W25R128JVSIQ

{
  "slug": "w25r128jvsiq",
  "version": "0.1.0",
  "type": "component",
  "description": "Winbond Elec NOR FLASH, SOIC-8-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "w25r128jvsiq",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "w25r128jvsiq.kicad_sym",
    "w25r128jvsiq.kicad_mod",
    "w25r128jvsiq.glb",
    "w25r128jvsiq.step",
    "w25r128jvsiq.lbr",
    "docs/hero.png",
    "docs/w25r128jvsiq-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "w25r128jvsiq-hero.glb",
    "w25r128jvsiq-hero.overlay.json",
    "w25r128jvsiq-etched.glb"
  ],
  "component": {
    "mpn": "W25R128JVSIQ",
    "manufacturer": "Winbond Elec",
    "package": "SOIC-8-208mil",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8601054509221363712",
    "parts": {
      "symbol": "w25r128jvsiq.kicad_sym",
      "footprint": "w25r128jvsiq.kicad_mod",
      "model_3d": "w25r128jvsiq-hero.glb",
      "model_3d_plain": "w25r128jvsiq-etched.glb",
      "model_3d_step": "w25r128jvsiq-etched.step",
      "model_3d_step_plain": "w25r128jvsiq.step",
      "lbr": "w25r128jvsiq.lbr"
    },
    "distributor_links": {
      "lcsc": "C6604694",
      "mouser": "454-W25R128JVSIQ"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T09:17:52Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "error"
      },
      "mouser": {
        "pn": "454-W25R128JVSIQ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "/CS",
        "type": "input",
        "description": "Chip Select Input: when high the device is deselected and the serial data outputs are high impedance, and /CS must track the VCC supply level at power-up and power-down."
      },
      {
        "number": "2",
        "name": "IO1",
        "type": "bidirectional",
        "description": "Data Input Output 1, used for Standard and Dual SPI instructions (DO in Standard SPI)."
      },
      {
        "number": "3",
        "name": "IO2",
        "type": "bidirectional",
        "description": "Data Input Output 2, used for Quad SPI instructions only."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "5",
        "name": "IO0",
        "type": "bidirectional",
        "description": "Data Input Output 0, used for Standard and Dual SPI instructions (DI in Standard SPI)."
      },
      {
        "number": "6",
        "name": "CLK",
        "type": "input",
        "description": "Serial Clock Input providing the timing for serial input and output operations; SPI clock up to 133MHz is supported."
      },
      {
        "number": "7",
        "name": "IO3",
        "type": "bidirectional",
        "description": "Data Input Output 3, used for Quad SPI instructions only."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power Supply, specified for a single 2.7V to 3.6V supply."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Figure 1a labels the 8-pin SOIC as package code SS, while the Ordering Information and Valid Part Nu; Section 4.4 describes a dedicated /RESET pin and says 'On the 16-pin SOIC package', but the 8-pin SO; The pin numbers come from the pin description table in section 3.3 (page 6); the figure text extract"
        ],
        "pages_sent": 12,
        "cost_usd": 0.045,
        "at": "2026-10-19T09:17:39"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8601054509221363712",
        "pages": 77,
        "sha256": "e73054a9e75feb1f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "w25r128jvsiq.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "w25r128jvsiq-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f2697692eb8f4dbe3e44ee4c71bc407c73d5a74fd4b7691cc175a783f2465d90",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}