component
W25Q64JWZPIQ TR
Public Made by Adomby adom
Winbond Elec NOR FLASH, WSON-8(5x6). Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownW25Q64JWZPIQ TR
Winbond Elec · NOR FLASH · WSON-8(5x6)
W25Q64JWZPIQ TR from Winbond Elec, in a WSON-8(5x6). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /CS | input | Chip Select input, active low. When high, DO/IO pins are high-impedance and the device is deselected (standby). When low, the device is selected and instructions can be written / data read. /CS must track VCC at power-up (use a pull-up if needed). |
| 2 | DO (IO1) | bidirectional | Serial Data Output for Standard SPI (unidirectional DO, sampled/output on falling CLK edge). Becomes bidirectional IO1 for Dual/Quad SPI instructions. |
| 3 | /WP (IO2) | bidirectional | Write Protect input, active low. Works with the Status Register CMP/SEC/TB/BP2/BP1/BP0 and SRP bits to hardware-protect part or all of the array. Becomes bidirectional IO2 when Quad SPI is enabled (QE=1 in Status Register-2). |
| 4 | GND | power_in | Device ground reference. |
| 5 | DI (IO0) | bidirectional | Serial Data Input for Standard SPI (unidirectional DI; instructions/addresses/data clocked in on rising CLK edge). Becomes bidirectional IO0 for Dual/Quad SPI instructions. |
| 6 | CLK | input | Serial Clock input. Provides timing for all serial input and output operations. Supports up to 133 MHz. |
| 7 | /HOLD or /RESET (IO3) | bidirectional | Multifunction pin. In Standard/Dual SPI acts as active-low /HOLD (pauses the device while /CS is low) or, if configured, active-low /RESET. Becomes bidirectional IO3 when Quad SPI is enabled (QE=1 in Status Register-2), at which point /HOLD/RESET functionality is not available. |
| 8 | VCC | power_in | Power supply, 1.7 V to 1.95 V (nominal 1.8 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Winbond Elec |
| Package | WSON-8(5x6) |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
W25Q64JWZPIQ TRW25Q64JWZPIQ TRZPIMW25Q64JWZPIQ TRZPITW25Q64JWZPIQ TRSSIQW25Q64JWZPIQ TRSSIMW25Q64JWZPIQ TRSSITW25Q64JWZPIQ TRZEIQW25Q64JWZPIQ TRZEIMW25Q64JWZPIQ TRZEITW25Q64JWZPIQ TRUUIQW25Q64JWZPIQ TRUUIMW25Q64JWZPIQ TRUUITW25Q64JWZPIQ TRXGIQW25Q64JWZPIQ TRXGIMW25Q64JWZPIQ TRXGITW25Q64JWZPIQ TRTBIQW25Q64JWZPIQ TRTBIMW25Q64JWZPIQ TRTBITW25Q64JWZPIQ TRBYIQW25Q64JWZPIQ TRBYIMW25Q64JWZPIQ TRBYIT
CAD (KiCad official)
- Symbol:
W25Q64JWZPIQ TR - Footprint:
Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8(5x6) (KiCad packages3D, STEP)
- 3D model files:
w25q64jwzpiq-tr-etched.step/w25q64jwzpiq-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);w25q64jwzpiq-tr.step/w25q64jwzpiq-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Winbond Elec datasheet (76 pp, sha256
0b43eb45e9d35317, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).