component
WL2808E33-5
Public Made by Adomby adom
WILLSEMI Will Semicon Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWL2808E33-5
WILLSEMI Will Semicon · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
WL2808E33-5 from WILLSEMI Will Semicon, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the datasheet gives an operating supply range of 2.5V to 5.5V and an absolute maximum VIN range of -0.3V to 6.5V. |
| 2 | GND | power_in | Ground reference pin. |
| 3 | EN | input | Active-high enable pin; logic high threshold is 1.2V minimum and logic low is 0.4V maximum, with VEN limited to -0.3V to VIN. |
| 4 | NC | unconnected | Not connected. |
| 5 | VOUT | power_out | Regulated output pin; the output range is 1.2V to 3.3V and the absolute VOUT range is -0.3V to VIN. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WILLSEMI Will Semicon |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (factor of VOUT, VOUT≧2V) | VOUT | 0.98 | 1.02 | V | VOUT≧2V, IOUT=1mA | 3 | |
| Dropout Voltage | VDROP | 170 | 200 | mV | VOUT=2.8V, IOUT=200mA | 3 | |
| Dropout Voltage | VDROP | 250 | 300 | mV | VOUT=2.8V, IOUT=300mA | 3 | |
| Line Regulation | △VLINE | 0.01 | 0.15 | %/V | VIN=2.7~5.5V, IOUT=1mA | 3 | |
| Load Regulation | △VLoad | 20 | 35 | mV | VOUT=2.8V, IOUT=1~300mA | 3 | |
| Quiescent Current | IQ | 30 | 50 | μA | VOUT=2.8V, IOUT=0 | 3 | |
| Shut-down Current | ISHDN | 1 | μA | VEN=0V | 3 | ||
| EN logic high voltage | VENH | 1.2 | V | VIN=5.5V, IOUT=1mA | 3 | ||
| EN logic low voltage | VENL | 0.4 | V | VIN=5.5V, VOUT=0V | 3 | ||
| EN Input Current | IEN | 1 | μA | VEN= 0 to 5.5V | 3 | ||
| Short Current | ISHORT | 90 | mA | VEN=VIN, VOUT Short to GND with 1Ω | 3 | ||
| Power Supply Rejection Rate | PSRR | 75 | dB | VIN=(VOUT+1V)DC+0.5VP-P, F=217Hz, Iout=10mA | 3 | ||
| Power Supply Rejection Rate | PSRR | 65 | dB | VIN=(VOUT+1V)DC+0.5VP-P, F=10KHz, Iout=10mA | 3 | ||
| Output Noise Voltage | eNO | 100 | μVRMS | 10Hz to 100KHz, COUT=1μF | 3 | ||
| VIN Range | VIN | -0.3 | 6.5 | V | 3 | ||
| VEN Range | VEN | -0.3 | V | 3 | |||
| VOUT Range | VOUT | -0.3 | V | 3 | |||
| Lead Temperature Range | 260 | °C | 3 | ||||
| Storage Temperature Range | -55 | 150 | °C | 3 | |||
| Operating Junction Temperature Range | 150 | °C | 3 | ||||
| Operating Supply voltage | 2.5 | 5.5 | V | 3 | |||
| Operating Temperature Range | -40 | 85 | °C | 3 | |||
| Thermal Resistance, junction-to-ambient | RθJA | 250 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
WL2808E33-5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
wl2808e33-5-etched.step/wl2808e33-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wl2808e33-5.step/wl2808e33-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WILLSEMI Will Semicon datasheet (9 pp, sha256
332362e3f4478bf8, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).