← Commit history
Publish 0.1.3
5 files changed
+77−122
README.md+26−73@@ -8,22 +8,22 @@ WL2405 from WL, in a SOP-16. Pinout and pin descriptions extracted from the manu | Pin | Name | Type | Function | |---|---|---|---|-| 1 | ANT | bidirectional | RF signal input and output pin for the antenna (射频信号输入输出). |-| 2 | VCC | power_in | Power supply input; the device operates over 2.0 V to 3.6 V. |+| 1 | ANT | passive | RF signal input/output (antenna port, marked 'A' in the datasheet pin table); no voltage or impedance limits are given for this pin. |+| 2 | VCC | power_in | Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V. | | 3 | PB5 | bidirectional | Bidirectional I/O pin that can also output PWM4. | | 4 | PA0 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input and output PWM2. |-| 5 | PA1 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input, output PWM5, and provide the Timer3 clock source EX_CKI1. |-| 6 | VDD | power_in | Power supply input; the device operates over 2.0 V to 3.6 V. |-| 7 | PA7 | bidirectional | Bidirectional I/O pin that can also serve as crystal oscillator output Xout or as instruction clock output. |-| 8 | PA5 | bidirectional | Bidirectional pin selectable as input or open-drain output, and can also serve as reset pin RSTb. |-| 9 | PA6 | bidirectional | Bidirectional I/O pin that can also serve as crystal oscillator input Xin. |-| 10 | PA4 | bidirectional | Bidirectional I/O pin that can also output PWM1, serve as Timer0/1 external clock source EX_CKI0, and act as programming clock input SCK. |-| 11 | PA3 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input, output PWM3, and act as programming data output SDO. |-| 12 | PA2 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input, output PWM4, external interrupt 1 input INT1, and programming data input SDI. |-| 13 | VCC | power_in | Power supply input; the device operates over 2.0 V to 3.6 V. |-| 14 | XC1 | bidirectional | Crystal oscillator input pin (晶振输入). |-| 15 | XC2 | bidirectional | Crystal oscillator output pin (晶振输出). |-| 16 | VSS | power_in | Ground pin (chip ground, 0 V). |+| 5 | PA1 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input, output PWM5, and act as the Timer3 clock source EX_CKI1. |+| 6 | VDD | power_in | Power supply input; the datasheet gives the operating supply as 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V, and the chip operates normally above 1.7 V. |+| 7 | PA7 | bidirectional | Bidirectional I/O pin that can also serve as crystal output Xout or as instruction clock output. |+| 8 | PA5 | bidirectional | I/O pin selectable as an input or open-drain output, which can also be used as the reset pin RSTb. |+| 9 | PA6 | bidirectional | Bidirectional I/O pin that can also serve as crystal input Xin. |+| 10 | PA4 | bidirectional | Bidirectional I/O pin that can also output PWM1, serve as Timer0/1 external clock source EX_CKI0, or act as programming clock input SCK. |+| 11 | PA3 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input, output PWM3, or act as programming data output SDO. |+| 12 | PA2 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input, output PWM4, external interrupt 1 input INT1, or programming data input SDI. |+| 13 | VCC | power_in | Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V. |+| 14 | XC1 | bidirectional | Crystal oscillator input pin, listed as I/O in the datasheet pin table. |+| 15 | XC2 | bidirectional | Crystal oscillator output pin, listed as I/O in the datasheet pin table. |+| 16 | VSS | power_in | Ground (chip ground), 0 V reference. | ## Key specifications @@ -40,64 +40,17 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| 工作频率 fOP | fOP | 2400 | | 2483 | MHz | | 4 |-| 码率 DR | DR | 0.125 | | 2 | Mbps | | 4 |-| 调制频偏@250Kbps | ∆f250K | 160 | | 250 | KHz | @250Kbps | 4 |-| 调制频偏@1Mbps | ∆f1M | 160 | | 250 | KHz | @1Mbps | 4 |-| 输出功率范围 | PRFC | -24 | | 8 | dBm | | 5 |-| 供电电压 VDD (recommended) | VDD | 2 | 3 | 3.6 | V | | 5 |-| 供电电压 VDD (absolute maximum) | VDD | -0.3 | | 3.6 | V | | 6 |-| 输入电压 | VI | -0.3 | | 3.6 | V | | 6 |-| 总功耗 | Pd | | | 300 | mW | TA=-40℃~85℃ | 6 |-| 工作温度 | TOP | -40 | | 125 | ℃ | | 6 |-| 存储温度 | TSTG | -40 | | 125 | ℃ | | 6 |-| 芯片地 VSS | VSS | | 0 | | V | | 5 |-| ICC 休眠模式 | ICC | | 2.6 | | uA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 待机模式 1 | ICC | | 24.2 | | uA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 待机模式 2 | ICC | | 1.18 | | mA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 发射模式 (-24dBm) | ICC | | 9 | | mA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 发射模式 (-18dBm) | ICC | | 9.5 | | mA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 发射模式 (0dBm) | ICC | | 13.7 | | mA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 发射模式 (2dBm) | ICC | | 17 | | mA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 发射模式 (8dBm) | ICC | | 25 | | mA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 接收模式 (250Kbps) | ICC | | 12.3 | | mA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 接收模式 (1Mbps) | ICC | | 12.3 | | mA | VCC = 3V±5%, TA=25℃ | 4 |-| ICC 接收模式 (2Mbps) | ICC | | 12.3 | | mA | VCC = 3V±5%, TA=25℃ | 4 |-| 锁相环频率步径 | PLLres | | 1 | | MHz | | 4 |-| 晶振频率 | fXTAL | | 16 | | MHz | | 4 |-| 调制频偏@2Mbps | ∆f2M | | 320 | | KHz | @2Mbps | 4 |-| 频道间隔@250Kbps | FCH250K | | 1 | | MHz | @250Kbps | 4 |-| 频道间隔@1Mbps | FCH1M | | 1 | | MHz | @1Mbps | 4 |-| 频道间隔@2Mbps | FCH2M | | 2 | | MHz | @2Mbps | 4 |-| 典型输出功率 | PRF | | 0 | | dBm | | 5 |-| 20dB 带宽 (250Kbps) | PBW1 | | 1 | | MHz | @250Kbps | 5 |-| 20dB 带宽 (1Mbps) | PBW2 | | 1 | | MHz | @1Mbps | 5 |-| 20dB 带宽 (2Mbps) | PBW3 | | 2 | | MHz | @2Mbps | 5 |-| 最大接收幅度 | RXmax | | 0 | | dBm | BER<0.1% | 5 |-| 接收灵敏度 @125Kbps | RXSENS1 | | -96.5 | | dBm | 0.1%BER@125Kbps | 5 |-| 接收灵敏度 @250Kbps | RXSENS2 | | -95 | | dBm | 0.1%BER@250Kbps | 5 |-| 接收灵敏度 @1Mbps | RXSENS3 | | -92 | | dBm | 0.1%BER@1Mbps | 5 |-| 接收灵敏度 @2Mbps | RXSENS4 | | -90 | | dBm | 0.1%BER@2Mbps | 5 |-| 同频通道选择性@250kbps | C/ΙCO | | 8 | | dBc | @250kbps | 5 |-| 第1相邻道选择性@250kbps | C/Ι1ST | | -8 | | dBc | @250kbps | 5 |-| 第2相邻道选择性@250kbps | C/Ι2ND | | -18 | | dBc | @250kbps | 5 |-| 第3相邻道选择性@250kbps | C/Ι3RD | | -24 | | dBc | @250kbps | 5 |-| 第4相邻道选择性@250kbps | C/Ι4TH | | -28 | | dBc | @250kbps | 5 |-| 第5相邻道选择性@250kbps | C/Ι5TH | | -32 | | dBc | @250kbps | 5 |-| 第6相邻道选择性@250kbps | C/Ι6TH | | -35 | | dBc | @250kbps | 5 |-| 同频通道选择性@1Mbps | C/ΙCO | | 10 | | dBc | @1Mbps | 5 |-| 第1相邻道选择性@1Mbps | C/Ι1ST | | 1 | | dBc | @1Mbps | 5 |-| 第2相邻道选择性@1Mbps | C/Ι2ND | | -18 | | dBc | @1Mbps | 5 |-| 第3相邻道选择性@1Mbps | C/Ι3RD | | -23 | | dBc | @1Mbps | 5 |-| 第4相邻道选择性@1Mbps | C/Ι4TH | | -28 | | dBc | @1Mbps | 5 |-| 第5相邻道选择性@1Mbps | C/Ι5TH | | -32 | | dBc | @1Mbps | 5 |-| 第6相邻道选择性@1Mbps | C/Ι6TH | | -35 | | dBc | @1Mbps | 5 |-| 同频通道选择性@2Mbps | C/ΙCO | | 10 | | dBc | @2Mbps | 5 |-| 第1相邻道选择性@2Mbps | C/Ι1ST | | -6 | | dBc | @2Mbps | 5 |-| 第2相邻道选择性@2Mbps | C/Ι2ND | | -10 | | dBc | @2Mbps | 5 |-| 第3相邻道选择性@2Mbps | C/Ι3RD | | -22 | | dBc | @2Mbps | 5 |-| 第4相邻道选择性@2Mbps | C/Ι4TH | | -28 | | dBc | @2Mbps | 5 |-| 第5相邻道选择性@2Mbps | C/Ι5TH | | -34 | | dBc | @2Mbps | 5 |+| 工作频率 (operating frequency) | fOP | 2400 | | 2483 | MHz | VCC = 3V±5%, TA=25℃ | 4 |+| 码率 (data rate) | DR | 0.125 | | 2 | Mbps | VCC = 3V±5%, TA=25℃ | 4 |+| 调制频偏@250Kbps | ∆f250K | 160 | | 250 | KHz | VCC = 3V±5%, TA=25℃ | 4 |+| 调制频偏@1Mbps | ∆f1M | 160 | | 250 | KHz | VCC = 3V±5%, TA=25℃ | 4 |+| 输出功率范围 (output power range) | PRFC | -24 | | 8 | dBm | VCC = 3V±5%, TA=25℃ | 5 |+| 供电电压 (supply voltage VDD) | VDD | 2 | 3 | 3.6 | V | VCC = 3V±5%, TA=25℃ | 5 |+| 供电电压 (supply voltage VDD) | VDD | -0.3 | | 3.6 | V | | 6 |+| 输入电压 (input voltage VI) | VI | -0.3 | | 3.6 | V | | 6 |+| 总功耗 (total power dissipation) | Pd | | | 300 | mW | TA=-40℃~85℃ | 6 |+| 工作温度 (operating temperature TOP) | TOP | -40 | | 125 | ℃ | | 6 |+| 存储温度 (storage temperature TSTG) | TSTG | -40 | | 125 | ℃ | | 6 | ## CAD (KiCad official) @@ -110,7 +63,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [WL datasheet](docs/wl2405-datasheet.pdf) (10 pp, sha256 `f82a783f374b5d1e`, retrieved 2026-11-13, tier: lcsc)+- **Datasheet:** [WL datasheet](docs/wl2405-datasheet.pdf) (10 pp, sha256 `f82a783f374b5d1e`, retrieved 2026-11-17, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original. - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+23−23@@ -1,6 +1,6 @@ { "slug": "wl2405",- "version": "0.1.2",+ "version": "0.1.3", "type": "component", "description": "WL RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -51,7 +51,7 @@ "lcsc": "C2828597" }, "distributor_check": {- "checked_at": "2026-11-13T00:29:39Z",+ "checked_at": "2026-11-17T19:24:13Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -66,14 +66,14 @@ { "number": "1", "name": "ANT",- "type": "bidirectional",- "description": "RF signal input and output pin for the antenna (射频信号输入输出)."+ "type": "passive",+ "description": "RF signal input/output (antenna port, marked 'A' in the datasheet pin table); no voltage or impedance limits are given for this pin." }, { "number": "2", "name": "VCC", "type": "power_in",- "description": "Power supply input; the device operates over 2.0 V to 3.6 V."+ "description": "Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V." }, { "number": "3",@@ -91,73 +91,73 @@ "number": "5", "name": "PA1", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM5, and provide the Timer3 clock source EX_CKI1."+ "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM5, and act as the Timer3 clock source EX_CKI1." }, { "number": "6", "name": "VDD", "type": "power_in",- "description": "Power supply input; the device operates over 2.0 V to 3.6 V."+ "description": "Power supply input; the datasheet gives the operating supply as 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V, and the chip operates normally above 1.7 V." }, { "number": "7", "name": "PA7", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as crystal oscillator output Xout or as instruction clock output."+ "description": "Bidirectional I/O pin that can also serve as crystal output Xout or as instruction clock output." }, { "number": "8", "name": "PA5", "type": "bidirectional",- "description": "Bidirectional pin selectable as input or open-drain output, and can also serve as reset pin RSTb."+ "description": "I/O pin selectable as an input or open-drain output, which can also be used as the reset pin RSTb." }, { "number": "9", "name": "PA6", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as crystal oscillator input Xin."+ "description": "Bidirectional I/O pin that can also serve as crystal input Xin." }, { "number": "10", "name": "PA4", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also output PWM1, serve as Timer0/1 external clock source EX_CKI0, and act as programming clock input SCK."+ "description": "Bidirectional I/O pin that can also output PWM1, serve as Timer0/1 external clock source EX_CKI0, or act as programming clock input SCK." }, { "number": "11", "name": "PA3", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM3, and act as programming data output SDO."+ "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM3, or act as programming data output SDO." }, { "number": "12", "name": "PA2", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM4, external interrupt 1 input INT1, and programming data input SDI."+ "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM4, external interrupt 1 input INT1, or programming data input SDI." }, { "number": "13", "name": "VCC", "type": "power_in",- "description": "Power supply input; the device operates over 2.0 V to 3.6 V."+ "description": "Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V." }, { "number": "14", "name": "XC1", "type": "bidirectional",- "description": "Crystal oscillator input pin (晶振输入)."+ "description": "Crystal oscillator input pin, listed as I/O in the datasheet pin table." }, { "number": "15", "name": "XC2", "type": "bidirectional",- "description": "Crystal oscillator output pin (晶振输出)."+ "description": "Crystal oscillator output pin, listed as I/O in the datasheet pin table." }, { "number": "16", "name": "VSS", "type": "power_in",- "description": "Ground pin (chip ground, 0 V)."+ "description": "Ground (chip ground), 0 V reference." } ], "provenance": {@@ -171,11 +171,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet's pin table gives no electrical type for ANT, XC1 and XC2; they are typed bidirectiona; The datasheet names both VCC (pins 2 and 13) and VDD (pin 6) as power inputs; the text does not stat; The 2.0 V to 3.6 V supply range is stated for VDD in the operating conditions table and in the featu"+ "extractor flagged: The datasheet lists the ANT pin type as 'A' (analog/RF), which is not a KiCad ERC class; 'passive' w; Both pins are labeled VCC in the table while pin 6 is labeled VDD. The datasheet gives the supply ra; The datasheet types XC1 and XC2 as I/O and describes them as crystal input and output. Kept as bidir" ], "pages_sent": 10,- "cost_usd": 0.0421,- "at": "2026-11-13T00:29:25"+ "cost_usd": 0.0412,+ "at": "2026-11-17T19:22:21" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/161ba52e3541f86768d38c972c26be4f.pdf",@@ -212,7 +212,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -230,8 +230,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "6c198221201191c52aefb246986774488e1dd2352710cea8c33a928a49c30c58",- "checked": "2026-11-13",+ "sha256": "2b646b2b3efeee5f453facadda5c9f16f5d94e57e5b516d79d8422e5e7c7a5e2",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+26−24@@ -4,7 +4,7 @@ "slug": "wl2405", "title": "WL2405", "brief": "WL RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.2",+ "version": "0.1.3", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "lcsc": "C2828597" }, "distributor_check": {- "checked_at": "2026-11-13T00:29:39Z",+ "checked_at": "2026-11-17T19:24:13Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": null,@@ -49,14 +49,14 @@ { "number": "1", "name": "ANT",- "type": "bidirectional",- "description": "RF signal input and output pin for the antenna (射频信号输入输出)."+ "type": "passive",+ "description": "RF signal input/output (antenna port, marked 'A' in the datasheet pin table); no voltage or impedance limits are given for this pin." }, { "number": "2", "name": "VCC", "type": "power_in",- "description": "Power supply input; the device operates over 2.0 V to 3.6 V."+ "description": "Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V." }, { "number": "3",@@ -74,73 +74,73 @@ "number": "5", "name": "PA1", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM5, and provide the Timer3 clock source EX_CKI1."+ "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM5, and act as the Timer3 clock source EX_CKI1." }, { "number": "6", "name": "VDD", "type": "power_in",- "description": "Power supply input; the device operates over 2.0 V to 3.6 V."+ "description": "Power supply input; the datasheet gives the operating supply as 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V, and the chip operates normally above 1.7 V." }, { "number": "7", "name": "PA7", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as crystal oscillator output Xout or as instruction clock output."+ "description": "Bidirectional I/O pin that can also serve as crystal output Xout or as instruction clock output." }, { "number": "8", "name": "PA5", "type": "bidirectional",- "description": "Bidirectional pin selectable as input or open-drain output, and can also serve as reset pin RSTb."+ "description": "I/O pin selectable as an input or open-drain output, which can also be used as the reset pin RSTb." }, { "number": "9", "name": "PA6", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as crystal oscillator input Xin."+ "description": "Bidirectional I/O pin that can also serve as crystal input Xin." }, { "number": "10", "name": "PA4", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also output PWM1, serve as Timer0/1 external clock source EX_CKI0, and act as programming clock input SCK."+ "description": "Bidirectional I/O pin that can also output PWM1, serve as Timer0/1 external clock source EX_CKI0, or act as programming clock input SCK." }, { "number": "11", "name": "PA3", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM3, and act as programming data output SDO."+ "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM3, or act as programming data output SDO." }, { "number": "12", "name": "PA2", "type": "bidirectional",- "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM4, external interrupt 1 input INT1, and programming data input SDI."+ "description": "Bidirectional I/O pin that can also serve as a comparator input, output PWM4, external interrupt 1 input INT1, or programming data input SDI." }, { "number": "13", "name": "VCC", "type": "power_in",- "description": "Power supply input; the device operates over 2.0 V to 3.6 V."+ "description": "Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V." }, { "number": "14", "name": "XC1", "type": "bidirectional",- "description": "Crystal oscillator input pin (晶振输入)."+ "description": "Crystal oscillator input pin, listed as I/O in the datasheet pin table." }, { "number": "15", "name": "XC2", "type": "bidirectional",- "description": "Crystal oscillator output pin (晶振输出)."+ "description": "Crystal oscillator output pin, listed as I/O in the datasheet pin table." }, { "number": "16", "name": "VSS", "type": "power_in",- "description": "Ground pin (chip ground, 0 V)."+ "description": "Ground (chip ground), 0 V reference." } ], "provenance": {@@ -154,11 +154,11 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The datasheet's pin table gives no electrical type for ANT, XC1 and XC2; they are typed bidirectiona; The datasheet names both VCC (pins 2 and 13) and VDD (pin 6) as power inputs; the text does not stat; The 2.0 V to 3.6 V supply range is stated for VDD in the operating conditions table and in the featu"+ "extractor flagged: The datasheet lists the ANT pin type as 'A' (analog/RF), which is not a KiCad ERC class; 'passive' w; Both pins are labeled VCC in the table while pin 6 is labeled VDD. The datasheet gives the supply ra; The datasheet types XC1 and XC2 as I/O and describes them as crystal input and output. Kept as bidir" ], "pages_sent": 10,- "cost_usd": 0.0421,- "at": "2026-11-13T00:29:25"+ "cost_usd": 0.0412,+ "at": "2026-11-17T19:22:21" }, "datasheet": { "url": "https://datasheet.lcsc.com/datasheet/pdf/161ba52e3541f86768d38c972c26be4f.pdf",@@ -195,7 +195,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -213,8 +213,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "6c198221201191c52aefb246986774488e1dd2352710cea8c33a928a49c30c58",- "checked": "2026-11-13",+ "sha256": "2b646b2b3efeee5f453facadda5c9f16f5d94e57e5b516d79d8422e5e7c7a5e2",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -1016,5 +1016,7 @@ ], "visibility": { "public": true- }+ },+ "description": "WL RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
wl2405.kicad_sym+1−1@@ -8,7 +8,7 @@ (stroke (width 0.254) (type default)) (fill (type background))) ) (symbol "WL2405_1_1"- (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+ (pin passive line (at -17.78 7.62 0) (length 5.08) (name "ANT" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))) )
wl2405.lbr+1−1@@ -101,7 +101,7 @@ <wire x1="-12.7" y1="-12.7" x2="-12.7" y2="10.16" width="0.254" layer="94"/> <text x="0.0000" y="12.7000" size="1.27" layer="95" align="center">>NAME</text> <text x="0.0000" y="-15.2400" size="1.27" layer="96" align="center">>VALUE</text>- <pin name="ANT" x="-17.78" y="7.62" length="middle" direction="io"/>+ <pin name="ANT" x="-17.78" y="7.62" length="middle" direction="pas"/> <pin name="VCC" x="-17.78" y="5.08" length="middle" direction="pwr"/> <pin name="PB5" x="-17.78" y="2.54" length="middle" direction="io"/> <pin name="PA0" x="-17.78" y="0" length="middle" direction="io"/>