705ea6c482590783e9032ff45f55cf95e34c6d80b78e7d9f18c31f97",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DS (28-pin SSOP, DM007.E)",+      "package_code": "DS (28-lead SSOP, DM007.E, JEDEC MO-150 AH)",       "source_page": 35,       "D": {         "nom_mm": 10.2,
page.json+37−38
@@ -4,7 +4,7 @@   "slug": "wm8766geds-rv",   "title": "WM8766GEDS/RV",   "brief": "Cirrus Logic Digital To Analog Converters (DACs), SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "wm8766geds-rv.kicad_sym",       "footprint": "wm8766geds-rv.kicad_mod",       "model_3d": "wm8766geds-rv-hero.glb",-      "model_3d_plain": "wm8766geds-rv-etched.glb",+      "model_3d_plain": "wm8766geds-rv.glb",       "model_3d_step": "wm8766geds-rv-etched.step",       "model_3d_step_plain": "wm8766geds-rv.step",       "lbr": "wm8766geds-rv.lbr"@@ -36,17 +36,15 @@       "mouser": "238-WM8766GEDS/RV"     },     "distributor_check": {-      "checked_at": "2026-11-12T17:47:42Z",+      "checked_at": "2026-11-13T00:35:14Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "WM8766GEDS/RV-ND",-        "status": "found",-        "lifecycle": "Obsolete"+        "status": "found"       },       "mouser": {         "pn": "238-WM8766GEDS/RV",-        "status": "found",-        "lifecycle": "Obsolete"+        "status": "found"       },       "matched_as": "WM8766GEDS/RV"     },@@ -55,37 +53,37 @@         "number": "1",         "name": "MODE",         "type": "input",-        "description": "Selects the control format: 0 = software control, 1 = hardware control."+        "description": "Selects the control format: logic 0 selects software control and logic 1 selects hardware control; digital inputs have Schmitt trigger buffers."       },       {         "number": "2",         "name": "MCLK",         "type": "input",-        "description": "Master clock input at 128, 192, 256, 384, 512 or 768fs (fs = word clock frequency), with a maximum master clock frequency of 37MHz."+        "description": "Master clock input supporting 128, 192, 256, 384, 512 or 768fs, where fs is the word clock frequency, with a maximum master clock frequency of 37MHz."       },       {         "number": "3",         "name": "BCLK",         "type": "bidirectional",-        "description": "Audio interface bit clock, an input in slave mode and an output in master mode."+        "description": "Audio interface bit clock, an input in slave mode and an output generated by the WM8766 in master mode."       },       {         "number": "4",         "name": "LRCLK",         "type": "bidirectional",-        "description": "Audio left/right word clock, an input in slave mode and an output in master mode."+        "description": "Audio left/right word clock, an input in slave mode and an output generated by the WM8766 in master mode."       },       {         "number": "5",         "name": "DVDD",         "type": "power_in",-        "description": "Digital positive supply, 2.7V to 3.6V."+        "description": "Digital positive supply, 2.7V to 3.6V, and must never be more than 0.3V greater than AVDD."       },       {         "number": "6",         "name": "DGND",         "type": "power_in",-        "description": "Digital negative supply (ground); must be within 0.3V of AGND for normal operation."+        "description": "Digital negative supply (ground), which must be within 0.3V of AGND for normal operation."       },       {         "number": "7",@@ -115,37 +113,37 @@         "number": "11",         "name": "ML/I2S",         "type": "input",-        "description": "Software mode: serial interface latch signal, edge sensitive and latched on the rising edge; hardware mode: input audio data format select."+        "description": "In software mode it is the serial interface latch signal (data latched on rising edge); in hardware mode it selects the input audio data format."       },       {         "number": "12",         "name": "MC/IWL",         "type": "input",-        "description": "Software mode: serial control interface clock; hardware mode: audio data input word length select."+        "description": "In software mode it is the serial control interface clock; in hardware mode it selects the audio data input word length."       },       {         "number": "13",         "name": "MD/DM",         "type": "input",-        "description": "Software mode: serial interface data, sampled on the rising edge of MC/IWL; hardware mode: de-emphasis select (0 = off, 1 = on)."+        "description": "In software mode it is the serial interface data (sampled on rising edge of MC/IWL); in hardware mode it selects de-emphasis (0 = off, 1 = on)."       },       {         "number": "14",         "name": "MUTE",         "type": "bidirectional",-        "description": "DAC zero flag output or DAC mute input (0 = normal operation, 1 = mute DAC channels); output impedance is 10kOhm when used as an output."+        "description": "DAC zero flag output or DAC mute input; logic high soft-mutes the DACs, logic low disables automute, and when floating it outputs a weak high (10kOhm output impedance) when zero flags are raised."       },       {         "number": "15",         "name": "TESTREF",         "type": "output",-        "description": "Test reference analogue output, decoupled with 0.1uF (C8) per the recommended external components."+        "description": "Test reference analogue output, decoupled externally with 0.1uF per the recommended external components table."       },       {         "number": "16",         "name": "VREFN",         "type": "power_in",-        "description": "DAC negative supply/reference, specified as 0V (ground) with AGND."+        "description": "DAC negative reference supply, nominally 0V ground."       },       {         "number": "17",@@ -157,7 +155,7 @@         "number": "18",         "name": "VMID",         "type": "output",-        "description": "Midrail divider decoupling pin (VREFP/2 reference) requiring 10uF external decoupling."+        "description": "Midrail divider decoupling pin, requiring 10uF external decoupling; reference voltage is VREFP/2."       },       {         "number": "19",@@ -175,49 +173,49 @@         "number": "21",         "name": "VOUT1L",         "type": "output",-        "description": "DAC channel 1 left analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 1 left analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "22",         "name": "VOUT1R",         "type": "output",-        "description": "DAC channel 1 right analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 1 right analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "23",         "name": "VOUT2L",         "type": "output",-        "description": "DAC channel 2 left analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 2 left analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "24",         "name": "VOUT2R",         "type": "output",-        "description": "DAC channel 2 right analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 2 right analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "25",         "name": "VOUT3L",         "type": "output",-        "description": "DAC channel 3 left analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 3 left analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "26",         "name": "VOUT3R",         "type": "output",-        "description": "DAC channel 3 right analogue output; 0dBFS full scale is 1.0 x VREFP/5 Vrms into a 10kOhm, 50pF load."+        "description": "DAC channel 3 right analogue output, 1.0 x VREFP/5 Vrms at 0dBFs full scale."       },       {         "number": "27",         "name": "AGND",         "type": "power_in",-        "description": "Analogue negative supply and substrate connection; must be within 0.3V of DGND."+        "description": "Analogue negative supply and substrate connection, 0V."       },       {         "number": "28",         "name": "AVDD",         "type": "power_in",-        "description": "Analogue positive supply, 2.7V to 5.5V."+        "description": "Analogue positive supply, 2.7V to 5.5V, which also feeds the DAC analogue circuitry."       }     ],     "provenance": {@@ -231,11 +229,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The MPN given (WM8766GEDS) has no /V or /RV suffix. The ordering table lists WM8766GEDS/V and WM8766; Pin 16 (VREFN) and pin 17 (VREFP) supply ranges are taken from the Recommended Operating Conditions ; Pin 14 MUTE is typed bidirectional because the datasheet describes it as a digital input/output. The"+          "extractor flagged: The requested MPN WM8766GEDS does not appear exactly in the ordering table; the datasheet lists WM87; Pin 14 MUTE is listed as Digital input/output in the datasheet; its behaviour as input vs output dep; Pins 3 and 4 are listed as Digital input/output in the datasheet; they are inputs in slave mode and "         ],         "pages_sent": 35,-        "cost_usd": 0.1268,-        "at": "2026-11-12T17:47:13"+        "cost_usd": 0.1273,+        "at": "2026-11-13T00:34:56"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/60618a95d11993a6b564763e2e3cd42c.pdf",@@ -272,7 +270,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -290,13 +288,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "525df05d265557904c12034c2cd9029fe2867e35637d4e6f1e537370392d1401",-        "checked": "2026-11-12",+        "sha256": "55b294e6705ea6c482590783e9032ff45f55cf95e34c6d80b78e7d9f18c31f97",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DS (28-pin SSOP, DM007.E)",+      "package_code": "DS (28-lead SSOP, DM007.E, JEDEC MO-150 AH)",       "source_page": 35,       "D": {         "nom_mm": 10.2,@@ -1029,10 +1027,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "wm8766geds-rv-hero.glb",-    "wm8766geds-rv-hero.overlay.json",-    "wm8766geds-rv-etched.glb"+    "wm8766geds-rv-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Cirrus Logic Digital To Analog Converters (DACs), SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
wm8766geds-rv.lbr+14−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Cirrus Logic Digital To Analog Converters (DACs), SSOP-28. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SSOP-28_5.3x10.2mm_P0.65mm">   <description>SSOP-28, 5.3 x 10.2 mm, 0.65 mm pitch</description>@@ -106,6 +106,7 @@ </packages> <symbols> <symbol name="WM8766GEDS">+  <description>Cirrus Logic Digital To Analog Converters (DACs), SSOP-28. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="17.78" x2="12.7" y2="17.78" width="0.254" layer="94"/>   <wire x1="12.7" y1="17.78" x2="12.7" y2="-20.32" width="0.254" layer="94"/>   <wire x1="12.7" y1="-20.32" x2="-12.7" y2="-20.32" width="0.254" layer="94"/>@@ -144,7 +145,7 @@ </symbols> <devicesets> <deviceset name="WM8766GEDS" prefix="U">-  <description></description>+  <description>Cirrus Logic Digital To Analog Converters (DACs), SSOP-28. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="WM8766GEDS" x="0" y="0"/>   </gates>@@ -180,7 +181,17 @@         <connect gate="G$1" pin="VREFN" pad="16"/>         <connect gate="G$1" pin="TESTREF" pad="15"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="WM8766GEDS/RV" constant="no"/>+          <attribute name="MANUFACTURER" value="Cirrus Logic" constant="no"/>+          <attribute name="DATASHEET" value="https://datasheet.lcsc.com/datasheet/pdf/60618a95d11993a6b564763e2e3cd42c.pdf" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/wm8766geds-rv" constant="no"/>+          <attribute name="MOUSER_PN" value="238-WM8766GEDS/RV" constant="no"/>+          <attribute name="DIGIKEY_PN" value="WM8766GEDS/RV-ND" constant="no"/>+          <attribute name="LCSC_PN" value="C2802161" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>