← Commit history
README.md+27−43
@@ -8,22 +8,22 @@ WL2405 from WL, in a SOP-16. Pinout and pin descriptions extracted from the manu  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | ANT | passive | RF signal input/output (antenna) pin. |-| 2 | VCC | power_in | Power supply input; operating range 2.0V to 3.6V. |+| 1 | ANT | bidirectional | RF signal input and output pin for the 2.4 GHz antenna connection. |+| 2 | VCC | power_in | Power supply input; the operating voltage range is 2.0 V to 3.6 V and the chip only operates normally when VDD is above 1.7 V. | | 3 | PB5 | bidirectional | Bidirectional I/O pin that can output PWM4. |-| 4 | PA0 | bidirectional | Bidirectional I/O pin that can also be a comparator input and can output PWM2. |-| 5 | PA1 | bidirectional | Bidirectional I/O pin usable as comparator input, PWM5 output, or Timer3 clock source EX_CKI1. |-| 6 | VDD | power_in | Power supply input; operating range 2.0V to 3.6V. |-| 7 | PA7 | bidirectional | Bidirectional I/O pin usable as crystal output Xout or instruction clock output. |-| 8 | PA5 | bidirectional | Selectable as input or open-drain output pin; can serve as reset pin RSTb. |-| 9 | PA6 | bidirectional | Bidirectional I/O pin usable as crystal input Xin. |-| 10 | PA4 | bidirectional | Bidirectional I/O pin usable as PWM1 output, Timer0/1 external clock source EX_CKI0, or programming clock input SCK. |-| 11 | PA3 | bidirectional | Bidirectional I/O pin usable as comparator input, PWM3 output, or programming data output SDO. |-| 12 | PA2 | bidirectional | Bidirectional I/O pin usable as comparator input, PWM4 output, external interrupt 1 input INT1, or programming data input SDI. |-| 13 | VCC | power_in | Power supply input; operating range 2.0V to 3.6V. |-| 14 | XC1 | bidirectional | Crystal input pin. |-| 15 | XC2 | bidirectional | Crystal output pin. |-| 16 | VSS | power_in | Ground; 0V reference. |+| 4 | PA0 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input and can output PWM2. |+| 5 | PA1 | bidirectional | Bidirectional I/O pin that can serve as a comparator input, output PWM5, and act as the Timer3 clock source EX_CKI1. |+| 6 | VDD | power_in | Power supply input; the operating voltage range is 2.0 V to 3.6 V and the chip only operates normally when VDD is above 1.7 V. |+| 7 | PA7 | bidirectional | Bidirectional I/O pin that can serve as crystal oscillator output Xout or output the instruction clock. |+| 8 | PA5 | bidirectional | Bidirectional pin selectable as an input or an open-drain output, and can also serve as the reset pin RSTb. |+| 9 | PA6 | bidirectional | Bidirectional I/O pin that can serve as crystal oscillator input Xin. |+| 10 | PA4 | bidirectional | Bidirectional I/O pin that can output PWM1, serve as the Timer0/1 external clock source EX_CKI0, and act as the programming clock input SCK. |+| 11 | PA3 | bidirectional | Bidirectional I/O pin that can serve as a comparator input, output PWM3, and act as the programming data output SDO. |+| 12 | PA2 | bidirectional | Bidirectional I/O pin that can serve as a comparator input, output PWM4, serve as external interrupt 1 input INT1, and act as the programming data input SDI. |+| 13 | VCC | power_in | Power supply input; the operating voltage range is 2.0 V to 3.6 V and the chip only operates normally when VDD is above 1.7 V. |+| 14 | XC1 | bidirectional | Crystal oscillator input pin. |+| 15 | XC2 | bidirectional | Crystal oscillator output pin. |+| 16 | VSS | power_in | Ground reference pin for the chip. |  ## Key specifications @@ -40,33 +40,17 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage | VDD | 2 | 3 | 3.6 | V |  | 5 |-| Operating frequency | fOP | 2400 |  | 2483 | MHz | VCC = 3V±5%, TA=25℃ | 4 |-| Data rate | DR | 0.125 |  | 2 | Mbps | VCC = 3V±5%, TA=25℃ | 4 |-| Output power range | PRFC | -24 |  | 8 | dBm |  | 5 |-| Supply voltage (absolute maximum) | VDD | -0.3 |  | 3.6 | V |  | 6 |-| Input voltage (absolute maximum) | VI | -0.3 |  | 3.6 | V |  | 6 |-| Total power dissipation | Pd |  |  | 300 | mW | TA=-40℃~85℃ | 6 |-| Operating temperature | TOP | -40 |  | 125 | ℃ |  | 6 |-| Storage temperature | TSTG | -40 |  | 125 | ℃ |  | 6 |-| Sleep mode current | ICC |  | 2.6 |  | uA | 休眠模式; VCC = 3V±5%, TA=25℃ | 4 |-| Standby mode 1 current | ICC |  | 24.2 |  | uA | 待机模式 1; VCC = 3V±5%, TA=25℃ | 4 |-| Standby mode 2 current | ICC |  | 1.18 |  | mA | 待机模式 2; VCC = 3V±5%, TA=25℃ | 4 |-| TX current (-24dBm) | ICC |  | 9 |  | mA | 发射模式 (-24dBm) | 4 |-| TX current (-18dBm) | ICC |  | 9.5 |  | mA | 发射模式 (-18dBm) | 4 |-| TX current (0dBm) | ICC |  | 13.7 |  | mA | 发射模式 (0dBm) | 4 |-| TX current (2dBm) | ICC |  | 17 |  | mA | 发射模式 (2dBm) | 4 |-| TX current (8dBm) | ICC |  | 25 |  | mA | 发射模式 (8dBm) | 4 |-| RX current (250Kbps) | ICC |  | 12.3 |  | mA | 接收模式 (250Kbps) | 4 |-| RX current (1Mbps) | ICC |  | 12.3 |  | mA | 接收模式 (1Mbps) | 4 |-| RX current (2Mbps) | ICC |  | 12.3 |  | mA | 接收模式 (2Mbps) | 4 |-| Crystal frequency | fXTAL |  | 16 |  | MHz |  | 4 |-| PLL frequency step | PLLres |  | 1 |  | MHz |  | 4 |-| Typical output power | PRF |  | 0 |  | dBm |  | 5 |-| Receive sensitivity @125Kbps | RXSENS1 |  | -96.5 |  | dBm | 0.1%BER | 5 |-| Receive sensitivity @250Kbps | RXSENS2 |  | -95 |  | dBm | 0.1%BER | 5 |-| Receive sensitivity @1Mbps | RXSENS3 |  | -92 |  | dBm | 0.1%BER | 5 |-| Receive sensitivity @2Mbps | RXSENS4 |  | -90 |  | dBm | 0.1%BER | 5 |+| fOP 工作频率 | fOP | 2400 |  | 2483 | MHz |  | 4 |+| DR 码率 | DR | 0.125 |  | 2 | Mbps |  | 4 |+| ∆f250K 调制频偏 | ∆f250K | 160 |  | 250 | KHz | @250Kbps | 4 |+| ∆f1M 调制频偏 | ∆f1M | 160 |  | 250 | KHz | @1Mbps | 4 |+| PRFC 输出功率范围 | PRFC | -24 |  | 8 | dBm |  | 5 |+| VDD 供电电压 | VDD | 2 | 3 | 3.6 | V |  | 5 |+| VDD 供电电压 (absolute maximum) | VDD | -0.3 |  | 3.6 | V |  | 6 |+| VI 输入电压 | VI | -0.3 |  | 3.6 | V |  | 6 |+| Pd 总功耗 | Pd |  |  | 300 | mW | TA=-40℃~85℃ | 6 |+| TOP 工作温度 | TOP | -40 |  | 125 | ℃ |  | 6 |+| TSTG 存储温度 | TSTG | -40 |  | 125 | ℃ |  | 6 |  ## CAD (KiCad official) @@ -81,7 +65,7 @@ Data extracted from the manufacturer datasheet, not a distributor listing:  - **Datasheet:** [WL datasheet](docs/wl2405-datasheet.pdf) (10 pp, sha256 `f82a783f374b5d1e`, retrieved 2026-11-12, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/wl2405-datasheet.pdf)
package.json+23−23
@@ -1,6 +1,6 @@ {   "slug": "wl2405",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "WL RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,7 +52,7 @@       "lcsc": "C2828597"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:56:26Z",+      "checked_at": "2026-11-12T07:58:14Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -67,14 +67,14 @@       {         "number": "1",         "name": "ANT",-        "type": "passive",-        "description": "RF signal input/output (antenna) pin."+        "type": "bidirectional",+        "description": "RF signal input and output pin for the 2.4 GHz antenna connection."       },       {         "number": "2",         "name": "VCC",         "type": "power_in",-        "description": "Power supply input; operating range 2.0V to 3.6V."+        "description": "Power supply input; the operating voltage range is 2.0 V to 3.6 V and the chip only operates normally when VDD is above 1.7 V."       },       {         "number": "3",@@ -86,79 +86,79 @@         "number": "4",         "name": "PA0",         "type": "bidirectional",-        "description": "Bidirectional I/O pin that can also be a comparator input and can output PWM2."+        "description": "Bidirectional I/O pin that can also serve as a comparator input and can output PWM2."       },       {         "number": "5",         "name": "PA1",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as comparator input, PWM5 output, or Timer3 clock source EX_CKI1."+        "description": "Bidirectional I/O pin that can serve as a comparator input, output PWM5, and act as the Timer3 clock source EX_CKI1."       },       {         "number": "6",         "name": "VDD",         "type": "power_in",-        "description": "Power supply input; operating range 2.0V to 3.6V."+        "description": "Power supply input; the operating voltage range is 2.0 V to 3.6 V and the chip only operates normally when VDD is above 1.7 V."       },       {         "number": "7",         "name": "PA7",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as crystal output Xout or instruction clock output."+        "description": "Bidirectional I/O pin that can serve as crystal oscillator output Xout or output the instruction clock."       },       {         "number": "8",         "name": "PA5",         "type": "bidirectional",-        "description": "Selectable as input or open-drain output pin; can serve as reset pin RSTb."+        "description": "Bidirectional pin selectable as an input or an open-drain output, and can also serve as the reset pin RSTb."       },       {         "number": "9",         "name": "PA6",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as crystal input Xin."+        "description": "Bidirectional I/O pin that can serve as crystal oscillator input Xin."       },       {         "number": "10",         "name": "PA4",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as PWM1 output, Timer0/1 external clock source EX_CKI0, or programming clock input SCK."+        "description": "Bidirectional I/O pin that can output PWM1, serve as the Timer0/1 external clock source EX_CKI0, and act as the programming clock input SCK."       },       {         "number": "11",         "name": "PA3",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as comparator input, PWM3 output, or programming data output SDO."+        "description": "Bidirectional I/O pin that can serve as a comparator input, output PWM3, and act as the programming data output SDO."       },       {         "number": "12",         "name": "PA2",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as comparator input, PWM4 output, external interrupt 1 input INT1, or programming data input SDI."+        "description": "Bidirectional I/O pin that can serve as a comparator input, output PWM4, serve as external interrupt 1 input INT1, and act as the programming data input SDI."       },       {         "number": "13",         "name": "VCC",         "type": "power_in",-        "description": "Power supply input; operating range 2.0V to 3.6V."+        "description": "Power supply input; the operating voltage range is 2.0 V to 3.6 V and the chip only operates normally when VDD is above 1.7 V."       },       {         "number": "14",         "name": "XC1",         "type": "bidirectional",-        "description": "Crystal input pin."+        "description": "Crystal oscillator input pin."       },       {         "number": "15",         "name": "XC2",         "type": "bidirectional",-        "description": "Crystal output pin."+        "description": "Crystal oscillator output pin."       },       {         "number": "16",         "name": "VSS",         "type": "power_in",-        "description": "Ground; 0V reference."+        "description": "Ground reference pin for the chip."       }     ],     "provenance": {@@ -166,17 +166,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Datasheet lists the pin type for ANT as 'A' (analog RF I/O); mapped to passive as a best fit.; Datasheet lists two VCC pins (2, 13) and a separate VDD pin (6), all as power inputs, without explai; XC1/XC2 are listed as I/O crystal pins, while PA6/PA7 are also given as Xin/Xout; the datasheet does"+          "extractor flagged: The datasheet names the supply pins VCC (pins 2 and 13) and VDD (pin 6) inconsistently; the 2.0 V to; The datasheet labels XC1 and XC2 as I/O for crystal input/output; they are typed bidirectional as pr; The datasheet gives no electrical limits for the ANT RF pin beyond the function described; the type "         ],         "pages_sent": 10,-        "cost_usd": 0.0748,-        "at": "2026-11-12T04:56:07"+        "cost_usd": 0.0419,+        "at": "2026-11-12T07:57:41"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/161ba52e3541f86768d38c972c26be4f.pdf",@@ -231,7 +231,7 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "a0c4f7600612eb3038224a9e2f6c0462822ed25e2a20b9d710cb88afc4326e59",+        "sha256": "b843573005e316524527d9c7b15d7cd48ce3d88d2e19cccd67d70d4c313f3cb5",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }
page.json+26−24
@@ -4,7 +4,7 @@   "slug": "wl2405",   "title": "WL2405",   "brief": "WL RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C2828597"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:56:26Z",+      "checked_at": "2026-11-12T07:58:14Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -49,14 +49,14 @@       {         "number": "1",         "name": "ANT",-        "type": "passive",-        "description": "RF signal input/output (antenna) pin."+        "type": "bidirectional",+        "description": "RF signal input and output pin for the 2.4 GHz antenna connection."       },       {         "number": "2",         "name": "VCC",         "type": "power_in",-        "description": "Power supply input; operating range 2.0V to 3.6V."+        "description": "Power supply input; the operating voltage range is 2.0 V to 3.6 V and the chip only operates normally when VDD is above 1.7 V."       },       {         "number": "3",@@ -68,79 +68,79 @@         "number": "4",         "name": "PA0",         "type": "bidirectional",-        "description": "Bidirectional I/O pin that can also be a comparator input and can output PWM2."+        "description": "Bidirectional I/O pin that can also serve as a comparator input and can output PWM2."       },       {         "number": "5",         "name": "PA1",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as comparator input, PWM5 output, or Timer3 clock source EX_CKI1."+        "description": "Bidirectional I/O pin that can serve as a comparator input, output PWM5, and act as the Timer3 clock source EX_CKI1."       },       {         "number": "6",         "name": "VDD",         "type": "power_in",-        "description": "Power supply input; operating range 2.0V to 3.6V."+        "description": "Power supply input; the operating voltage range is 2.0 V to 3.6 V and the chip only operates normally when VDD is above 1.7 V."       },       {         "number": "7",         "name": "PA7",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as crystal output Xout or instruction clock output."+        "description": "Bidirectional I/O pin that can serve as crystal oscillator output Xout or output the instruction clock."       },       {         "number": "8",         "name": "PA5",         "type": "bidirectional",-        "description": "Selectable as input or open-drain output pin; can serve as reset pin RSTb."+        "description": "Bidirectional pin selectable as an input or an open-drain output, and can also serve as the reset pin RSTb."       },       {         "number": "9",         "name": "PA6",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as crystal input Xin."+        "description": "Bidirectional I/O pin that can serve as crystal oscillator input Xin."       },       {         "number": "10",         "name": "PA4",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as PWM1 output, Timer0/1 external clock source EX_CKI0, or programming clock input SCK."+        "description": "Bidirectional I/O pin that can output PWM1, serve as the Timer0/1 external clock source EX_CKI0, and act as the programming clock input SCK."       },       {         "number": "11",         "name": "PA3",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as comparator input, PWM3 output, or programming data output SDO."+        "description": "Bidirectional I/O pin that can serve as a comparator input, output PWM3, and act as the programming data output SDO."       },       {         "number": "12",         "name": "PA2",         "type": "bidirectional",-        "description": "Bidirectional I/O pin usable as comparator input, PWM4 output, external interrupt 1 input INT1, or programming data input SDI."+        "description": "Bidirectional I/O pin that can serve as a comparator input, output PWM4, serve as external interrupt 1 input INT1, and act as the programming data input SDI."       },       {         "number": "13",         "name": "VCC",         "type": "power_in",-        "description": "Power supply input; operating range 2.0V to 3.6V."+        "description": "Power supply input; the operating voltage range is 2.0 V to 3.6 V and the chip only operates normally when VDD is above 1.7 V."       },       {         "number": "14",         "name": "XC1",         "type": "bidirectional",-        "description": "Crystal input pin."+        "description": "Crystal oscillator input pin."       },       {         "number": "15",         "name": "XC2",         "type": "bidirectional",-        "description": "Crystal output pin."+        "description": "Crystal oscillator output pin."       },       {         "number": "16",         "name": "VSS",         "type": "power_in",-        "description": "Ground; 0V reference."+        "description": "Ground reference pin for the chip."       }     ],     "provenance": {@@ -148,17 +148,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Datasheet lists the pin type for ANT as 'A' (analog RF I/O); mapped to passive as a best fit.; Datasheet lists two VCC pins (2, 13) and a separate VDD pin (6), all as power inputs, without explai; XC1/XC2 are listed as I/O crystal pins, while PA6/PA7 are also given as Xin/Xout; the datasheet does"+          "extractor flagged: The datasheet names the supply pins VCC (pins 2 and 13) and VDD (pin 6) inconsistently; the 2.0 V to; The datasheet labels XC1 and XC2 as I/O for crystal input/output; they are typed bidirectional as pr; The datasheet gives no electrical limits for the ANT RF pin beyond the function described; the type "         ],         "pages_sent": 10,-        "cost_usd": 0.0748,-        "at": "2026-11-12T04:56:07"+        "cost_usd": 0.0419,+        "at": "2026-11-12T07:57:41"       },       "datasheet": {         "url": "https://datasheet.lcsc.com/datasheet/pdf/161ba52e3541f86768d38c972c26be4f.pdf",@@ -213,7 +213,7 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "a0c4f7600612eb3038224a9e2f6c0462822ed25e2a20b9d710cb88afc4326e59",+        "sha256": "b843573005e316524527d9c7b15d7cd48ce3d88d2e19cccd67d70d4c313f3cb5",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }@@ -645,5 +645,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "WL RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
wl2405-hero.overlay.json+439−434
@@ -1,436 +1,441 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "WL2405",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 16,-      "span_mm": 9.49,-      "dash_mm": 0.2372,-      "gap_mm": 0.1424,-      "pad_stroke_mm": 0.0569-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 16,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.759,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.0,-      3.0,-      -4.65,-      4.65-    ],-    "pads_bbox_mm": [-      -3.45,-      3.45,-      -4.745,-      4.745-    ],-    "seating_z_mm": 0.0-  },-  "sources": {-    "glb": "wl2405-etched.glb",-    "glb_sha256": "04cdd5757804ee072b58b088e87792647876d9f0455f0e17aebfca91797cf50e",-    "footprint": "wl2405.kicad_mod",-    "footprint_sha256": "f9b5075740f7816c540ae1137f025d659beaec522ed7b86b1a5274cc9a2d8a25",-    "pins": "page.json component.pins",-    "pins_sha256": "81177c48911cc900be79fee5631e6dbb338f1d9497735a58e3df7d63a988178f"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "ANT",-      "x": -3.6,-      "y": -4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "VCC",-      "x": -3.6,-      "y": -3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "PB5",-      "x": -3.6,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "PA0",-      "x": -3.6,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "PA1",-      "x": -3.6,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "VDD",-      "x": -3.6,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "PA7",-      "x": -3.6,-      "y": 3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "PA5",-      "x": -3.6,-      "y": 4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "PA6",-      "x": 3.6,-      "y": 4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "PA4",-      "x": 3.6,-      "y": 3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "PA3",-      "x": 3.6,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "PA2",-      "x": 3.6,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "VCC",-      "x": 3.6,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "XC1",-      "x": 3.6,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "15",-      "text": "XC2",-      "x": 3.6,-      "y": -3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "16",-      "text": "VSS",-      "x": 3.6,-      "y": -4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+ "spec": "adom-hero 1.4",+ "mpn": "WL2405",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 16,+   "span_mm": 9.49,+   "dash_mm": 0.2373,+   "gap_mm": 0.1424,+   "pad_stroke_mm": 0.0569+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 16,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.759,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.0,+   3.0,+   -4.65,+   4.65+  ],+  "pads_bbox_mm": [+   -3.45,+   3.45,+   -4.745,+   4.745   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -4.445-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -3.175-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        3.175-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        4.445-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        4.445-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        3.175-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -3.175-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -4.445-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "wl2405-etched.glb",+  "glb_sha256": "04cdd5757804ee072b58b088e87792647876d9f0455f0e17aebfca91797cf50e",+  "footprint": "wl2405.kicad_mod",+  "footprint_sha256": "f9b5075740f7816c540ae1137f025d659beaec522ed7b86b1a5274cc9a2d8a25",+  "pins": "page.json component.pins",+  "pins_sha256": "81177c48911cc900be79fee5631e6dbb338f1d9497735a58e3df7d63a988178f"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "ANT",+   "x": -3.6,+   "y": -4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "VCC",+   "x": -3.6,+   "y": -3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "PB5",+   "x": -3.6,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "PA0",+   "x": -3.6,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "PA1",+   "x": -3.6,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "VDD",+   "x": -3.6,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "PA7",+   "x": -3.6,+   "y": 3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "PA5",+   "x": -3.6,+   "y": 4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "PA6",+   "x": 3.6,+   "y": 4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "PA4",+   "x": 3.6,+   "y": 3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "PA3",+   "x": 3.6,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "PA2",+   "x": 3.6,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "VCC",+   "x": 3.6,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "XC1",+   "x": 3.6,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "15",+   "text": "XC2",+   "x": 3.6,+   "y": -3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "16",+   "text": "VSS",+   "x": 3.6,+   "y": -4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -4.445+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -3.175+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    3.175+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    4.445+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    4.445+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    3.175+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -3.175+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -4.445+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
wl2405.kicad_sym+1−1
@@ -8,7 +8,7 @@       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "WL2405_1_1"-    (pin passive line (at -17.78 7.62 0) (length 5.08)+    (pin bidirectional line (at -17.78 7.62 0) (length 5.08)       (name "ANT" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )
wl2405.lbr+1−1
@@ -101,7 +101,7 @@   <wire x1="-12.7" y1="-12.7" x2="-12.7" y2="10.16" width="0.254" layer="94"/>   <text x="0.0000" y="12.7000" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-15.2400" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="ANT" x="-17.78" y="7.62" length="middle" direction="pas"/>+  <pin name="ANT" x="-17.78" y="7.62" length="middle" direction="io"/>   <pin name="VCC" x="-17.78" y="5.08" length="middle" direction="pwr"/>   <pin name="PB5" x="-17.78" y="2.54" length="middle" direction="io"/>   <pin name="PA0" x="-17.78" y="0" length="middle" direction="io"/>