3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWF470RA NVL S16T
WF · RF Transceiver ICs · SOP-16
WF470RA NVL S16T from WF, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SEL0 | input | Selects demodulator filter bandwidth together with SEL1 and SWEN (see bandwidth table). |
| 2 | VSSRF | power_in | RF ground pin. |
| 3 | VSSRF | power_in | RF ground pin. |
| 4 | ANT | input | RF signal input pin. |
| 5 | VDDRF | power_in | RF positive supply pin (2.0V to 5.5V operating), with decoupling capacitor to ground. |
| 6 | VDDBB | power_in | Baseband positive supply pin (2.0V to 5.5V operating). |
| 7 | CTH | passive | Reference signal for the internal data comparator, set with external threshold capacitor. |
| 8 | NC | unconnected | No connection, leave floating. |
| 9 | VSSBB | power_in | Baseband ground pin. |
| 10 | DO | output | Demodulated data signal output. |
| 11 | SHUT | input | Shutdown mode when tied high to supply (0.01uA standby), operating mode when tied to ground; internally pulled up so must be pulled low in normal operation. |
| 12 | NC | unconnected | No connection. |
| 13 | CAGC | passive | External AGC capacitor pin; recommended CAGC is 0.47uF or greater. |
| 14 | SEL1 | input | Selects demodulator filter bandwidth together with SEL0 and SWEN. |
| 15 | REFOSC | passive | Reference oscillator pin for external crystal, ceramic resonator or clock (about 0.7Vpp from an MCU). |
| 16 | SWEN | input | Selects demodulator filter bandwidth together with SEL0 and SEL1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WF |
| Package | SOP-16 |
| Category | RF & Radio |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
WF470RA NVL S16T - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
wf470ra-nvl-s16t-etched.step/wf470ra-nvl-s16t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wf470ra-nvl-s16t.step/wf470ra-nvl-s16t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WF datasheet (7 pp, sha256
fddd3250a1e14c84, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).