main
Ray
Publish 0.1.0
319287f
WF100SPZ 1BG U6 AT
WF · Pressure Sensors · DIP-6
WF100SPZ 1BG U6 AT from WF, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power negative/ground (pin definition 1); must be tied to pin 6 when hardware zero adjustment is not used. |
| 2 | Vout+ | output | Positive bridge output (pin definition 1); in definition 2 this pin is Vs+ supply positive. |
| 3 | Vs+ | power_in | Positive supply (pin definition 1), 5 V typical and 10 V max constant-voltage drive or 1 mA typical and 2 mA max constant-current drive; in definition 2 this pin is Vout+. |
| 4 | NC | unconnected | Empty pin, no connection. |
| 5 | Vout- | output | Negative bridge output (pin definition 1); in definition 2 this pin is GND. |
| 6 | GND | power_in | Power negative/ground (pin definition 1); must be tied to pin 1 when hardware zero adjustment is not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WF |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Zero output range | -15 | 0 | 15 | mV | VS+=5Vdc, Ta=30°C | 2 | |
| Full-scale output range (40/100/200/700 kPa) | 60 | 80 | 100 | mV | VS+=5Vdc, Ta=30°C | 2 | |
| Bridge resistance | 4.5 | 5 | 5.5 | kΩ | VS+=5Vdc, Ta=30°C | 2 | |
| Nonlinearity | 0.2 | 0.3 | 0.5 | %FS | VS+=5Vdc, Ta=30°C | 2 | |
| Zero output temperature coefficient | 0.5 | %FS/℃ | 2 | ||||
| Full-scale output temperature coefficient TCS, constant voltage | TCS | -0.17 | -0.22 | -0.27 | %FS/℃ | constant-voltage supply | 2 |
| Full-scale output temperature coefficient TCS, constant current | TCS | -0.05 | 0.025 | 0.05 | %FS/℃ | constant-current supply | 2 |
| Resistance temperature coefficient | 1500 | 2000 | 2500 | ppm/℃ | 2 | ||
| Stability | 0.2 | %FS/Y | 2 | ||||
| Hysteresis | 0.2 | %FS/Y | 2 | ||||
| Operating temperature | -40 | 125 | ℃ | 2 | |||
| Storage temperature | -40 | 150 | ℃ | 2 | |||
| Constant-voltage supply | VS+ | 5 | 10 | V | constant-voltage supply | 2 | |
| Constant-current supply | 1 | 2 | mA | constant-current supply | 2 | ||
| Pressure overload (5/40/100/200 kPa) | 3 | X | 2 |
CAD (KiCad official)
- Symbol:
WF100SPZ 1BG U6 AT - Footprint:
Package_DIP:DIP-6_W7.62mm - 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files:
wf100spz-1bg-u6-at-etched.step/wf100spz-1bg-u6-at-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wf100spz-1bg-u6-at.step/wf100spz-1bg-u6-at.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WF datasheet (3 pp, sha256
f997cfbdf3407b85, retrieved 2026-10-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# WF100SPZ 1BG U6 AT
**WF** · Pressure Sensors · DIP-6
WF100SPZ 1BG U6 AT from WF, in a DIP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power negative/ground (pin definition 1); must be tied to pin 6 when hardware zero adjustment is not used. |
| 2 | Vout+ | output | Positive bridge output (pin definition 1); in definition 2 this pin is Vs+ supply positive. |
| 3 | Vs+ | power_in | Positive supply (pin definition 1), 5 V typical and 10 V max constant-voltage drive or 1 mA typical and 2 mA max constant-current drive; in definition 2 this pin is Vout+. |
| 4 | NC | unconnected | Empty pin, no connection. |
| 5 | Vout- | output | Negative bridge output (pin definition 1); in definition 2 this pin is GND. |
| 6 | GND | power_in | Power negative/ground (pin definition 1); must be tied to pin 1 when hardware zero adjustment is not used. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WF |
| Package | DIP-6 |
| Category | Sensors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Zero output range | | -15 | 0 | 15 | mV | VS+=5Vdc, Ta=30°C | 2 |
| Full-scale output range (40/100/200/700 kPa) | | 60 | 80 | 100 | mV | VS+=5Vdc, Ta=30°C | 2 |
| Bridge resistance | | 4.5 | 5 | 5.5 | kΩ | VS+=5Vdc, Ta=30°C | 2 |
| Nonlinearity | | 0.2 | 0.3 | 0.5 | %FS | VS+=5Vdc, Ta=30°C | 2 |
| Zero output temperature coefficient | | | | 0.5 | %FS/℃ | | 2 |
| Full-scale output temperature coefficient TCS, constant voltage | TCS | -0.17 | -0.22 | -0.27 | %FS/℃ | constant-voltage supply | 2 |
| Full-scale output temperature coefficient TCS, constant current | TCS | -0.05 | 0.025 | 0.05 | %FS/℃ | constant-current supply | 2 |
| Resistance temperature coefficient | | 1500 | 2000 | 2500 | ppm/℃ | | 2 |
| Stability | | | | 0.2 | %FS/Y | | 2 |
| Hysteresis | | | | 0.2 | %FS/Y | | 2 |
| Operating temperature | | -40 | | 125 | ℃ | | 2 |
| Storage temperature | | -40 | | 150 | ℃ | | 2 |
| Constant-voltage supply | VS+ | | 5 | 10 | V | constant-voltage supply | 2 |
| Constant-current supply | | | 1 | 2 | mA | constant-current supply | 2 |
| Pressure overload (5/40/100/200 kPa) | | | 3 | | X | | 2 |
## CAD (KiCad official)
- Symbol: `WF100SPZ 1BG U6 AT`
- Footprint: `Package_DIP:DIP-6_W7.62mm`
- 3D model: DIP-6 (KiCad packages3D, STEP)
- 3D model files: `wf100spz-1bg-u6-at-etched.step` / `wf100spz-1bg-u6-at-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `wf100spz-1bg-u6-at.step` / `wf100spz-1bg-u6-at.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [WF datasheet](docs/wf100spz-1bg-u6-at-datasheet.pdf) (3 pp, sha256 `f997cfbdf3407b85`, retrieved 2026-10-24, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/wf100spz-1bg-u6-at-datasheet.pdf)