main
Ray
Publish 0.1.0
73e7bfe
WF531RA N S8T
WF · RF Transceiver ICs · SOP-8
WF531RA N S8T from WF, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT | input | RF signal input pin for the 300-440 MHz ASK/OOK signal. |
| 2 | GND | power_in | Ground pin. |
| 3 | VDD | power_in | Power supply pin, specified at DC 2.0 V to 5.5 V (absolute maximum VDD is -0.3 V to 5.5 V). |
| 4 | SHUT | input | Shutdown control: connect to VDD for shutdown mode and to GND for operating mode. |
| 5 | DO | output | Demodulated data signal output. |
| 6 | CTH | input | Selects the reference signal mode for the internal data comparator. |
| 7 | NC | unconnected | No internal connection; leave floating. |
| 8 | REFOSC | input | External crystal connection pin; it can also be driven by an external reference clock through a coupling capacitor with 0.3 V to 0.7 V peak-to-peak amplitude. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WF |
| Package | SOP-8 |
| Category | RF & Radio |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (recommended operating) | VDD | 2 | 3.3 | 5.5 | V | 3 | |
| Operating temperature TA | TA | -40 | 125 | ℃ | 3 | ||
| Supply voltage slope | θ | 1 | mV/μs | 3 | |||
| Supply voltage VDD (absolute maximum) | VDD | -0.3 | 5.5 | V | Footnote [1]: exceeding absolute maximum ratings may cause permanent damage | 3 | |
| Interface voltage VIN (absolute maximum) | VIN | -0.3 | V | Printed upper limit is VDD+0.3 V (not numeric) | 3 | ||
| Junction temperature TJ | TJ | -40 | 150 | ℃ | 3 | ||
| Storage temperature TSTG | TSTG | -65 | 150 | ℃ | 3 | ||
| Soldering temperature TSDR | TSDR | 255 | ℃ | 持续至少 30 秒 (lasting at least 30 s) | 3 | ||
| ESD rating HBM | VHBM | -8 | 8 | kV | 人体模型(HBM), Human body model | 3 | |
| Supply voltage VDD (receiver) | VDD | 2 | 5.5 | V | 4 | ||
| Data rate DR | DR | 10 | kbps | 4 | |||
| CTH leakage current IZCTH(leak) | IZCTH(leak) | -100 | 100 | nA | TA = +85°C | 4 | |
| Crystal frequency accuracy | -20 | 20 | ppm | Reference only; acceptable crystal error limited by receiver bandwidth and transmitter RF deviation | 5 | ||
| Crystal frequency FXTAL315 | FXTAL315 | 2 | 4.897 | MHz | FRF = 315 MHz | 5 | |
| Operating frequency fRF | fRF | 315 | MHz | fRF=4.8970MHz | 4 | ||
| Operating frequency fRF | fRF | 433.92 | MHz | fRF=6.7458MHz | 4 | ||
| Operating current IOP | IOP | 4.98 | mA | fRF=315MHz, VDD=3.3V | 4 | ||
| Operating current IOP | IOP | 5.07 | mA | fRF=315MHz, VDD=5V | 4 | ||
| Standby (shutdown) current ISTBY | ISTBY | 0.01 | µA | VSHUT=VDD | 4 | ||
| Receive sensitivity | -113 | dBm | fRF = 315MHz | 4 | |||
| Receiver bandwidth BW | BW | 300 | kHz | fRF = 315MHz | 4 | ||
| IF frequency fIF | fIF | 0.86 | MHz | 4 | |||
| IF bandwidth fBW | fBW | 0.43 | MHz | 4 | |||
| Saturation input level | -20 | dBm | RSC = 50Ω | 4 | |||
| Spurious reverse isolation | 30 | µVr/ms | ANT pin, RSC = 50Ω | 4 | |||
| Reference oscillator input impedance | ZREFOSC | 290 | kΩ | 4 | |||
| Reference oscillator source current | 5.2 | µA | 4 | ||||
| Crystal oscillator frequency fT | fT | 6.7458 | MHz | 433.92M | 4 | ||
| CTH source impedance ZCTH | ZCTH | 145 | kΩ | 4 | |||
| Receiver startup time | 4 | ms | From VDD power-up to receive | 4 | |||
| SHUT startup time | 3 | ms | From SHUT pin pulled low to receive | 4 | |||
| Crystal frequency FXTAL390 | FXTAL390 | 6.063 | MHz | FRF = 390 MHz | 5 | ||
| Crystal frequency FXTAL318 | FXTAL318 | 6.4983 | MHz | FRF = 418 MHz | 5 | ||
| Crystal frequency FXTAL433.92 | FXTAL433.92 | 6.7458 | MHz | FRF = 433.92 MHz | 5 | ||
| Load capacitance CLOAD | CLOAD | 15 | pF | 5 | |||
| Crystal equivalent resistance Rm | Rm | 60 | Ω | 5 | |||
| Crystal startup time tXTAL | tXTAL | 400 | µs | 5 |
CAD (KiCad official)
- Symbol:
WF531RA N S8T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
wf531ra-n-s8t-etched.step/wf531ra-n-s8t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wf531ra-n-s8t.step/wf531ra-n-s8t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WF datasheet (6 pp, sha256
ac77977b5308375e, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# WF531RA N S8T
**WF** · RF Transceiver ICs · SOP-8
WF531RA N S8T from WF, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT | input | RF signal input pin for the 300-440 MHz ASK/OOK signal. |
| 2 | GND | power_in | Ground pin. |
| 3 | VDD | power_in | Power supply pin, specified at DC 2.0 V to 5.5 V (absolute maximum VDD is -0.3 V to 5.5 V). |
| 4 | SHUT | input | Shutdown control: connect to VDD for shutdown mode and to GND for operating mode. |
| 5 | DO | output | Demodulated data signal output. |
| 6 | CTH | input | Selects the reference signal mode for the internal data comparator. |
| 7 | NC | unconnected | No internal connection; leave floating. |
| 8 | REFOSC | input | External crystal connection pin; it can also be driven by an external reference clock through a coupling capacitor with 0.3 V to 0.7 V peak-to-peak amplitude. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WF |
| Package | SOP-8 |
| Category | RF & Radio |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (recommended operating) | VDD | 2 | 3.3 | 5.5 | V | | 3 |
| Operating temperature TA | TA | -40 | | 125 | ℃ | | 3 |
| Supply voltage slope | θ | | | 1 | mV/μs | | 3 |
| Supply voltage VDD (absolute maximum) | VDD | -0.3 | | 5.5 | V | Footnote [1]: exceeding absolute maximum ratings may cause permanent damage | 3 |
| Interface voltage VIN (absolute maximum) | VIN | -0.3 | | | V | Printed upper limit is VDD+0.3 V (not numeric) | 3 |
| Junction temperature TJ | TJ | -40 | | 150 | ℃ | | 3 |
| Storage temperature TSTG | TSTG | -65 | | 150 | ℃ | | 3 |
| Soldering temperature TSDR | TSDR | | | 255 | ℃ | 持续至少 30 秒 (lasting at least 30 s) | 3 |
| ESD rating HBM | VHBM | -8 | | 8 | kV | 人体模型(HBM), Human body model | 3 |
| Supply voltage VDD (receiver) | VDD | 2 | | 5.5 | V | | 4 |
| Data rate DR | DR | | | 10 | kbps | | 4 |
| CTH leakage current IZCTH(leak) | IZCTH(leak) | -100 | | 100 | nA | TA = +85°C | 4 |
| Crystal frequency accuracy | | -20 | | 20 | ppm | Reference only; acceptable crystal error limited by receiver bandwidth and transmitter RF deviation | 5 |
| Crystal frequency FXTAL315 | FXTAL315 | 2 | 4.897 | | MHz | FRF = 315 MHz | 5 |
| Operating frequency fRF | fRF | | 315 | | MHz | fRF=4.8970MHz | 4 |
| Operating frequency fRF | fRF | | 433.92 | | MHz | fRF=6.7458MHz | 4 |
| Operating current IOP | IOP | | 4.98 | | mA | fRF=315MHz, VDD=3.3V | 4 |
| Operating current IOP | IOP | | 5.07 | | mA | fRF=315MHz, VDD=5V | 4 |
| Standby (shutdown) current ISTBY | ISTBY | | 0.01 | | µA | VSHUT=VDD | 4 |
| Receive sensitivity | | | -113 | | dBm | fRF = 315MHz | 4 |
| Receiver bandwidth BW | BW | | 300 | | kHz | fRF = 315MHz | 4 |
| IF frequency fIF | fIF | | 0.86 | | MHz | | 4 |
| IF bandwidth fBW | fBW | | 0.43 | | MHz | | 4 |
| Saturation input level | | | -20 | | dBm | RSC = 50Ω | 4 |
| Spurious reverse isolation | | | 30 | | µVr/ms | ANT pin, RSC = 50Ω | 4 |
| Reference oscillator input impedance | ZREFOSC | | 290 | | kΩ | | 4 |
| Reference oscillator source current | | | 5.2 | | µA | | 4 |
| Crystal oscillator frequency fT | fT | | 6.7458 | | MHz | 433.92M | 4 |
| CTH source impedance ZCTH | ZCTH | | 145 | | kΩ | | 4 |
| Receiver startup time | | | 4 | | ms | From VDD power-up to receive | 4 |
| SHUT startup time | | | 3 | | ms | From SHUT pin pulled low to receive | 4 |
| Crystal frequency FXTAL390 | FXTAL390 | | 6.063 | | MHz | FRF = 390 MHz | 5 |
| Crystal frequency FXTAL318 | FXTAL318 | | 6.4983 | | MHz | FRF = 418 MHz | 5 |
| Crystal frequency FXTAL433.92 | FXTAL433.92 | | 6.7458 | | MHz | FRF = 433.92 MHz | 5 |
| Load capacitance CLOAD | CLOAD | | 15 | | pF | | 5 |
| Crystal equivalent resistance Rm | Rm | | 60 | | Ω | | 5 |
| Crystal startup time tXTAL | tXTAL | | 400 | | µs | | 5 |
## CAD (KiCad official)
- Symbol: `WF531RA N S8T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `wf531ra-n-s8t-etched.step` / `wf531ra-n-s8t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `wf531ra-n-s8t.step` / `wf531ra-n-s8t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [WF datasheet](docs/wf531ra-n-s8t-datasheet.pdf) (6 pp, sha256 `ac77977b5308375e`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/wf531ra-n-s8t-datasheet.pdf)