main
Ray w5100s-l: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 22c7631
{
  "slug": "w5100s-l",
  "version": "0.1.0",
  "type": "component",
  "description": "WIZNET Ethernet Transceivers, LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "w5100s-l",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "w5100s-l.kicad_sym",
    "w5100s-l.kicad_mod",
    "w5100s-l.glb",
    "w5100s-l.step",
    "w5100s-l.lbr",
    "docs/hero.png",
    "docs/w5100s-l-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "W5100S-L",
    "manufacturer": "WIZNET",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Interface",
    "subcategory": "Ethernet Transceivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586185150207680512",
    "parts": {
      "symbol": "w5100s-l.kicad_sym",
      "footprint": "w5100s-l.kicad_mod",
      "model_3d": "w5100s-l-etched.glb",
      "model_3d_plain": "w5100s-l.glb",
      "model_3d_step": "w5100s-l-etched.step",
      "model_3d_step_plain": "w5100s-l.step",
      "lbr": "w5100s-l.lbr"
    },
    "distributor_links": {
      "lcsc": "C194673"
    },
    "pins": [
      {
        "number": "1",
        "name": "GNDA",
        "type": "power_in",
        "description": "Analog ground connection."
      },
      {
        "number": "2",
        "name": "TXON",
        "type": "output",
        "description": "Differential transmitted signal pair (negative); differential data is transmitted to media via TXOP/TXON signal pair on MDI mode."
      },
      {
        "number": "3",
        "name": "TXOP",
        "type": "output",
        "description": "Differential transmitted signal pair (positive); differential data is transmitted to media via TXOP/TXON signal pair on MDI mode."
      },
      {
        "number": "4",
        "name": "1V2A",
        "type": "power_in",
        "description": "Analog 1.2V power; supplied from 1V20 voltage source."
      },
      {
        "number": "5",
        "name": "RXIN",
        "type": "input",
        "description": "Differential received signal pair (negative); differential data is received from media via RXIP/RXIN signal pair on MDI mode."
      },
      {
        "number": "6",
        "name": "RXIP",
        "type": "input",
        "description": "Differential received signal pair (positive); differential data is received from media via RXIP/RXIN signal pair on MDI mode."
      },
      {
        "number": "7",
        "name": "GNDA",
        "type": "power_in",
        "description": "Analog ground connection."
      },
      {
        "number": "8",
        "name": "3V3A",
        "type": "power_in",
        "description": "Analog 3.3V power."
      },
      {
        "number": "9",
        "name": "RSET_BG",
        "type": "output",
        "description": "Off-chip bias resistor connection; must be connected to analog ground through external 12.3kΩ ±1% resistor."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Digital ground connection."
      },
      {
        "number": "11",
        "name": "XSCO",
        "type": "output",
        "description": "25MHz clock output for crystal oscillator (TXAL) or external oscillator; used for internal clock stabilization."
      },
      {
        "number": "12",
        "name": "XSCI",
        "type": "input",
        "description": "25MHz clock input for crystal oscillator (TXAL) or external oscillator; used for internal clock stabilization."
      },
      {
        "number": "13",
        "name": "1V2D",
        "type": "power_in",
        "description": "Digital 1.2V power; supplied from 1V20 voltage source."
      },
      {
        "number": "14",
        "name": "1V2O",
        "type": "power_out",
        "description": "Internal regulator 1.2V power output with maximum 150mA capacity; must use ferrite bead filter and 3.3µF external capacitors."
      },
      {
        "number": "15",
        "name": "3V3A",
        "type": "power_in",
        "description": "Analog 3.3V power."
      },
      {
        "number": "16",
        "name": "GNDA",
        "type": "power_in",
        "description": "Analog ground connection."
      },
      {
        "number": "17",
        "name": "LNKn",
        "type": "output",
        "description": "Link status LED output; low indicates link up, high indicates link down (valid in SPI and parallel bus modes)."
      },
      {
        "number": "18",
        "name": "SPDn",
        "type": "output",
        "description": "Link speed LED output; low indicates 100Mbps, high indicates 10Mbps (valid in SPI and parallel bus modes)."
      },
      {
        "number": "19",
        "name": "DPXn",
        "type": "output",
        "description": "Link duplex LED output; low indicates full-duplex, high indicates half-duplex (valid in SPI and parallel bus modes)."
      },
      {
        "number": "20",
        "name": "ACTn",
        "type": "output",
        "description": "Link activity LED output; flashes during link up with TX/RX, high during link down (valid in SPI and parallel bus modes)."
      },
      {
        "number": "21",
        "name": "COLn",
        "type": "output",
        "description": "Link collision detect LED output; low indicates collision detected, high indicates no collision (valid in SPI and parallel bus modes)."
      },
      {
        "number": "22",
        "name": "1V2D",
        "type": "power_in",
        "description": "Digital 1.2V power; supplied from 1V20 voltage source."
      },
      {
        "number": "23",
        "name": "GND",
        "type": "power_in",
        "description": "Digital ground connection."
      },
      {
        "number": "24",
        "name": "3V3D",
        "type": "power_in",
        "description": "Digital 3.3V power."
      },
      {
        "number": "25",
        "name": "MOD[0]",
        "type": "input",
        "description": "Interface mode selection bit 0; modes: 0000=SPI, 010X=parallel bus; must be strapped before chip enable."
      },
      {
        "number": "26",
        "name": "MOD[1]",
        "type": "input",
        "description": "Interface mode selection bit 1; modes: 0000=SPI, 010X=parallel bus; must be strapped before chip enable."
      },
      {
        "number": "27",
        "name": "MOD[2]",
        "type": "input",
        "description": "Interface mode selection bit 2; modes: 0000=SPI, 010X=parallel bus; must be strapped before chip enable."
      },
      {
        "number": "28",
        "name": "MOD[3]",
        "type": "input",
        "description": "Interface mode selection bit 3; modes: 0000=SPI, 010X=parallel bus; must be strapped before chip enable."
      },
      {
        "number": "29",
        "name": "CSn",
        "type": "input",
        "description": "Chip select input with internal 75kΩ pull-up resistor; low selects W5100S, high deselects."
      },
      {
        "number": "30",
        "name": "SCLK",
        "type": "input",
        "description": "SPI clock input in SPI mode; must be connected to GND or floated in parallel bus mode."
      },
      {
        "number": "31",
        "name": "1V2D",
        "type": "power_in",
        "description": "Digital 1.2V power; supplied from 1V20 voltage source."
      },
      {
        "number": "32",
        "name": "MOSI/ADDR0",
        "type": "input",
        "description": "SPI master output slave input (data input) in SPI mode; address bit 0 in parallel bus mode."
      },
      {
        "number": "33",
        "name": "MISO/ADDR1",
        "type": "bidirectional",
        "description": "SPI master input slave output (data output) in SPI mode; address bit 1 in parallel bus mode."
      },
      {
        "number": "34",
        "name": "RDn",
        "type": "input",
        "description": "Read strobe input with internal 75kΩ pull-up resistor in parallel bus mode; must be connected to 3V3D or floated in SPI mode."
      },
      {
        "number": "35",
        "name": "WRn",
        "type": "input",
        "description": "Write strobe input with internal 75kΩ pull-up resistor in parallel bus mode indicating write operation."
      },
      {
        "number": "36",
        "name": "3V3D",
        "type": "power_in",
        "description": "Digital 3.3V power."
      },
      {
        "number": "37",
        "name": "DAT0",
        "type": "bidirectional",
        "description": "8-bit data bus bit 0; receives or transmits data from/to host in parallel bus mode; must be floated in SPI mode."
      },
      {
        "number": "38",
        "name": "DAT1",
        "type": "bidirectional",
        "description": "8-bit data bus bit 1 with internal 75kΩ pull-down resistor; receives or transmits data in parallel bus mode; must be floated in SPI mode."
      },
      {
        "number": "39",
        "name": "DAT2",
        "type": "bidirectional",
        "description": "8-bit data bus bit 2 with internal 75kΩ pull-down resistor; receives or transmits data in parallel bus mode; must be floated in SPI mode."
      },
      {
        "number": "40",
        "name": "DAT3",
        "type": "bidirectional",
        "description": "8-bit data bus bit 3 with internal 75kΩ pull-down resistor; receives or transmits data in parallel bus mode; must be floated in SPI mode."
      },
      {
        "number": "41",
        "name": "DAT4",
        "type": "bidirectional",
        "description": "8-bit data bus bit 4 with internal 75kΩ pull-down resistor; receives or transmits data in parallel bus mode; must be floated in SPI mode."
      },
      {
        "number": "42",
        "name": "DAT5",
        "type": "bidirectional",
        "description": "8-bit data bus bit 5 with internal 75kΩ pull-down resistor; receives or transmits data in parallel bus mode; must be floated in SPI mode."
      },
      {
        "number": "43",
        "name": "DAT6",
        "type": "bidirectional",
        "description": "8-bit data bus bit 6; receives or transmits data from/to host in parallel bus mode; must be floated in SPI mode."
      },
      {
        "number": "44",
        "name": "DAT7",
        "type": "bidirectional",
        "description": "8-bit data bus bit 7; receives or transmits data from/to host in parallel bus mode; must be floated in SPI mode."
      },
      {
        "number": "45",
        "name": "1V2D",
        "type": "power_in",
        "description": "Digital 1.2V power; supplied from 1V20 voltage source."
      },
      {
        "number": "46",
        "name": "GND",
        "type": "power_in",
        "description": "Digital ground connection."
      },
      {
        "number": "47",
        "name": "INTn",
        "type": "output",
        "description": "Interrupt output to host; low indicates interrupt occurred, high indicates no interrupt; polarity controlled via MR2[IEN]."
      },
      {
        "number": "48",
        "name": "RSTn",
        "type": "input",
        "description": "Reset input with internal pull-up resistor; must be asserted low for minimum 500ns; W5100S requires 60.3ms initialization after reset release."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 109,
        "cost_usd": 0.9374,
        "at": "2026-09-22T06:41:49"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586185150207680512",
        "pages": 109,
        "sha256": "fca425bbdeeb7ace",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "w5100s-l.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "w5100s-l-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ba959c93b82469eaf5500b19d4e2fd19548d6e575d0e319a8074ef7ec24337ae",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}