W25Q512JVFIQ

{
 "schema": "adom.pads/1",
 "slug": "w25q512jvfiq",
 "footprint": "SOIC-16_3.9x9.9mm_P1.27mm",
 "generated_from": {
  "footprint": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -4.445
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c"
 },
 "pad_count": 16,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "/HOLD or /RESET (IO3)",
   "type": "bidirectional",
   "description": "Hold input in Standard/Dual SPI (active low pauses transactions while /CS is low). Becomes bidirectional IO3 when Quad Enable (QE) bit is set for Quad SPI operation. On ordering suffix -IM this pin functions as /RESET instead of /HOLD.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "VCC",
   "type": "power_in",
   "description": "Power supply. Single 2.7 V to 3.6 V supply for the device core and I/O.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "/RESET",
   "type": "input",
   "description": "Dedicated hardware reset input, active low. Driving low for ~1 µs terminates any external or internal operation and returns the device to its power-on state. If unused, leave floating or tie to VCC.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "NC",
   "type": "unconnected",
   "description": "No Connect / Do Not Use. Leave unconnected.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "NC",
   "type": "unconnected",
   "description": "No Connect / Do Not Use. Leave unconnected.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "NC",
   "type": "unconnected",
   "description": "No Connect / Do Not Use. Leave unconnected.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "/CS",
   "type": "input",
   "description": "SPI Chip Select input, active low. When high the device is deselected and DO/IO0-IO3 are Hi-Z; when low the device is selected for instruction, address, and data transfers. Must track VCC at power-up/down; an external pull-up is recommended.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "DO (IO1)",
   "type": "bidirectional",
   "description": "Standard SPI unidirectional data output (DO), clocked on the falling edge of CLK. In Dual/Quad SPI modes this pin is bidirectional IO1.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "/WP (IO2)",
   "type": "bidirectional",
   "description": "Write Protect input, active low; used with the Status Register block-protect and SRP bits to hardware-protect regions of the array. When Quad Enable (QE) bit is set, this pin becomes bidirectional IO2 for Quad SPI operation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground return.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "NC",
   "type": "unconnected",
   "description": "No Connect / Do Not Use. Leave unconnected.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "NC",
   "type": "unconnected",
   "description": "No Connect / Do Not Use. Leave unconnected.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "NC",
   "type": "unconnected",
   "description": "No Connect / Do Not Use. Leave unconnected.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "NC",
   "type": "unconnected",
   "description": "No Connect / Do Not Use. Leave unconnected.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "DI (IO0)",
   "type": "bidirectional",
   "description": "Standard SPI unidirectional data input (DI) latched on the rising edge of CLK. In Dual/Quad SPI modes this pin is bidirectional IO0.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "CLK",
   "type": "input",
   "description": "SPI Serial Clock input. Provides the timing reference for all serial input/output operations, up to 133 MHz.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}