component
WF480RA VX S8T&R
Public Made by Adomby adom
WF RF Transceiver ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWF480RA VX S8T&R
WF · RF Transceiver ICs · SOP-8
WF480RA VX S8T&R from WF, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. |
| 2 | ANT | input | RF signal input pin. |
| 3 | VDD | power_in | Power supply pin, DC 2.0~5.5V. |
| 4 | CTH | input | Reference signal mode selection for the internal data comparator. |
| 5 | DO | output | Demodulated data signal output. |
| 6 | SHUT | input | Shutdown control: connect to supply for shutdown mode, connect to ground for operating mode. |
| 7 | NC | unconnected | Not connected, leave floating. |
| 8 | REFOSC | input | External crystal connection pin for the reference oscillator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WF |
| Package | SOP-8 |
| Category | RF & Radio |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2 | 3.3 | 5.5 | V | 3 | |
| Operating temperature | TA | -40 | 125 | ℃ | 3 | ||
| Supply voltage slew rate | θ | 1 | mV/μs | 3 | |||
| Supply voltage | VDD | -0.3 | 5.5 | V | 3 | ||
| Interface voltage | VIN | -0.3 | 6 | V | VDD+0.3 V | 3 | |
| Junction temperature | TJ | -40 | 150 | ℃ | 3 | ||
| Storage temperature | TSTG | -65 | 150 | ℃ | 3 | ||
| Soldering temperature | TSDR | 255 | ℃ | 持续至少 30 秒 | 3 | ||
| ESD rating HBM | VHBM | -8 | 8 | kV | 人体模型(HBM) | 3 | |
| Receiver supply voltage | VDD | 2 | 5.5 | V | 4 | ||
| Data rate | DR | 10 | kbps | 4 | |||
| Operating current | IOP | 4.98 | mA | fRF=315MHz,VDD=3.3V | 4 | ||
| Operating current | IOP | 5.07 | mA | fRF=315MHz,VDD=5V | 4 | ||
| Standby current | ISTBY | 0.01 | µA | VSHUT=VDD | 4 | ||
| Receiver sensitivity | -113 | dBm | fRF = 315MHz / 2kbps | 4 | |||
| Receiver bandwidth | BW | 300 | kHz | fRF = 315MHz | 4 | ||
| IF frequency | fIF | 0.86 | MHz | 4 | |||
| IF bandwidth | fBW | 0.43 | MHz | 4 | |||
| Saturation input level | -20 | dBm | RSC = 50Ω | 4 | |||
| Spurious reverse isolation | 30 | µVr/ms | ANT pin, RSC = 50Ω | 4 | |||
| Reference oscillator input impedance | ZREFOSC | 290 | kΩ | 4 | |||
| Reference oscillator source current | 5.2 | µA | 4 | ||||
| CTH source impedance | ZCTH | 145 | kΩ | 4 | |||
| CTH leakage current | IZCTH(leak) | -100 | 100 | nA | TA = +85°C | 4 | |
| Receiver startup time | 4 | ms | 从VDD上电到接收 | 4 | |||
| SHUT startup time | 3 | ms | 从SHUT引脚拉低到接收 | 4 | |||
| Crystal accuracy | -20 | 20 | ppm | 5 | |||
| Crystal load capacitance | CLOAD | 15 | pF | 5 | |||
| Crystal equivalent resistance | Rm | 60 | Ω | 5 | |||
| Crystal startup time | tXTAL | 400 | µs | 5 |
CAD (KiCad official)
- Symbol:
WF480RA VX S8T&R - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
wf480ra-vx-s8t-r-etched.step/wf480ra-vx-s8t-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wf480ra-vx-s8t-r.step/wf480ra-vx-s8t-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WF datasheet (6 pp, sha256
308b88d70a739aa5, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).